#!/usr/bin/sh
### SYSTEM ARCHITECTURE
# Determine the architecture type of this system.
# Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97
xxOsRevMajor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f1`;
if [ "$xxOsRevMajor" -ge 10 ]; then
# This system is running >= 10.x
# Tested on 10.01 PA1.x and 10.20 PA[12].x.
# Idea: Scan /usr/include/sys/unistd.h for matches with
# "#define CPU_* `getconf # CPU_VERSION`" to determine CPU type.
# Note the text following "CPU_" is used, *NOT* the comment.
#
# ASSUMPTIONS: Numbers will continue to be defined in hex -- and in
# /usr/include/sys/unistd.h -- and the CPU_* #defines will be kept
# up to date with new CPU/OS releases.
xxcpu=`getconf CPU_VERSION`; # Get the number.
xxcpu=`printf '0x%x' $xxcpu`; # convert to hex
archname=`sed -n -e "s/^#[[:space:]]*define[[:space:]]*CPU_//p" /usr/include/sys/unistd.h |
sed -n -e "s/[[:space:]]*$xxcpu[[:space:]].*//p" |
sed -e s/_RISC/-RISC/ -e s/HP_// -e s/_/./ -e "s/[[:space:]]*//g"`;
else
# This system is running <= 9.x
# Tested on 9.0[57] PA and [78].0 MC680[23]0. Idea: After removing
# MC6888[12] from context string, use first CPU identifier.
#
# ASSUMPTION: Only CPU identifiers contain no lowercase letters.
archname=`getcontext | tr ' ' '\012' | grep -v '[a-z]' | grep -v MC688 |
sed -e 's/HP-//' -e 1q`;
selecttype='int *'
fi
# For some strange reason, the u32align test from Configure hangs in
# HP-UX 10.20 since the December 2001 patches. So hint it to avoid
# the test.
if [ "$xxOsRevMajor" -le 10 ]; then
d_u32align=$define
fi
echo "Archname is $archname"
# Fix XSlib (CPAN) confusion when re-using a prefix but changing from ILP32
# to LP64 builds. They're NOT binary compatible, so quit claiming they are.
archname64=LP64
### HP-UX OS specific behaviour
# -ldbm is obsolete and should not be used
# -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion
# -lPW is obsolete and should not be used
# The libraries crypt, malloc, ndir, and net are empty.
set `echo "X $libswanted " | sed -e 's/ ld / /' -e 's/ dbm / /' -e 's/ BSD / /' -e 's/ PW / /'`
shift
libswanted="$*"
cc=${cc:-cc}
ar=/usr/bin/ar # Yes, truly override. We do not want the GNU ar.
full_ar=$ar # I repeat, no GNU ar. arrr.
set `echo "X $ccflags " | sed -e 's/ -A[ea] / /' -e 's/ -D_HPUX_SOURCE / /'`
shift
cc_cppflags="$* -D_HPUX_SOURCE"
cppflags="-Aa -D__STDC_EXT__ $cc_cppflags"
case "$prefix" in
"") prefix='/opt/perl5' ;;
esac
gnu_as=no
gnu_ld=no
case `$cc -v 2>&1`"" in
*gcc*) ccisgcc="$define"
ccflags="$cc_cppflags"
if [ "X$gccversion" = "X" ]; then
# Done too late in Configure if hinted
gccversion=`$cc --version | sed 's/.*(GCC) *//'`
fi
case "$gccversion" in
[012]*) # HP-UX and gcc-2.* break UINT32_MAX :-(
ccflags="$ccflags -DUINT32_MAX_BROKEN"
;;
3*) # GCC (both 32bit and 64bit) will define __STDC_EXT__
# by default when using GCC 3.0 and newer versions of
# the compiler.
cppflags="$cc_cppflags"
;;
esac
case "`getconf KERNEL_BITS 2>/dev/null`" in
*64*)
echo "main(){}">try.c
case "$gccversion" in
3*)
case "$archname" in
PA-RISC*)
case "$ccflags" in
*-mpa-risc*) ;;
*) ccflags="$ccflags -mpa-risc-2-0" ;;
esac
;;
esac
;;
*) # gcc with gas will not accept +DA2.0
case "`$cc -c -Wa,+DA2.0 try.c 2>&1`" in
*"+DA2.0"*) # gas
gnu_as=yes
;;
*) # HPas
ccflags="$ccflags -Wa,+DA2.0"
;;
esac
;;
esac
# gcc with gld will not accept +vnocompatwarnings
case "`$cc -o try -Wl,+vnocompatwarnings try.c 2>&1`" in
*"+vnocompat"*) # gld
gnu_ld=yes
;;
*) # HPld
case "$gccversion" in
[12]*)
# Why not 3 as well here?
# Since not relevant to IA64, not changed.
ldflags="$ldflags -Wl,+vnocompatwarnings"
ccflags="$ccflags -Wl,+vnocompatwarnings"
;;
esac
;;
esac
rm -f try.c
;;
esac
;;
*) ccisgcc=''
ccversion=`which cc | xargs what | awk '/Compiler/{print $2}'`
case "$ccflags" in
"-Ae "*) ;;
*) ccflags="-Ae $cc_cppflags -Wl,+vnocompatwarnings" ;;
esac
# Needed because cpp does only support -Aa (not -Ae)
cpplast='-'
cppminus='-'
cppstdin='cc -E -Aa -D__STDC_EXT__'
cpprun=$cppstdin
# case "$d_casti32" in
# "") d_casti32='undef' ;;
# esac
;;
esac
# When HP-UX runs a script with "#!", it sets argv[0] to the script name.
toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"'
### 64 BITNESS
# Some gcc versions do native 64 bit long (e.g. 2.9-hppa-000310 and gcc-3.0)
# We have to force 64bitness to go search the right libraries
gcc_64native=no
case "$ccisgcc" in
$define|true|[Yy])
echo 'int main(){long l;printf("%d\\n",sizeof(l));}'>try.c
$cc -o try $ccflags $ldflags try.c
if [ "`try`" = "8" ]; then
cat <<EOM >&4
*** This version of gcc uses 64 bit longs. -Duse64bitall is
*** implicitly set to enable continuation
EOM
use64bitall=$define
gcc_64native=yes
fi
;;
esac
case "$use64bitall" in
$define|true|[yY]*) use64bitint="$define" ;;
esac
case "$usemorebits" in
$define|true|[yY]*) use64bitint="$define"; uselongdouble="$define" ;;
esac
case "$archname" in
IA64*)
# While here, override so=sl auto-detection
so='so'
;;
*)
case "$uselongdouble" in
*) ;;
$define|true|[yY]*)
cat <<EOM >&4
*** long doubles are not (yet) supported on HP-UX (any version)
*** Until it does, we cannot continue, aborting.
EOM
exit 1 ;;
esac
;;
esac
case "$use64bitint" in
$define|true|[Yy])
if [ "$xxOsRevMajor" -lt 11 ]; then
cat <<EOM >&4
*** 64-bit compilation is not supported on HP-UX $xxOsRevMajor.
*** You need at least HP-UX 11.0.
*** Cannot continue, aborting.
EOM
exit 1
fi
# Set libc and the library paths
case "$archname" in
PA-RISC*)
loclibpth="$loclibpth /lib/pa20_64"
libc='/lib/pa20_64/libc.sl' ;;
IA64*)
loclibpth="$loclibpth /usr/lib/hpux64"
libc='/usr/lib/hpux64/libc.so' ;;
esac
if [ ! -f "$libc" ]; then
cat <<EOM >&4
*** You do not seem to have the 64-bit libc.
*** I cannot find the file $libc.
*** Cannot continue, aborting.
EOM
exit 1
fi
case "$ccisgcc" in
$define|true|[Yy])
# For the moment, don't care that it ain't supported (yet)
# by gcc (up to and including 2.95.3), cause it'll crash
# anyway. Expect auto-detection of 64-bit enabled gcc on
# HP-UX soon, including a user-friendly exit
case $gcc_64native in
no) case "$gccversion" in
[123]*) ccflags="$ccflags -mlp64"
case "$archname" in
PA-RISC*)
ldflags="$ldflags -Wl,+DD64"
;;
IA64*)
ldflags="$ldflags -mlp64"
;;
esac
;;
esac
;;
esac
;;
*)
ccflags="$ccflags +DD64"
ldflags="$ldflags +DD64"
;;
esac
# Reset the library checker to make sure libraries
# are the right type
# (NOTE: on IA64, this doesn't work with .a files.)
libscheck='case "`/usr/bin/file $xxx`" in
*ELF-64*|*LP64*|*PA-RISC2.0*) ;;
*) xxx=/no/64-bit$xxx ;;
esac'
;;
*) # Not in 64-bit mode
case "$archname" in
PA-RISC*)
libc='/lib/libc.sl' ;;
IA64*)
loclibpth="$loclibpth /usr/lib/hpux32"
libc='/usr/lib/hpux32/libc.so' ;;
esac
;;
esac
# By setting the deferred flag below, this means that if you run perl
# on a system that does not have the required shared library that you
# linked it with, it will die when you try to access a symbol in the
# (missing) shared library. If you would rather know at perl startup
# time that you are missing an important shared library, switch the
# comments so that immediate, rather than deferred loading is
# performed. Even with immediate loading, you can postpone errors for
# undefined (or multiply defined) routines until actual access by
# adding the "nonfatal" option.
# ccdlflags="-Wl,-E -Wl,-B,immediate $ccdlflags"
# ccdlflags="-Wl,-E -Wl,-B,immediate,-B,nonfatal $ccdlflags"
if [ "$gnu_ld" = "yes" ]; then
ccdlflags="-Wl,-E $ccdlflags"
else
ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags"
fi
### COMPILER SPECIFICS
## Local restrictions (point to README.hpux to lift these)
## Optimization limits
cat >try.c <<EOF
#include <sys/resource.h>
int main ()
{
struct rlimit rl;
int i = getrlimit (RLIMIT_DATA, &rl);
printf ("%d\n", rl.rlim_cur / (1024 * 1024));
} /* main */
EOF
$cc -o try $ccflags $ldflags try.c
maxdsiz=`try`
rm -f try try.c core
if [ $maxdsiz -le 64 ]; then
# 64 Mb is probably not enough to optimize toke.c
# and regexp.c with -O2
cat <<EOM >&4
Your kernel limits the data section of your programs to $maxdsiz Mb,
which is (sadly) not enough to fully optimize some parts of the
perl binary. I'll try to use a lower optimization level for
those parts. If you are a sysadmin, and you *do* want full
optimization, raise the 'maxdsiz' kernel configuration parameter
to at least 0x08000000 (128 Mb) and rebuild your kernel.
EOM
regexec_cflags=''
doop_cflags=''
fi
case "$ccisgcc" in
$define|true|[Yy])
case "$optimize" in
"") optimize="-g -O" ;;
*O[3456789]*) optimize=`echo "$optimize" | sed -e 's/O[3-9]/O2/'` ;;
esac
#ld="$cc"
ld=/usr/bin/ld
cccdlflags='-fPIC'
#lddlflags='-shared'
lddlflags='-b'
case "$optimize" in
*-g*-O*|*-O*-g*)
# gcc without gas will not accept -g
echo "main(){}">try.c
case "`$cc $optimize -c try.c 2>&1`" in
*"-g option disabled"*)
set `echo "X $optimize " | sed -e 's/ -g / /'`
shift
optimize="$*"
;;
esac
;;
esac
if [ $maxdsiz -le 64 ]; then
case "$optimize" in
*O2*) opt=`echo "$optimize" | sed -e 's/O2/O1/'`
toke_cflags="$toke_cflags;optimize=\"$opt\""
regexec_cflags="optimize=\"$opt\""
;;
esac
fi
;;
*) # HP's compiler cannot combine -g and -O
case "$optimize" in
"") optimize="+O2 +Onolimit" ;;
*O[3456789]*) optimize=`echo "$optimize" | sed -e 's/O[3-9]/O2/'` ;;
esac
case "$optimize" in
*-O*|\
*O2*) opt=`echo "$optimize" | sed -e 's/-O/+O2/' -e 's/O2/O1/' -e 's/ *+Onolimit//'`
;;
*) opt="$optimize"
;;
esac
if [ $maxdsiz -le 64 ]; then
toke_cflags="$toke_cflags;optimize=\"$opt\""
regexec_cflags="optimize=\"$opt\""
fi
case "$archname" in
IA64*)
doop_cflags="optimize=\"$opt\""
;;
esac
ld=/usr/bin/ld
cccdlflags='+Z'
lddlflags='-b +vnocompatwarnings'
;;
esac
## LARGEFILES
#case "$uselargefiles-$ccisgcc" in
# "$define-$define"|'-define')
# cat <<EOM >&4
#
#*** I'm ignoring large files for this build because
#*** I don't know how to do use large files in HP-UX using gcc.
#
#EOM
# uselargefiles="$undef"
# ;;
# esac
cat >UU/uselargefiles.cbu <<'EOCBU'
# This script UU/uselargefiles.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use large files.
case "$uselargefiles" in
""|$define|true|[yY]*)
# there are largefile flags available via getconf(1)
# but we cheat for now. (Keep that in the left margin.)
ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
case " $ccflags " in
*" $ccflags_uselargefiles "*) ;;
*) ccflags="$ccflags $ccflags_uselargefiles" ;;
esac
if test -z "$ccisgcc" -a -z "$gccversion"; then
# The strict ANSI mode (-Aa) doesn't like large files.
ccflags=`echo " $ccflags "|sed 's@ -Aa @ @g'`
case "$ccflags" in
*-Ae*) ;;
*) ccflags="$ccflags -Ae" ;;
esac
fi
;;
esac
EOCBU
# THREADING
# This script UU/usethreads.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use threads.
cat >UU/usethreads.cbu <<'EOCBU'
case "$usethreads" in
$define|true|[yY]*)
if [ "$xxOsRevMajor" -lt 10 ]; then
cat <<EOM >&4
HP-UX $xxOsRevMajor cannot support POSIX threads.
Consider upgrading to at least HP-UX 11.
Cannot continue, aborting.
EOM
exit 1
fi
if [ "$xxOsRevMajor" -eq 10 ]; then
# Under 10.X, a threaded perl can be built
if [ -f /usr/include/pthread.h ]; then
if [ -f /usr/lib/libcma.sl ]; then
# DCE (from Core OS CD) is installed
# Check if it is pristine, or patched
cmavsn=`what /usr/lib/libcma.sl 2>&1 | grep 1996`
if [ ! -z "$cmavsn" ]; then
cat <<EOM >&4
***************************************************************************
Perl will support threading through /usr/lib/libcma.sl from
the HP DCE package, but the version found is too old to be
reliable.
If you are not depending on this specific version of the library,
consider to upgrade using patch PHSS_23672 (read README.hpux)
***************************************************************************
(sleeping for 10 seconds...)
EOM
sleep 10
fi
# It needs # libcma and OLD_PTHREADS_API. Also
# <pthread.h> needs to be #included before any
# other includes (in perl.h)
# HP-UX 10.X uses the old pthreads API
d_oldpthreads="$define"
# include libcma before all the others
libswanted="cma $libswanted"
# tell perl.h to include <pthread.h> before other
# include files
ccflags="$ccflags -DPTHREAD_H_FIRST"
# First column on purpose:
# this is not a standard Configure variable
# but we need to get this noticed.
pthread_h_first="$define"
# HP-UX 10.X seems to have no easy
# way of detecting these *time_r protos.
d_gmtime_r_proto='define'
gmtime_r_proto='REENTRANT_PROTO_I_TS'
d_localtime_r_proto='define'
localtime_r_proto='REENTRANT_PROTO_I_TS'
# Avoid the poisonous conflicting (and irrelevant)
# prototypes of setkey().
i_crypt="$undef"
# CMA redefines select to cma_select, and cma_select
# expects int * instead of fd_set * (just like 9.X)
selecttype='int *'
elif [ -f /usr/lib/libpthread.sl ]; then
# PTH package is installed
libswanted="pthread $libswanted"
else
libswanted="no_threads_available"
fi
else
libswanted="no_threads_available"
fi
if [ $libswanted = "no_threads_available" ]; then
cat <<EOM >&4
In HP-UX 10.X for POSIX threads you need both of the files
/usr/include/pthread.h and either /usr/lib/libcma.sl or /usr/lib/libpthread.sl.
Either you must upgrade to HP-UX 11 or install a posix thread library:
DCE-CoreTools from HP-UX 10.20 Hardware Extensions 3.0 CD (B3920-13941)
or
PTH package from e.g. http://hpux.tn.tudelft.nl/hppd/hpux/alpha.html
Cannot continue, aborting.
EOM
exit 1
fi
else
# 12 may want upping the _POSIX_C_SOURCE datestamp...
ccflags=" -D_POSIX_C_SOURCE=199506L -D_REENTRANT $ccflags"
set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
shift
libswanted="$*"
fi
;;
esac
EOCBU
# The mysterious io_xs memory corruption in 11.00 32bit seems to get
# fixed by not using Perl's malloc. Flip side is performance loss.
# So we want mymalloc for all situations possible
usemymalloc='y'
case "$usethreads" in
$define|true|[yY]*) usemymalloc='n' ;;
*) case "$ccisgcc" in
$undef|false|[nN]*)
case "$use64bitint" in
$undef|false|[nN]*)
case "$ccflags" in
*-DDEBUGGING*) ;;
*) usemymalloc='n' ;;
esac
;;
esac
;;
esac
;;
esac
usemymalloc='n'
case "$useperlio" in
$undef|false|[nN]*) usemymalloc='y' ;;
esac
# fpclassify() is a macro, the library call is Fpclassify
# Similarly with the others below.
d_fpclassify='define'
d_isnan='define'
d_isinf='define'
d_isfinite='define'
d_unordered='define'
# Next one(s) need the leading tab. These are special 'hint' symbols that
# are not to be propagated to config.sh, all related to pthreads draft 4
# interfaces.
case "$d_oldpthreads" in
''|$undef)
d_crypt_r_proto='undef'
d_getgrent_r_proto='undef'
d_getpwent_r_proto='undef'
d_strerror_r_proto='undef'
;;
esac
|
