=head1 NAME
perlfaq8 - System Interaction ($Revision: 1.8 $, $Date: 2002/05/16 12:41:42 $)
=head1 DESCRIPTION
This section of the Perl FAQ covers questions involving operating
system interaction. Topics include interprocess communication (IPC),
control over the user-interface (keyboard, screen and pointing
devices), and most anything else not related to data manipulation.
Read the FAQs and documentation specific to the port of perl to your
operating system (eg, L<perlvms>, L<perlplan9>, ...). These should
contain more detailed information on the vagaries of your perl.
=head2 How do I find out which operating system I'm running under?
The $^O variable ($OSNAME if you use English) contains an indication of
the name of the operating system (not its release number) that your perl
binary was built for.
=head2 How come exec() doesn't return?
Because that's what it does: it replaces your currently running
program with a different one. If you want to keep going (as is
probably the case if you're asking this question) use system()
instead.
=head2 How do I do fancy stuff with the keyboard/screen/mouse?
How you access/control keyboards, screens, and pointing devices
("mice") is system-dependent. Try the following modules:
=over 4
=item Keyboard
Term::Cap Standard perl distribution
Term::ReadKey CPAN
Term::ReadLine::Gnu CPAN
Term::ReadLine::Perl CPAN
Term::Screen CPAN
=item Screen
Term::Cap Standard perl distribution
Curses CPAN
Term::ANSIColor CPAN
=item Mouse
Tk CPAN
=back
Some of these specific cases are shown below.
=head2 How do I print something out in color?
In general, you don't, because you don't know whether
the recipient has a color-aware display device. If you
know that they have an ANSI terminal that understands
color, you can use the Term::ANSIColor module from CPAN:
use Term::ANSIColor;
print color("red"), "Stop!\n", color("reset");
print color("green"), "Go!\n", color("reset");
Or like this:
use Term::ANSIColor qw(:constants);
print RED, "Stop!\n", RESET;
print GREEN, "Go!\n", RESET;
=head2 How do I read just one key without waiting for a return key?
Controlling input buffering is a remarkably system-dependent matter.
On many systems, you can just use the B<stty> command as shown in
L<perlfunc/getc>, but as you see, that's already getting you into
portability snags.
open(TTY, "+</dev/tty") or die "no tty: $!";
system "stty cbreak </dev/tty >/dev/tty 2>&1";
$key = getc(TTY); # perhaps this works
# OR ELSE
sysread(TTY, $key, 1); # probably this does
system "stty -cbreak </dev/tty >/dev/tty 2>&1";
The Term::ReadKey module from CPAN offers an easy-to-use interface that
should be more efficient than shelling out to B<stty> for each key.
It even includes limited support for Windows.
use Term::ReadKey;
ReadMode('cbreak');
$key = ReadKey(0);
ReadMode('normal');
However, using the code requires that you have a working C compiler
and can use it to build and install a CPAN module. Here's a solution
using the standard POSIX module, which is already on your systems
(assuming your system supports POSIX).
use HotKey;
$key = readkey();
And here's the HotKey module, which hides the somewhat mystifying calls
to manipulate the POSIX termios structures.
# HotKey.pm
package HotKey;
@ISA = qw(Exporter);
@EXPORT = qw(cbreak cooked readkey);
use strict;
use POSIX qw(:termios_h);
my ($term, $oterm, $echo, $noecho, $fd_stdin);
$fd_stdin = fileno(STDIN);
$term = POSIX::Termios->new();
$term->getattr($fd_stdin);
$oterm = $term->getlflag();
$echo = ECHO | ECHOK | ICANON;
$noecho = $oterm & ~$echo;
sub cbreak {
$term->setlflag($noecho); # ok, so i don't want echo either
$term->setcc(VTIME, 1);
$term->setattr($fd_stdin, TCSANOW);
}
sub cooked {
$term->setlflag($oterm);
$term->setcc(VTIME, 0);
$term->setattr($fd_stdin, TCSANOW);
}
sub readkey {
my $key = '';
cbreak();
sysread(STDIN, $key, 1);
cooked();
return $key;
}
END { cooked() }
1;
=head2 How do I check whether input is ready on the keyboard?
The easiest way to do this is to read a key in nonblocking mode with the
Term::ReadKey module from CPAN, passing it an argument of -1 to indicate
not to block:
use Term::ReadKey;
ReadMode('cbreak');
if (defined ($char = ReadKey(-1)) ) {
# input was waiting and it was $char
} else {
# no input was waiting
}
ReadMode('normal'); # restore normal tty settings
=head2 How do I clear the screen?
If you only have do so infrequently, use C<system>:
system("clear");
If you have to do this a lot, save the clear string
so you can print it 100 times without calling a program
100 times:
$clear_string = `clear`;
print $clear_string;
If you're planning on doing other screen manipulations, like cursor
positions, etc, you might wish to use Term::Cap module:
use Term::Cap;
$terminal = Term::Cap->Tgetent( {OSPEED => 9600} );
$clear_string = $terminal->Tputs('cl');
=head2 How do I get the screen size?
If you have Term::ReadKey module installed from CPAN,
you can use it to fetch the width and height in characters
and in pixels:
use Term::ReadKey;
($wchar, $hchar, $wpixels, $hpixels) = GetTerminalSize();
This is more portable than the raw C<ioctl>, but not as
illustrative:
require 'sys/ioctl.ph';
die "no TIOCGWINSZ " unless defined &TIOCGWINSZ;
open(TTY, "+</dev/tty") or die "No tty: $!";
unless (ioctl(TTY, &TIOCGWINSZ, $winsize='')) {
die sprintf "$0: ioctl TIOCGWINSZ (%08x: $!)\n", &TIOCGWINSZ;
}
($row, $col, $xpixel, $ypixel) = unpack('S4', $winsize);
print "(row,col) = ($row,$col)";
print " (xpixel,ypixel) = ($xpixel,$ypixel)" if $xpixel || $ypixel;
print "\n";
=head2 How do I ask the user for a password?
(This question has nothing to do with the web. See a different
FAQ for that.)
There's an example of this in L<perlfunc/crypt>). First, you put the
terminal into "no echo" mode, then just read the password normally.
You may do this with an old-style ioctl() function, POSIX terminal
control (see L<POSIX> or its documentation the Camel Book), or a call
to the B<stty> program, with varying degrees of portability.
You can also do this for most systems using the Term::ReadKey module
from CPAN, which is easier to use and in theory more portable.
use Term::ReadKey;
ReadMode('noecho');
$password = ReadLine(0);
=head2 How do I read and write the serial port?
This depends on which operating system your program is running on. In
the case of Unix, the serial ports will be accessible through files in
/dev; on other systems, device names will doubtless differ.
Several problem areas common to all device interaction are the
following:
=over 4
=item lockfiles
Your system may use lockfiles to control multiple access. Make sure
you follow the correct protocol. Unpredictable behavior can result
from multiple processes reading from one device.
=item open mode
If you expect to use both read and write operations on the device,
you'll have to open it for update (see L<perlfunc/"open"> for
details). You may wish to open it without running the risk of
blocking by using sysopen() and C<O_RDWR|O_NDELAY|O_NOCTTY> from the
Fcntl module (part of the standard perl distribution). See
L<perlfunc/"sysopen"> for more on this approach.
=item end of line
Some devices will be expecting a "\r" at the end of each line rather
than a "\n". In some ports of perl, "\r" and "\n" are different from
their usual (Unix) ASCII values of "\012" and "\015". You may have to
give the numeric values you want directly, using octal ("\015"), hex
("0x0D"), or as a control-character specification ("\cM").
print DEV "atv1\012"; # wrong, for some devices
print DEV "atv1\015"; # right, for some devices
Even though with normal text files a "\n" will do the trick, there is
still no unified scheme for terminating a line that is portable
between Unix, DOS/Win, and Macintosh, except to terminate I<ALL> line
ends with "\015\012", and strip what you don't need from the output.
This applies especially to socket I/O and autoflushing, discussed
next.
=item flushing output
If you expect characters to get to your device when you print() them,
you'll want to autoflush that filehandle. You can use select()
and the C<$|> variable to control autoflushing (see L<perlvar/$|>
and L<perlfunc/select>, or L<perlfaq5>, ``How do I flush/unbuffer an
output filehandle? Why must I do this?''):
$oldh = select(DEV);
$| = 1;
select($oldh);
You'll also see code that does this without a temporary variable, as in
select((select(DEV), $| = 1)[0]);
Or if you don't mind pulling in a few thousand lines
of code just because you're afraid of a little $| variable:
use IO::Handle;
DEV->autoflush(1);
As mentioned in the previous item, this still doesn't work when using
socket I/O between Unix and Macintosh. You'll need to hard code your
line terminators, in that case.
=item non-blocking input
If you are doing a blocking read() or sysread(), you'll have to
arrange for an alarm handler to provide a timeout (see
L<perlfunc/alarm>). If you have a non-blocking open, you'll likely
have a non-blocking read, which means you may have to use a 4-arg
select() to determine whether I/O is ready on that device (see
L<perlfunc/"select">.
=back
While trying to read from his caller-id box, the notorious Jamie Zawinski
<jwz@netscape.com>, after much gnashing of teeth and fighting with sysread,
sysopen, POSIX's tcgetattr business, and various other functions that
go bump in the night, finally came up with this:
sub open_modem {
use IPC::Open2;
my $stty = `/bin/stty -g`;
open2( \*MODEM_IN, \*MODEM_OUT, "cu -l$modem_device -s2400 2>&1");
# starting cu hoses /dev/tty's stty settings, even when it has
# been opened on a pipe...
system("/bin/stty $stty");
$_ = <MODEM_IN>;
chomp;
if ( !m/^Connected/ ) {
print STDERR "$0: cu printed `$_' instead of `Connected'\n";
}
}
=head2 How do I decode encrypted password files?
You spend lots and lots of money on dedicated hardware, but this is
bound to get you talked about.
Seriously, you can't if they are Unix password files--the Unix
password system employs one-way encryption. It's more like hashing than
encryption. The best you can check is whether something else hashes to
the same string. You can't turn a hash back into the original string.
Programs like Crack
can forcibly (and intelligently) try to guess passwords, but don't
(can't) guarantee quick success.
If you're worried about users selecting bad passwords, you should
proactively check when they try to change their password (by modifying
passwd(1), for example).
=head2 How do I start a process in the background?
You could use
system("cmd &")
or you could use fork as documented in L<perlfunc/"fork">, with
further examples in L<perlipc>. Some things to be aware of, if you're
on a Unix-like system:
=over 4
=item STDIN, STDOUT, and STDERR are shared
Both the main process and the backgrounded one (the "child" process)
share the same STDIN, STDOUT and STDERR filehandles. If both try to
access them at once, strange things can happen. You may want to close
or reopen these for the child. You can get around this with
C<open>ing a pipe (see L<perlfunc/"open">) but on some systems this
means that the child process cannot outlive the parent.
=item Signals
You'll have to catch the SIGCHLD signal, and possibly SIGPIPE too.
SIGCHLD is sent when the backgrounded process finishes. SIGPIPE is
sent when you write to a filehandle whose child process has closed (an
untrapped SIGPIPE can cause your program to silently die). This is
not an issue with C<system("cmd&")>.
=item Zombies
You have to be prepared to "reap" the child process when it finishes
$SIG{CHLD} = sub { wait };
See L<perlipc/"Signals"> for other examples of code to do this.
Zombies are not an issue with C<system("prog &")>.
=back
=head2 How do I trap control characters/signals?
You don't actually "trap" a control character. Instead, that character
generates a signal which is sent to your terminal's currently
foregrounded process group, which you then trap in your process.
Signals are documented in L<perlipc/"Signals"> and the
section on ``Signals'' in the Camel.
Be warned that very few C libraries are re-entrant. Therefore, if you
attempt to print() in a handler that got invoked during another stdio
operation your internal structures will likely be in an
inconsistent state, and your program will dump core. You can
sometimes avoid this by using syswrite() instead of print().
Unless you're exceedingly careful, the only safe things to do inside a
signal handler are (1) set a variable and (2) exit. In the first case,
you should only set a variable in such a way that malloc() is not
called (eg, by setting a variable that already has a value).
For example:
$Interrupted = 0; # to ensure it has a value
$SIG{INT} = sub {
$Interrupted++;
syswrite(STDERR, "ouch\n", 5);
}
However, because syscalls restart by default, you'll find that if
you're in a "slow" call, such as <FH>, read(), connect(), or
wait(), that the only way to terminate them is by "longjumping" out;
that is, by raising an exception. See the time-out handler for a
blocking flock() in L<perlipc/"Signals"> or the section on ``Signals''
in the Camel book.
=head2 How do I modify the shadow password file on a Unix system?
If perl was installed correctly and your shadow library was written
properly, the getpw*() functions described in L<perlfunc> should in
theory provide (read-only) access to entries in the shadow password
file. To change the file, make a new shadow password file (the format
varies from system to system--see L<passwd(5)> for specifics) and use
pwd_mkdb(8) to install it (see L<pwd_mkdb(8)> for more details).
=head2 How do I set the time and date?
Assuming you're running under sufficient permissions, you should be
able to set the system-wide date and time by running the date(1)
program. (There is no way to set the time and date on a per-process
basis.) This mechanism will work for Unix, MS-DOS, Windows, and NT;
the VMS equivalent is C<set time>.
However, if all you want to do is change your time zone, you can
probably get away with setting an environment variable:
$ENV{TZ} = "MST7MDT"; # unixish
$ENV{'SYS$TIMEZONE_DIFFERENTIAL'}="-5" # vms
system "trn comp.lang.perl.misc";
=head2 How can I sleep() or alarm() for under a second?
If you want finer granularity than the 1 second that the sleep()
function provides, the easiest way is to use the select() function as
documented in L<perlfunc/"select">. Try the Time::HiRes and
the BSD::Itimer modules (available from CPAN, and starting from
Perl 5.8 Time::HiRes is part of the standard distribution).
=head2 How can I measure time under a second?
In general, you may not be able to. The Time::HiRes module (available
from CPAN, and starting from Perl 5.8 part of the standard distribution)
provides this functionality for some systems.
If your system supports both the syscall() function in Perl as well as
a system call like gettimeofday(2), then you may be able to do
something like this:
require 'sys/syscall.ph';
$TIMEVAL_T = "LL";
$done = $start = pack($TIMEVAL_T, ());
syscall(&SYS_gettimeofday, $start, 0) != -1
or die "gettimeofday: $!";
##########################
# DO YOUR OPERATION HERE #
##########################
syscall( &SYS_gettimeofday, $done, 0) != -1
or die "gettimeofday: $!";
@start = unpack($TIMEVAL_T, $start);
@done = unpack($TIMEVAL_T, $done);
# fix microseconds
for ($done[1], $start[1]) { $_ /= 1_000_000 }
$delta_time = sprintf "%.4f", ($done[0] + $done[1] )
-
($start[0] + $start[1] );
=head2 How can I do an atexit() or setjmp()/longjmp()? (Exception handling)
Release 5 of Perl added the END block, which can be used to simulate
atexit(). Each package's END block is called when the program or
thread ends (see L<perlmod> manpage for more details).
For example, you can use this to make sure your filter program
managed to finish its output without filling up the disk:
END {
close(STDOUT) || die "stdout close failed: $!";
}
The END block isn't called when untrapped signals kill the program,
though, so if you use END blocks you should also use
use sigtrap qw(die normal-signals);
Perl's exception-handling mechanism is its eval() operator. You can
use eval() as setjmp and die() as longjmp. For details of this, see
the section on signals, especially the time-out handler for a blocking
flock() in L<perlipc/"Signals"> or the section on ``Signals'' in
the Camel Book.
If exception handling is all you're interested in, try the
exceptions.pl library (part of the standard perl distribution).
If you want the atexit() syntax (and an rmexit() as well), try the
AtExit module available from CPAN.
=head2 Why doesn't my sockets program work under System V (Solaris)? What does the error message "Protocol not supported" mean?
Some Sys-V based systems, notably Solaris 2.X, redefined some of the
standard socket constants. Since these were constant across all
architectures, they were often hardwired into perl code. The proper
way to deal with this is to "use Socket" to get the correct values.
Note that even though SunOS and Solaris are binary compatible, these
values are different. Go figure.
=head2 How can I call my system's unique C functions from Perl?
In most cases, you write an external module to do it--see the answer
to "Where can I learn about linking C with Perl? [h2xs, xsubpp]".
However, if the function is a system call, and your system supports
syscall(), you can use the syscall function (documented in
L<perlfunc>).
Remember to check the modules that came with your distribution, and
CPAN as well--someone may already have written a module to do it.
=head2 Where do I get the include files to do ioctl() or syscall()?
Historically, these would be generated by the h2ph tool, part of the
standard perl distribution. This program converts cpp(1) directives
in C header files to files containing subroutine definitions, like
&SYS_getitimer, which you can use as arguments to your functions.
It doesn't work perfectly, but it usually gets most of the job done.
Simple files like F<errno.h>, F<syscall.h>, and F<socket.h> were fine,
but the hard ones like F<ioctl.h> nearly always need to hand-edited.
Here's how to install the *.ph files:
1. become super-user
2. cd /usr/include
3. h2ph *.h */*.h
If your system supports dynamic loading, for reasons of portability and
sanity you probably ought to use h2xs (also part of the standard perl
distribution). This tool converts C header files to Perl extensions.
See L<perlxstut> for how to get started with h2xs.
If your system doesn't support dynamic loading, you still probably
ought to use h2xs. See L<perlxstut> and L<ExtUtils::MakeMaker> for
more information (in brief, just use B<make perl> instead of a plain
B<make> to rebuild perl with a new static extension).
=head2 Why do setuid perl scripts complain about kernel problems?
Some operating systems have bugs in the kernel that make setuid
scripts inherently insecure. Perl gives you a number of options
(described in L<perlsec>) to work around such systems.
=head2 How can I open a pipe both to and from a command?
The IPC::Open2 module (part of the standard perl distribution) is an
easy-to-use approach that internally uses pipe(), fork(), and exec() to do
the job. Make sure you read the deadlock warnings in its documentation,
though (see L<IPC::Open2>). See
L<perlipc/"Bidirectional Communication with Another Process"> and
L<perlipc/"Bidirectional Communication with Yourself">
You may also use the IPC::Open3 module (part of the standard perl
distribution), but be warned that it has a different order of
arguments from IPC::Open2 (see L<IPC::Open3>).
=head2 Why can't I get the output of a command with system()?
You're confusing the purpose of system() and backticks (``). system()
runs a command and returns exit status information (as a 16 bit value:
the low 7 bits are the signal the process died from, if any, and
the high 8 bits are the actual exit value). Backticks (``) run a
command and return what it sent to STDOUT.
$exit_status = system("mail-users");
$output_string = `ls`;
=head2 How can I capture STDERR from an external command?
There are three basic ways of running external commands:
system $cmd; # using system()
$output = `$cmd`; # using backticks (``)
open (PIPE, "cmd |"); # using open()
With system(), both STDOUT and STDERR will go the same place as the
script's STDOUT and STDERR, unless the system() command redirects them.
Backticks and open() read B<only> the STDOUT of your command.
With any of these, you can change file descriptors before the call:
open(STDOUT, ">logfile");
system("ls");
or you can use Bourne shell file-descriptor redirection:
$output = `$cmd 2>some_file`;
open (PIPE, "cmd 2>some_file |");
You can also use file-descriptor redirection to make STDERR a
duplicate of STDOUT:
$output = `$cmd 2>&1`;
open (PIPE, "cmd 2>&1 |");
Note that you I<cannot> simply open STDERR to be a dup of STDOUT
in your Perl program and avoid calling the shell to do the redirection.
This doesn't work:
open(STDERR, ">&STDOUT");
$alloutput = `cmd args`; # stderr still escapes
This fails because the open() makes STDERR go to where STDOUT was
going at the time of the open(). The backticks then make STDOUT go to
a string, but don't change STDERR (which still goes to the old
STDOUT).
Note that you I<must> use Bourne shell (sh(1)) redirection syntax in
backticks, not csh(1)! Details on why Perl's system() and backtick
and pipe opens all use the Bourne shell are in the
F<versus/csh.whynot> article in the "Far More Than You Ever Wanted To
Know" collection in http://www.cpan.org/olddoc/FMTEYEWTK.tgz . To
capture a command's STDERR and STDOUT together:
$output = `cmd 2>&1`; # either with backticks
$pid = open(PH, "cmd 2>&1 |"); # or with an open pipe
while (<PH>) { } # plus a read
To capture a command's STDOUT but discard its STDERR:
$output = `cmd 2>/dev/null`; # either with backticks
$pid = open(PH, "cmd 2>/dev/null |"); # or with an open pipe
while (<PH>) { } # plus a read
To capture a command's STDERR but discard its STDOUT:
$output = `cmd 2>&1 1>/dev/null`; # either with backticks
$pid = open(PH, "cmd 2>&1 1>/dev/null |"); # or with an open pipe
while (<PH>) { } # plus a read
To exchange a command's STDOUT and STDERR in order to capture the STDERR
but leave its STDOUT to come out our old STDERR:
$output = `cmd 3>&1 1>&2 2>&3 3>&-`; # either with backticks
$pid = open(PH, "cmd 3>&1 1>&2 2>&3 3>&-|");# or with an open pipe
while (<PH>) { } # plus a read
To read both a command's STDOUT and its STDERR separately, it's easiest
and safest to redirect them separately to files, and then read from those
files when the program is done:
system("program args 1>/tmp/program.stdout 2>/tmp/program.stderr");
Ordering is important in all these examples. That's because the shell
processes file descriptor redirections in strictly left to right order.
system("prog args 1>tmpfile 2>&1");
system("prog args 2>&1 1>tmpfile");
The first command sends both standard out and standard error to the
temporary file. The second command sends only the old standard output
there, and the old standard error shows up on the old standard out.
=head2 Why doesn't open() return an error when a pipe open fails?
If the second argument to a piped C<open> contains shell
metacharacters, perl fork()s, then exec()s a shell to decode the
metacharacters and eventually run the desired program. If the program
couldn't be run, it's the shell that gets the message, not Perl. All
your Perl program can find out is whether the shell itself could be
successfully started. You can still capture the shell's STDERR and
check it for error messages. See L<"How can I capture STDERR from an
external command?"> elsewhere in this document, or use the
L<IPC::Open3> module.
If there are no shell metacharacters in the argument of C<open>, Perl
runs the command directly, without using the shell, and can correctly
report whether the command started.
=head2 What's wrong with using backticks in a void context?
Strictly speaking, nothing. Stylistically speaking, it's not a good
way to write maintainable code. Perl has several operators for
running external commands. Backticks are one; they collect the output
from the command for use in your program. The C<system> function is
another; it doesn't do this.
Writing backticks in your program sends a clear message to the readers
of your code that you wanted to collect the output of the command.
Why send a clear message that isn't true?
Consider this line:
`cat /etc/termcap`;
You forgot to check C<$?> to see whether the program even ran
correctly. Even if you wrote
print `cat /etc/termcap`;
this code could and probably should be written as
system("cat /etc/termcap") == 0
or die "cat program failed!";
which will get the output quickly (as it is generated, instead of only
at the end) and also check the return value.
system() also provides direct control over whether shell wildcard
processing may take place, whereas backticks do not.
=head2 How can I call backticks without shell processing?
This is a bit tricky. Instead of writing
@ok = `grep @opts '$search_string' @filenames`;
You have to do this:
my @ok = ();
if (open(GREP, "-|")) {
while (<GREP>) {
chomp;
push(@ok, $_);
}
close GREP;
} else {
exec 'grep', @opts, $search_string, @filenames;
}
Just as with system(), no shell escapes happen when you exec() a list.
Further examples of this can be found in L<perlipc/"Safe Pipe Opens">.
Note that if you're stuck on Microsoft, no solution to this vexing issue
is even possible. Even if Perl were to emulate fork(), you'd still
be hosed, because Microsoft gives no argc/argv-style API. Their API
always reparses from a single string, which is fundamentally wrong,
but you're not likely to get the Gods of Redmond to acknowledge this
and fix it for you.
=head2 Why can't my script read from STDIN after I gave it EOF (^D on Unix, ^Z on MS-DOS)?
Some stdio's set error and eof flags that need clearing. The
POSIX module defines clearerr() that you can use. That is the
technically correct way to do it. Here are some less reliable
workarounds:
=over 4
=item 1
Try keeping around the seekpointer and go there, like this:
$where = tell(LOG);
seek(LOG, $where, 0);
=item 2
If that doesn't work, try seeking to a different part of the file and
then back.
=item 3
If that doesn't work, try seeking to a different part of
the file, reading something, and then seeking back.
=item 4
If that doesn't work, give up on your stdio package and use sysread.
=back
=head2 How can I convert my shell script to perl?
Learn Perl and rewrite it. Seriously, there's no simple converter.
Things that are awkward to do in the shell are easy to do in Perl, and
this very awkwardness is what would make a shell->perl converter
nigh-on impossible to write. By rewriting it, you'll think about what
you're really trying to do, and hopefully will escape the shell's
pipeline datastream paradigm, which while convenient for some matters,
causes many inefficiencies.
=head2 Can I use perl to run a telnet or ftp session?
Try the Net::FTP, TCP::Client, and Net::Telnet modules (available from
CPAN). http://www.cpan.org/scripts/netstuff/telnet.emul.shar
will also help for emulating the telnet protocol, but Net::Telnet is
quite probably easier to use..
If all you want to do is pretend to be telnet but don't need
the initial telnet handshaking, then the standard dual-process
approach will suffice:
use IO::Socket; # new in 5.004
$handle = IO::Socket::INET->new('www.perl.com:80')
|| die "can't connect to port 80 on www.perl.com: $!";
$handle->autoflush(1);
if (fork()) { # XXX: undef means failure
select($handle);
print while <STDIN>; # everything from stdin to socket
} else {
print while <$handle>; # everything from socket to stdout
}
close $handle;
exit;
=head2 How can I write expect in Perl?
Once upon a time, there was a library called chat2.pl (part of the
standard perl distribution), which never really got finished. If you
find it somewhere, I<don't use it>. These days, your best bet is to
look at the Expect module available from CPAN, which also requires two
other modules from CPAN, IO::Pty and IO::Stty.
=head2 Is there a way to hide perl's command line from programs such as "ps"?
First of all note that if you're doing this for security reasons (to
avoid people seeing passwords, for example) then you should rewrite
your program so that critical information is never given as an
argument. Hiding the arguments won't make your program completely
secure.
To actually alter the visible command line, you can assign to the
variable $0 as documented in L<perlvar>. This won't work on all
operating systems, though. Daemon programs like sendmail place their
state there, as in:
$0 = "orcus [accepting connections]";
=head2 I {changed directory, modified my environment} in a perl script. How come the change disappeared when I exited the script? How do I get my changes to be visible?
=over 4
=item Unix
In the strictest sense, it can't be done--the script executes as a
different process from the shell it was started from. Changes to a
process are not reflected in its parent--only in any children
created after the change. There is shell magic that may allow you to
fake it by eval()ing the script's output in your shell; check out the
comp.unix.questions FAQ for details.
=back
=head2 How do I close a process's filehandle without waiting for it to complete?
Assuming your system supports such things, just send an appropriate signal
to the process (see L<perlfunc/"kill">). It's common to first send a TERM
signal, wait a little bit, and then send a KILL signal to finish it off.
=head2 How do I fork a daemon process?
If by daemon process you mean one that's detached (disassociated from
its tty), then the following process is reported to work on most
Unixish systems. Non-Unix users should check their Your_OS::Process
module for other solutions.
=over 4
=item *
Open /dev/tty and use the TIOCNOTTY ioctl on it. See L<tty(4)>
for details. Or better yet, you can just use the POSIX::setsid()
function, so you don't have to worry about process groups.
=item *
Change directory to /
=item *
Reopen STDIN, STDOUT, and STDERR so they're not connected to the old
tty.
=item *
Background yourself like this:
fork && exit;
=back
The Proc::Daemon module, available from CPAN, provides a function to
perform these actions for you.
=head2 How do I find out if I'm running interactively or not?
Good question. Sometimes C<-t STDIN> and C<-t STDOUT> can give clues,
sometimes not.
if (-t STDIN && -t STDOUT) {
print "Now what? ";
}
On POSIX systems, you can test whether your own process group matches
the current process group of your controlling terminal as follows:
use POSIX qw/getpgrp tcgetpgrp/;
open(TTY, "/dev/tty") or die $!;
$tpgrp = tcgetpgrp(fileno(*TTY));
$pgrp = getpgrp();
if ($tpgrp == $pgrp) {
print "foreground\n";
} else {
print "background\n";
}
=head2 How do I timeout a slow event?
Use the alarm() function, probably in conjunction with a signal
handler, as documented in L<perlipc/"Signals"> and the section on
``Signals'' in the Camel. You may instead use the more flexible
Sys::AlarmCall module available from CPAN.
=head2 How do I set CPU limits?
Use the BSD::Resource module from CPAN.
=head2 How do I avoid zombies on a Unix system?
Use the reaper code from L<perlipc/"Signals"> to call wait() when a
SIGCHLD is received, or else use the double-fork technique described
in L<perlfunc/fork>.
=head2 How do I use an SQL database?
There are a number of excellent interfaces to SQL databases. See the
DBD::* modules available from http://www.cpan.org/modules/DBD .
A lot of information on this can be found at http://dbi.perl.org/
=head2 How do I make a system() exit on control-C?
You can't. You need to imitate the system() call (see L<perlipc> for
sample code) and then have a signal handler for the INT signal that
passes the signal on to the subprocess. Or you can check for it:
$rc = system($cmd);
if ($rc & 127) { die "signal death" }
=head2 How do I open a file without blocking?
If you're lucky enough to be using a system that supports
non-blocking reads (most Unixish systems do), you need only to use the
O_NDELAY or O_NONBLOCK flag from the Fcntl module in conjunction with
sysopen():
use Fcntl;
sysopen(FH, "/tmp/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644)
or die "can't open /tmp/somefile: $!":
=head2 How do I install a module from CPAN?
The easiest way is to have a module also named CPAN do it for you.
This module comes with perl version 5.004 and later.
$ perl -MCPAN -e shell
cpan shell -- CPAN exploration and modules installation (v1.59_54)
ReadLine support enabled
cpan> install Some::Module
To manually install the CPAN module, or any well-behaved CPAN module
for that matter, follow these steps:
=over 4
=item 1
Unpack the source into a temporary area.
=item 2
perl Makefile.PL
=item 3
make
=item 4
make test
=item 5
make install
=back
If your version of perl is compiled without dynamic loading, then you
just need to replace step 3 (B<make>) with B<make perl> and you will
get a new F<perl> binary with your extension linked in.
See L<ExtUtils::MakeMaker> for more details on building extensions.
See also the next question, ``What's the difference between require
and use?''.
=head2 What's the difference between require and use?
Perl offers several different ways to include code from one file into
another. Here are the deltas between the various inclusion constructs:
1) do $file is like eval `cat $file`, except the former
1.1: searches @INC and updates %INC.
1.2: bequeaths an *unrelated* lexical scope on the eval'ed code.
2) require $file is like do $file, except the former
2.1: checks for redundant loading, skipping already loaded files.
2.2: raises an exception on failure to find, compile, or execute $file.
3) require Module is like require "Module.pm", except the former
3.1: translates each "::" into your system's directory separator.
3.2: primes the parser to disambiguate class Module as an indirect object.
4) use Module is like require Module, except the former
4.1: loads the module at compile time, not run-time.
4.2: imports symbols and semantics from that package to the current one.
In general, you usually want C<use> and a proper Perl module.
=head2 How do I keep my own module/library directory?
When you build modules, use the PREFIX option when generating
Makefiles:
perl Makefile.PL PREFIX=/u/mydir/perl
then either set the PERL5LIB environment variable before you run
scripts that use the modules/libraries (see L<perlrun>) or say
use lib '/u/mydir/perl';
This is almost the same as
BEGIN {
unshift(@INC, '/u/mydir/perl');
}
except that the lib module checks for machine-dependent subdirectories.
See Perl's L<lib> for more information.
=head2 How do I add the directory my program lives in to the module/library search path?
use FindBin;
use lib "$FindBin::Bin";
use your_own_modules;
=head2 How do I add a directory to my include path at runtime?
Here are the suggested ways of modifying your include path:
the PERLLIB environment variable
the PERL5LIB environment variable
the perl -Idir command line flag
the use lib pragma, as in
use lib "$ENV{HOME}/myown_perllib";
The latter is particularly useful because it knows about machine
dependent architectures. The lib.pm pragmatic module was first
included with the 5.002 release of Perl.
=head2 What is socket.ph and where do I get it?
It's a perl4-style file defining values for system networking
constants. Sometimes it is built using h2ph when Perl is installed,
but other times it is not. Modern programs C<use Socket;> instead.
=head1 AUTHOR AND COPYRIGHT
Copyright (c) 1997-2002 Tom Christiansen and Nathan Torkington.
All rights reserved.
This documentation is free; you can redistribute it and/or modify it
under the same terms as Perl itself.
Irrespective of its distribution, all code examples in this file
are hereby placed into the public domain. You are permitted and
encouraged to use this code in your own programs for fun
or for profit as you see fit. A simple comment in the code giving
credit would be courteous but is not required.
|
