/*
* This file was produced by running the config_h.SH script, which
* gets its values from config.sh, which is generally produced by
* running Configure.
*
* Feel free to modify any of this as the need arises. Note, however,
* that running config_h.SH again will wipe out any changes you've made.
* For a more permanent change edit config.sh and rerun config_h.SH.
*
* \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
*/
/*
* Package name : perl5
* Source directory : /vos_ftp_site/pub/vos/posix/(alpha|ga)/perl
* Configuration time: 2002-02-15 20:16 UCT
* Configured by : Paul.Green@stratus.com
* Target system : VOS
*/
#ifndef _config_h_
#define _config_h_
/* LOC_SED:
* This symbol holds the complete pathname to the sed program.
*/
#define LOC_SED "/system/ported/command_library/sed.pm" /**/
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
* available.
*/
#define HAS_ALARM /**/
/* HASATTRIBUTE:
* This symbol indicates the C compiler can check for function attributes,
* such as printf formats. This is normally only supported by GNU cc.
*/
/*#define HASATTRIBUTE /**/
#ifndef HASATTRIBUTE
#define __attribute__(_arg_)
#endif
/* HAS_BCMP:
* This symbol is defined if the bcmp() routine is available to
* compare blocks of memory.
*/
/*#define HAS_BCMP /**/
/* HAS_BCOPY:
* This symbol is defined if the bcopy() routine is available to
* copy blocks of memory.
*/
/*#define HAS_BCOPY /**/
/* HAS_BZERO:
* This symbol is defined if the bzero() routine is available to
* set a memory block to 0.
*/
/*#define HAS_BZERO /**/
/* HAS_CHOWN:
* This symbol, if defined, indicates that the chown routine is
* available.
*/
/*#define HAS_CHOWN /**/
/* HAS_CHROOT:
* This symbol, if defined, indicates that the chroot routine is
* available.
*/
/*#define HAS_CHROOT /**/
/* HAS_CHSIZE:
* This symbol, if defined, indicates that the chsize routine is available
* to truncate files. You might need a -lx to get this routine.
*/
/*#define HAS_CHSIZE /**/
/* HASCONST:
* This symbol, if defined, indicates that this C compiler knows about
* the const type. There is no need to actually test for that symbol
* within your programs. The mere use of the "const" keyword will
* trigger the necessary tests.
*/
#define HASCONST /**/
#ifndef HASCONST
#define const
#endif
/* HAS_CUSERID:
* This symbol, if defined, indicates that the cuserid routine is
* available to get character login names.
*/
/*#define HAS_CUSERID /**/
/* HAS_DBL_DIG:
* This symbol, if defined, indicates that this system's <float.h>
* or <limits.h> defines the symbol DBL_DIG, which is the number
* of significant digits in a double precision number. If this
* symbol is not defined, a guess of 15 is usually pretty good.
*/
#define HAS_DBL_DIG /* */
/* HAS_DIFFTIME:
* This symbol, if defined, indicates that the difftime routine is
* available.
*/
#define HAS_DIFFTIME /**/
/* HAS_DLERROR:
* This symbol, if defined, indicates that the dlerror routine is
* available to return a string describing the last error that
* occurred from a call to dlopen(), dlclose() or dlsym().
*/
/*#define HAS_DLERROR /**/
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* available to duplicate file descriptors.
*/
/*#define HAS_DUP2 /**/
/* HAS_FCHMOD:
* This symbol, if defined, indicates that the fchmod routine is available
* to change mode of opened files. If unavailable, use chmod().
*/
#define HAS_FCHMOD /**/
/* HAS_FCHOWN:
* This symbol, if defined, indicates that the fchown routine is available
* to change ownership of opened files. If unavailable, use chown().
*/
/*#define HAS_FCHOWN /**/
/* HAS_FCNTL:
* This symbol, if defined, indicates to the C program that
* the fcntl() function exists.
*/
#define HAS_FCNTL /**/
/* HAS_FGETPOS:
* This symbol, if defined, indicates that the fgetpos routine is
* available to get the file position indicator, similar to ftell().
*/
#define HAS_FGETPOS /**/
/* HAS_FLOCK:
* This symbol, if defined, indicates that the flock routine is
* available to do file locking.
*/
/*#define HAS_FLOCK /**/
/* HAS_FORK:
* This symbol, if defined, indicates that the fork routine is
* available.
*/
/*#define HAS_FORK /**/
/* HAS_FSETPOS:
* This symbol, if defined, indicates that the fsetpos routine is
* available to set the file position indicator, similar to fseek().
*/
#define HAS_FSETPOS /**/
/* HAS_GETTIMEOFDAY:
* This symbol, if defined, indicates that the gettimeofday() system
* call is available for a sub-second accuracy clock. Usually, the file
* <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
* The type "Timeval" should be used to refer to "struct timeval".
*/
/*#define HAS_GETTIMEOFDAY /**/
#ifdef HAS_GETTIMEOFDAY
#define Timeval struct timeval /* Structure used by gettimeofday() */
#endif
/* HAS_GETGROUPS:
* This symbol, if defined, indicates that the getgroups() routine is
* available to get the list of process groups. If unavailable, multiple
* groups are probably not supported.
*/
/*#define HAS_GETGROUPS /**/
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
* available to get the login name.
*/
#define HAS_GETLOGIN /**/
/* HAS_GETPGID:
* This symbol, if defined, indicates to the C program that
* the getpgid(pid) function is available to get the
* process group id.
*/
/*#define HAS_GETPGID /**/
/* HAS_GETPGRP2:
* This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
* routine is available to get the current process group.
*/
/*#define HAS_GETPGRP2 /**/
/* HAS_GETPPID:
* This symbol, if defined, indicates that the getppid routine is
* available to get the parent process ID.
*/
#define HAS_GETPPID /**/
/* HAS_GETPRIORITY:
* This symbol, if defined, indicates that the getpriority routine is
* available to get a process's priority.
*/
/*#define HAS_GETPRIORITY /**/
/* HAS_INET_ATON:
* This symbol, if defined, indicates to the C program that the
* inet_aton() function is available to parse IP address "dotted-quad"
* strings.
*/
/*#define HAS_INET_ATON /**/
/* HAS_KILLPG:
* This symbol, if defined, indicates that the killpg routine is available
* to kill process groups. If unavailable, you probably should use kill
* with a negative process number.
*/
/*#define HAS_KILLPG /**/
/* HAS_LINK:
* This symbol, if defined, indicates that the link routine is
* available to create hard links.
*/
/*#define HAS_LINK /**/
/* HAS_LOCALECONV:
* This symbol, if defined, indicates that the localeconv routine is
* available for numeric and monetary formatting conventions.
*/
#define HAS_LOCALECONV /**/
/* HAS_LOCKF:
* This symbol, if defined, indicates that the lockf routine is
* available to do file locking.
*/
#define HAS_LOCKF /**/
/* HAS_LSTAT:
* This symbol, if defined, indicates that the lstat routine is
* available to do file stats on symbolic links.
*/
#define HAS_LSTAT /**/
/* HAS_MBLEN:
* This symbol, if defined, indicates that the mblen routine is available
* to find the number of bytes in a multibye character.
*/
#define HAS_MBLEN /**/
/* HAS_MBSTOWCS:
* This symbol, if defined, indicates that the mbstowcs routine is
* available to covert a multibyte string into a wide character string.
*/
#define HAS_MBSTOWCS /**/
/* HAS_MBTOWC:
* This symbol, if defined, indicates that the mbtowc routine is available
* to covert a multibyte to a wide character.
*/
#define HAS_MBTOWC /**/
/* HAS_MEMCMP:
* This symbol, if defined, indicates that the memcmp routine is available
* to compare blocks of memory.
*/
#define HAS_MEMCMP /**/
/* HAS_MEMCPY:
* This symbol, if defined, indicates that the memcpy routine is available
* to copy blocks of memory.
*/
#define HAS_MEMCPY /**/
/* HAS_MEMMOVE:
* This symbol, if defined, indicates that the memmove routine is available
* to copy potentially overlapping blocks of memory. This should be used
* only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
* own version.
*/
#define HAS_MEMMOVE /**/
/* HAS_MEMSET:
* This symbol, if defined, indicates that the memset routine is available
* to set blocks of memory.
*/
#define HAS_MEMSET /**/
/* HAS_MKDIR:
* This symbol, if defined, indicates that the mkdir routine is available
* to create directories. Otherwise you should fork off a new process to
* exec /bin/mkdir.
*/
#define HAS_MKDIR /**/
/* HAS_MKFIFO:
* This symbol, if defined, indicates that the mkfifo routine is
* available to create FIFOs. Otherwise, mknod should be able to
* do it for you. However, if mkfifo is there, mknod might require
* super-user privileges which mkfifo will not.
*/
#define HAS_MKFIFO /**/
/* HAS_MKTIME:
* This symbol, if defined, indicates that the mktime routine is
* available.
*/
#define HAS_MKTIME /**/
/* HAS_MSYNC:
* This symbol, if defined, indicates that the msync system call is
* available to synchronize a mapped file.
*/
/*#define HAS_MSYNC /**/
/* HAS_MUNMAP:
* This symbol, if defined, indicates that the munmap system call is
* available to unmap a region, usually mapped by mmap().
*/
/*#define HAS_MUNMAP /**/
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
* available.
*/
/*#define HAS_NICE /**/
/* HAS_PATHCONF:
* This symbol, if defined, indicates that pathconf() is available
* to determine file-system related limits and options associated
* with a given filename.
*/
/* HAS_FPATHCONF:
* This symbol, if defined, indicates that pathconf() is available
* to determine file-system related limits and options associated
* with a given open file descriptor.
*/
#define HAS_PATHCONF /**/
#define HAS_FPATHCONF /**/
/* HAS_PAUSE:
* This symbol, if defined, indicates that the pause routine is
* available to suspend a process until a signal is received.
*/
#define HAS_PAUSE /**/
/* HAS_PIPE:
* This symbol, if defined, indicates that the pipe routine is
* available to create an inter-process channel.
*/
#define HAS_PIPE /**/
/* HAS_POLL:
* This symbol, if defined, indicates that the poll routine is
* available to poll active file descriptors. You may safely
* include <poll.h> when this symbol is defined.
*/
#define HAS_POLL /**/
/* HAS_READDIR:
* This symbol, if defined, indicates that the readdir routine is
* available to read directory entries. You may have to include
* <dirent.h>. See I_DIRENT.
*/
#define HAS_READDIR /**/
/* HAS_SEEKDIR:
* This symbol, if defined, indicates that the seekdir routine is
* available. You may have to include <dirent.h>. See I_DIRENT.
*/
/*#define HAS_SEEKDIR /**/
/* HAS_TELLDIR:
* This symbol, if defined, indicates that the telldir routine is
* available. You may have to include <dirent.h>. See I_DIRENT.
*/
/*#define HAS_TELLDIR /**/
/* HAS_REWINDDIR:
* This symbol, if defined, indicates that the rewinddir routine is
* available. You may have to include <dirent.h>. See I_DIRENT.
*/
#define HAS_REWINDDIR /**/
/* HAS_READLINK:
* This symbol, if defined, indicates that the readlink routine is
* available to read the value of a symbolic link.
*/
#define HAS_READLINK /**/
/* HAS_RENAME:
* This symbol, if defined, indicates that the rename routine is available
* to rename files. Otherwise you should do the unlink(), link(), unlink()
* trick.
*/
#define HAS_RENAME /**/
/* HAS_RMDIR:
* This symbol, if defined, indicates that the rmdir routine is
* available to remove directories. Otherwise you should fork off a
* new process to exec /bin/rmdir.
*/
#define HAS_RMDIR /**/
/* HAS_SELECT:
* This symbol, if defined, indicates that the select routine is
* available to select active file descriptors. If the timeout field
* is used, <sys/time.h> may need to be included.
*/
#define HAS_SELECT /**/
/* HAS_SETEGID:
* This symbol, if defined, indicates that the setegid routine is available
* to change the effective gid of the current program.
*/
/*#define HAS_SETEGID /**/
/* HAS_SETEUID:
* This symbol, if defined, indicates that the seteuid routine is available
* to change the effective uid of the current program.
*/
/*#define HAS_SETEUID /**/
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
* to a line-buffered mode.
*/
/*#define HAS_SETLINEBUF /**/
/* HAS_SETLOCALE:
* This symbol, if defined, indicates that the setlocale routine is
* available to handle locale-specific ctype implementations.
*/
#define HAS_SETLOCALE /**/
/* HAS_SETPGID:
* This symbol, if defined, indicates that the setpgid(pid, gpid)
* routine is available to set process group ID.
*/
/*#define HAS_SETPGID /**/
/* HAS_SETPGRP2:
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* routine is available to set the current process group.
*/
/*#define HAS_SETPGRP2 /**/
/* HAS_SETPRIORITY:
* This symbol, if defined, indicates that the setpriority routine is
* available to set a process's priority.
*/
/*#define HAS_SETPRIORITY /**/
/* HAS_SETREGID:
* This symbol, if defined, indicates that the setregid routine is
* available to change the real and effective gid of the current
* process.
*/
/* HAS_SETRESGID:
* This symbol, if defined, indicates that the setresgid routine is
* available to change the real, effective and saved gid of the current
* process.
*/
/*#define HAS_SETREGID /**/
/*#define HAS_SETRESGID /**/
/* HAS_SETREUID:
* This symbol, if defined, indicates that the setreuid routine is
* available to change the real and effective uid of the current
* process.
*/
/* HAS_SETRESUID:
* This symbol, if defined, indicates that the setresuid routine is
* available to change the real, effective and saved uid of the current
* process.
*/
/*#define HAS_SETREUID /**/
/*#define HAS_SETRESUID /**/
/* HAS_SETRGID:
* This symbol, if defined, indicates that the setrgid routine is available
* to change the real gid of the current program.
*/
/*#define HAS_SETRGID /**/
/* HAS_SETRUID:
* This symbol, if defined, indicates that the setruid routine is available
* to change the real uid of the current program.
*/
/*#define HAS_SETRUID /**/
/* HAS_SETSID:
* This symbol, if defined, indicates that the setsid routine is
* available to set the process group ID.
*/
/*#define HAS_SETSID /**/
/* HAS_STRCHR:
* This symbol is defined to indicate that the strchr()/strrchr()
* functions are available for string searching. If not, try the
* index()/rindex() pair.
*/
/* HAS_INDEX:
* This symbol is defined to indicate that the index()/rindex()
* functions are available for string searching.
*/
#define HAS_STRCHR /**/
/*#define HAS_INDEX /**/
/* HAS_STRCOLL:
* This symbol, if defined, indicates that the strcoll routine is
* available to compare strings using collating information.
*/
#define HAS_STRCOLL /**/
/* USE_STRUCT_COPY:
* This symbol, if defined, indicates that this C compiler knows how
* to copy structures. If undefined, you'll need to use a block copy
* routine of some sort instead.
*/
#define USE_STRUCT_COPY /**/
/* HAS_STRTOD:
* This symbol, if defined, indicates that the strtod routine is
* available to provide better numeric string conversion than atof().
*/
#define HAS_STRTOD /**/
/* HAS_STRTOL:
* This symbol, if defined, indicates that the strtol routine is available
* to provide better numeric string conversion than atoi() and friends.
*/
#define HAS_STRTOL /**/
/* HAS_STRXFRM:
* This symbol, if defined, indicates that the strxfrm() routine is
* available to transform strings.
*/
#define HAS_STRXFRM /**/
/* HAS_SYMLINK:
* This symbol, if defined, indicates that the symlink routine is available
* to create symbolic links.
*/
#define HAS_SYMLINK /**/
/* HAS_SYSCALL:
* This symbol, if defined, indicates that the syscall routine is
* available to call arbitrary system calls. If undefined, that's tough.
*/
/*#define HAS_SYSCALL /**/
/* HAS_SYSCONF:
* This symbol, if defined, indicates that sysconf() is available
* to determine system related limits and options.
*/
#define HAS_SYSCONF /**/
/* HAS_SYSTEM:
* This symbol, if defined, indicates that the system routine is
* available to issue a shell command.
*/
#define HAS_SYSTEM /**/
/* HAS_TCGETPGRP:
* This symbol, if defined, indicates that the tcgetpgrp routine is
* available to get foreground process group ID.
*/
/*#define HAS_TCGETPGRP /**/
/* HAS_TCSETPGRP:
* This symbol, if defined, indicates that the tcsetpgrp routine is
* available to set foreground process group ID.
*/
/*#define HAS_TCSETPGRP /**/
/* HAS_TRUNCATE:
* This symbol, if defined, indicates that the truncate routine is
* available to truncate files.
*/
/*#define HAS_TRUNCATE /**/
/* HAS_TZNAME:
* This symbol, if defined, indicates that the tzname[] array is
* available to access timezone names.
*/
#define HAS_TZNAME /**/
/* HAS_UMASK:
* This symbol, if defined, indicates that the umask routine is
* available to set and get the value of the file creation mask.
*/
#define HAS_UMASK /**/
/* HAS_USLEEP:
* This symbol, if defined, indicates that the usleep routine is
* available to let the process sleep on a sub-second accuracy.
*/
/*#define HAS_USLEEP /**/
/* HASVOLATILE:
* This symbol, if defined, indicates that this C compiler knows about
* the volatile declaration.
*/
#define HASVOLATILE /**/
#ifndef HASVOLATILE
#define volatile
#endif
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
/*#define HAS_WAIT4 /**/
/* HAS_WAITPID:
* This symbol, if defined, indicates that the waitpid routine is
* available to wait for child process.
*/
#define HAS_WAITPID /**/
/* HAS_WCSTOMBS:
* This symbol, if defined, indicates that the wcstombs routine is
* available to convert wide character strings to multibyte strings.
*/
#define HAS_WCSTOMBS /**/
/* HAS_WCTOMB:
* This symbol, if defined, indicates that the wctomb routine is available
* to covert a wide character to a multibyte.
*/
#define HAS_WCTOMB /**/
/* I_ARPA_INET:
* This symbol, if defined, indicates to the C program that it should
* include <arpa/inet.h> to get inet_addr and friends declarations.
*/
#define I_ARPA_INET /**/
/* I_DBM:
* This symbol, if defined, indicates that <dbm.h> exists and should
* be included.
*/
/* I_RPCSVC_DBM:
* This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
* should be included.
*/
/*#define I_DBM /**/
/*#define I_RPCSVC_DBM /**/
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* include <dirent.h>. Using this symbol also triggers the definition
* of the Direntry_t define which ends up being 'struct dirent' or
* 'struct direct' depending on the availability of <dirent.h>.
*/
/* DIRNAMLEN:
* This symbol, if defined, indicates to the C program that the length
* of directory entry names is provided by a d_namlen field. Otherwise
* you need to do strlen() on the d_name field.
*/
/* Direntry_t:
* This symbol is set to 'struct direct' or 'struct dirent' depending on
* whether dirent is available or not. You should use this pseudo type to
* portably declare your directory entries.
*/
#define I_DIRENT /**/
/*#define DIRNAMLEN /**/
#define Direntry_t struct dirent
/* I_DLFCN:
* This symbol, if defined, indicates that <dlfcn.h> exists and should
* be included.
*/
/*#define I_DLFCN /**/
/* I_FCNTL:
* This manifest constant tells the C program to include <fcntl.h>.
*/
#define I_FCNTL /**/
/* I_FLOAT:
* This symbol, if defined, indicates to the C program that it should
* include <float.h> to get definition of symbols like DBL_MAX or
* DBL_MIN, i.e. machine dependent floating point values.
*/
#define I_FLOAT /**/
/* I_LIMITS:
* This symbol, if defined, indicates to the C program that it should
* include <limits.h> to get definition of symbols like WORD_BIT or
* LONG_MAX, i.e. machine dependant limitations.
*/
#define I_LIMITS /**/
/* I_LOCALE:
* This symbol, if defined, indicates to the C program that it should
* include <locale.h>.
*/
#define I_LOCALE /**/
/* I_MATH:
* This symbol, if defined, indicates to the C program that it should
* include <math.h>.
*/
#define I_MATH /**/
/* I_MEMORY:
* This symbol, if defined, indicates to the C program that it should
* include <memory.h>.
*/
/*#define I_MEMORY /**/
/* I_NET_ERRNO:
* This symbol, if defined, indicates that <net/errno.h> exists and
* should be included.
*/
/*#define I_NET_ERRNO /**/
/* I_NETINET_IN:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
*/
#define I_NETINET_IN /**/
/* I_SFIO:
* This symbol, if defined, indicates to the C program that it should
* include <sfio.h>.
*/
/*#define I_SFIO /**/
/* I_STDDEF:
* This symbol, if defined, indicates that <stddef.h> exists and should
* be included.
*/
#define I_STDDEF /**/
/* I_STDLIB:
* This symbol, if defined, indicates that <stdlib.h> exists and should
* be included.
*/
#define I_STDLIB /**/
/* I_STRING:
* This symbol, if defined, indicates to the C program that it should
* include <string.h> (USG systems) instead of <strings.h> (BSD systems).
*/
#define I_STRING /**/
/* I_SYS_DIR:
* This symbol, if defined, indicates to the C program that it should
* include <sys/dir.h>.
*/
/*#define I_SYS_DIR /**/
/* I_SYS_FILE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/file.h> to get definition of R_OK and friends.
*/
/*#define I_SYS_FILE /**/
/* I_SYS_IOCTL:
* This symbol, if defined, indicates that <sys/ioctl.h> exists and should
* be included. Otherwise, include <sgtty.h> or <termio.h>.
*/
/* I_SYS_SOCKIO:
* This symbol, if defined, indicates the <sys/sockio.h> should be included
* to get socket ioctl options, like SIOCATMARK.
*/
#define I_SYS_IOCTL /**/
/*#define I_SYS_SOCKIO /**/
/* I_SYS_NDIR:
* This symbol, if defined, indicates to the C program that it should
* include <sys/ndir.h>.
*/
/*#define I_SYS_NDIR /**/
/* I_SYS_PARAM:
* This symbol, if defined, indicates to the C program that it should
* include <sys/param.h>.
*/
/*#define I_SYS_PARAM /**/
/* I_SYS_RESOURCE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/resource.h>.
*/
/*#define I_SYS_RESOURCE /**/
/* I_SYS_SELECT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/select.h> in order to get definition of struct timeval.
*/
#define I_SYS_SELECT /**/
/* I_SYS_STAT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/stat.h>.
*/
#define I_SYS_STAT /**/
/* I_SYS_TIMES:
* This symbol, if defined, indicates to the C program that it should
* include <sys/times.h>.
*/
#define I_SYS_TIMES /**/
/* I_SYS_TYPES:
* This symbol, if defined, indicates to the C program that it should
* include <sys/types.h>.
*/
#define I_SYS_TYPES /**/
/* I_SYS_UN:
* This symbol, if defined, indicates to the C program that it should
* include <sys/un.h> to get UNIX domain socket definitions.
*/
/*#define I_SYS_UN /**/
/* I_SYS_WAIT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/wait.h>.
*/
#define I_SYS_WAIT /**/
/* I_TERMIO:
* This symbol, if defined, indicates that the program should include
* <termio.h> rather than <sgtty.h>. There are also differences in
* the ioctl() calls that depend on the value of this symbol.
*/
/* I_TERMIOS:
* This symbol, if defined, indicates that the program should include
* the POSIX termios.h rather than sgtty.h or termio.h.
* There are also differences in the ioctl() calls that depend on the
* value of this symbol.
*/
/* I_SGTTY:
* This symbol, if defined, indicates that the program should include
* <sgtty.h> rather than <termio.h>. There are also differences in
* the ioctl() calls that depend on the value of this symbol.
*/
/*#define I_TERMIO /**/
#define I_TERMIOS /**/
/*#define I_SGTTY /**/
/* I_UNISTD:
* This symbol, if defined, indicates to the C program that it should
* include <unistd.h>.
*/
#define I_UNISTD /**/
/* I_UTIME:
* This symbol, if defined, indicates to the C program that it should
* include <utime.h>.
*/
#define I_UTIME /**/
/* I_VALUES:
* This symbol, if defined, indicates to the C program that it should
* include <values.h> to get definition of symbols like MINFLOAT or
* MAXLONG, i.e. machine dependant limitations. Probably, you
* should use <limits.h> instead, if it is available.
*/
#define I_VALUES /**/
/* I_VFORK:
* This symbol, if defined, indicates to the C program that it should
* include vfork.h.
*/
/*#define I_VFORK /**/
/* INTSIZE:
* This symbol contains the value of sizeof(int) so that the C
* preprocessor can make decisions based on it.
*/
/* LONGSIZE:
* This symbol contains the value of sizeof(long) so that the C
* preprocessor can make decisions based on it.
*/
/* SHORTSIZE:
* This symbol contains the value of sizeof(short) so that the C
* preprocessor can make decisions based on it.
*/
#define INTSIZE 4 /**/
#define LONGSIZE 4 /**/
#define SHORTSIZE 2 /**/
/* MULTIARCH:
* This symbol, if defined, signifies that the build
* process will produce some binary files that are going to be
* used in a cross-platform environment. This is the case for
* example with the NeXT "fat" binaries that contain executables
* for several CPUs.
*/
/*#define MULTIARCH /**/
/* HAS_QUAD:
* This symbol, if defined, tells that there's a 64-bit integer type,
* Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
* of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
*/
/*#define HAS_QUAD /**/
#ifdef HAS_QUAD
# define Quad_t _error_ /**/
# define Uquad_t _error_ /**/
# define QUADKIND _error_ /**/
# define QUAD_IS_INT 1
# define QUAD_IS_LONG 2
# define QUAD_IS_LONG_LONG 3
# define QUAD_IS_INT64_T 4
#endif
/* HAS_ACCESSX:
* This symbol, if defined, indicates that the accessx routine is
* available to do extended access checks.
*/
/*#define HAS_ACCESSX /**/
/* HAS_EACCESS:
* This symbol, if defined, indicates that the eaccess routine is
* available to do extended access checks.
*/
/*#define HAS_EACCESS /**/
/* I_SYS_ACCESS:
* This symbol, if defined, indicates to the C program that it should
* include <sys/access.h>.
*/
/*#define I_SYS_ACCESS /**/
/* I_SYS_SECURITY:
* This symbol, if defined, indicates to the C program that it should
* include <sys/security.h>.
*/
/*#define I_SYS_SECURITY /**/
/* OSNAME:
* This symbol contains the name of the operating system, as determined
* by Configure. You shouldn't rely on it too much; the specific
* feature tests from Configure are generally more reliable.
*/
/* OSVERS:
* This symbol contains the version of the operating system, as determined
* by Configure. You shouldn't rely on it too much; the specific
* feature tests from Configure are generally more reliable.
*/
#define OSNAME "VOS" /**/
#define OSVERS "VOS" /**/
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* double, or a long double when applicable. Usual values are 2,
* 4 and 8. The default is eight, for safety.
*/
#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
# define MEM_ALIGNBYTES 8
#else
#define MEM_ALIGNBYTES 8
#endif
/* ARCHLIB:
* This variable, if defined, holds the name of the directory in
* which the user wants to put architecture-dependent public
* library files for perl5. It is most often a local directory
* such as /usr/local/lib. Programs using this variable must be
* prepared to deal with filename expansion. If ARCHLIB is the
* same as PRIVLIB, it is not defined, since presumably the
* program already searches PRIVLIB.
*/
/* ARCHLIB_EXP:
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
/*#define ARCHLIB "" /**/
/*#define ARCHLIB_EXP "" /**/
/* ARCHNAME:
* This symbol holds a string representing the architecture name.
* It may be used to construct an architecture-dependant pathname
* where library files may be held under a private library, for
* instance.
*/
#define ARCHNAME "" /**/
/* HAS_ATOLF:
* This symbol, if defined, indicates that the atolf routine is
* available to convert strings into long doubles.
*/
/*#define HAS_ATOLF /**/
/* HAS_ATOLL:
* This symbol, if defined, indicates that the atoll routine is
* available to convert strings into long longs.
*/
/*#define HAS_ATOLL /**/
/* BIN:
* This symbol holds the path of the bin directory where the package will
* be installed. Program must be prepared to deal with ~name substitution.
*/
/* BIN_EXP:
* This symbol is the filename expanded version of the BIN symbol, for
* programs that do not want to deal with that at run-time.
*/
#define BIN "/system/ported/command_library" /**/
#define BIN_EXP "/system/ported/command_library" /**/
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
* If the compiler supports cross-compiling or multiple-architecture
* binaries (eg. on NeXT systems), use compiler-defined macros to
* determine the byte order.
* On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
* Binaries (MAB) on either big endian or little endian machines.
* The endian-ness is available at compile-time. This only matters
* for perl, where the config.h can be generated and installed on
* one system, and used by a different architecture to build an
* extension. Older versions of NeXT that might not have
* defined either *_ENDIAN__ were all on Motorola 680x0 series,
* so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
# ifdef __LITTLE_ENDIAN__
# if LONGSIZE == 4
# define BYTEORDER 0x1234
# else
# if LONGSIZE == 8
# define BYTEORDER 0x12345678
# endif
# endif
# else
# ifdef __BIG_ENDIAN__
# if LONGSIZE == 4
# define BYTEORDER 0x4321
# else
# if LONGSIZE == 8
# define BYTEORDER 0x87654321
# endif
# endif
# endif
# endif
# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
# define BYTEORDER 0x4321
# endif
#else
#define BYTEORDER 0x4321 /* large digits for MSB */
#endif /* NeXT */
/* CAT2:
* This macro catenates 2 tokens together.
*/
/* STRINGIFY:
* This macro surrounds its token with double quotes.
*/
#if 42 == 1
#define CAT2(a,b) a/**/b
#define STRINGIFY(a) "a"
/* If you can get stringification with catify, tell me how! */
#endif
#if 42 == 42
#define PeRl_CaTiFy(a, b) a ## b
#define PeRl_StGiFy(a) #a
/* the additional level of indirection enables these macros to be
* used as arguments to other macros. See K&R 2nd ed., page 231. */
#define CAT2(a,b) PeRl_CaTiFy(a,b)
#define StGiFy(a) PeRl_StGiFy(a)
#define STRINGIFY(a) PeRl_StGiFy(a)
#endif
#if 42 != 1 && 42 != 42
# include "Bletch: How does this C preprocessor catenate tokens?"
#endif
/* CPPSTDIN:
* This symbol contains the first part of the string which will invoke
* the C preprocessor on the standard input and produce to standard
* output. Typical value of "cc -E" or "/lib/cpp", but it can also
* call a wrapper. See CPPRUN.
*/
/* CPPMINUS:
* This symbol contains the second part of the string which will invoke
* the C preprocessor on the standard input and produce to standard
* output. This symbol will have the value "-" if CPPSTDIN needs a minus
* to specify standard input, otherwise the value is "".
*/
/* CPPRUN:
* This symbol contains the string which will invoke a C preprocessor on
* the standard input and produce to standard output. It needs to end
* with CPPLAST, after all other preprocessor flags have been specified.
* The main difference with CPPSTDIN is that this program will never be a
* pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
* available directly to the user. Note that it may well be different from
* the preprocessor used to compile the C program.
*/
/* CPPLAST:
* This symbol is intended to be used along with CPPRUN in the same manner
* symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
*/
#define CPPSTDIN "cc -E"
#define CPPMINUS "-"
#define CPPRUN "cc -E -"
#define CPPLAST "-"
/* HAS__FWALK:
* This symbol, if defined, indicates that the _fwalk system call is
* available to apply a function to all the file handles.
*/
/*#define HAS__FWALK /**/
/* HAS_ACCESS:
* This manifest constant lets the C program know that the access()
* system call is available to check for accessibility using real UID/GID.
* (always present on UNIX.)
*/
/*#define HAS_ACCESS /**/
/* HAS_ASCTIME_R:
* This symbol, if defined, indicates that the asctime_r routine
* is available to asctime re-entrantly.
*/
/* ASCTIME_R_PROTO:
* This symbol encodes the prototype of asctime_r.
* It is zero if d_asctime_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r
* is defined.
*/
/*#define HAS_ASCTIME_R /**/
#define ASCTIME_R_PROTO 0 /**/
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
/*#define CASTI32 /**/
/* CASTNEGFLOAT:
* This symbol is defined if the C compiler can cast negative
* numbers to unsigned longs, ints and shorts.
*/
/* CASTFLAGS:
* This symbol contains flags that say what difficulties the compiler
* has casting odd floating values to unsigned long:
* 0 = ok
* 1 = couldn't cast < 0
* 2 = couldn't cast >= 0x80000000
* 4 = couldn't cast in argument expression list
*/
#define CASTNEGFLOAT /**/
#define CASTFLAGS 0 /**/
/* HAS_CLASS:
* This symbol, if defined, indicates that the class routine is
* available to classify doubles. Available for example in AIX.
* The returned values are defined in <float.h> and are:
*
* FP_PLUS_NORM Positive normalized, nonzero
* FP_MINUS_NORM Negative normalized, nonzero
* FP_PLUS_DENORM Positive denormalized, nonzero
* FP_MINUS_DENORM Negative denormalized, nonzero
* FP_PLUS_ZERO +0.0
* FP_MINUS_ZERO -0.0
* FP_PLUS_INF +INF
* FP_MINUS_INF -INF
* FP_NANS Signaling Not a Number (NaNS)
* FP_NANQ Quiet Not a Number (NaNQ)
*/
/*#define HAS_CLASS /**/
/* VOID_CLOSEDIR:
* This symbol, if defined, indicates that the closedir() routine
* does not return a value.
*/
/*#define VOID_CLOSEDIR /**/
/* HAS_STRUCT_CMSGHDR:
* This symbol, if defined, indicates that the struct cmsghdr
* is supported.
*/
/*#define HAS_STRUCT_CMSGHDR /**/
/* HAS_CRYPT_R:
* This symbol, if defined, indicates that the crypt_r routine
* is available to crypt re-entrantly.
*/
/* CRYPT_R_PROTO:
* This symbol encodes the prototype of crypt_r.
* It is zero if d_crypt_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r
* is defined.
*/
/*#define HAS_CRYPT_R /**/
#define CRYPT_R_PROTO 0 /**/
/* HAS_CSH:
* This symbol, if defined, indicates that the C-shell exists.
*/
/* CSH:
* This symbol, if defined, contains the full pathname of csh.
*/
/*#define HAS_CSH /**/
#ifdef HAS_CSH
#define CSH "" /**/
#endif
/* HAS_CTIME_R:
* This symbol, if defined, indicates that the ctime_r routine
* is available to ctime re-entrantly.
*/
/* CTIME_R_PROTO:
* This symbol encodes the prototype of ctime_r.
* It is zero if d_ctime_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r
* is defined.
*/
/*#define HAS_CTIME_R /**/
#define CTIME_R_PROTO 0 /**/
/* DLSYM_NEEDS_UNDERSCORE:
* This symbol, if defined, indicates that we need to prepend an
* underscore to the symbol name before calling dlsym(). This only
* makes sense if you *have* dlsym, which we will presume is the
* case if you're using dl_dlopen.xs.
*/
/*#define DLSYM_NEEDS_UNDERSCORE /**/
/* HAS_DRAND48_R:
* This symbol, if defined, indicates that the drand48_r routine
* is available to drand48 re-entrantly.
*/
/* DRAND48_R_PROTO:
* This symbol encodes the prototype of drand48_r.
* It is zero if d_drand48_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r
* is defined.
*/
/*#define HAS_DRAND48_R /**/
#define DRAND48_R_PROTO 0 /**/
/* HAS_DRAND48_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the drand48() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern double drand48(void);
*/
/*#define HAS_DRAND48_PROTO /**/
/* HAS_ENDGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for finalizing sequential access of the group database.
*/
/*#define HAS_ENDGRENT /**/
/* HAS_ENDGRENT_R:
* This symbol, if defined, indicates that the endgrent_r routine
* is available to endgrent re-entrantly.
*/
/* ENDGRENT_R_PROTO:
* This symbol encodes the prototype of endgrent_r.
* It is zero if d_endgrent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r
* is defined.
*/
/*#define HAS_ENDGRENT_R /**/
#define ENDGRENT_R_PROTO 0 /**/
/* HAS_ENDHOSTENT:
* This symbol, if defined, indicates that the endhostent() routine is
* available to close whatever was being used for host queries.
*/
#define HAS_ENDHOSTENT /**/
/* HAS_ENDNETENT:
* This symbol, if defined, indicates that the endnetent() routine is
* available to close whatever was being used for network queries.
*/
#define HAS_ENDNETENT /**/
/* HAS_ENDPROTOENT:
* This symbol, if defined, indicates that the endprotoent() routine is
* available to close whatever was being used for protocol queries.
*/
#define HAS_ENDPROTOENT /**/
/* HAS_ENDPWENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for finalizing sequential access of the passwd database.
*/
/*#define HAS_ENDPWENT /**/
/* HAS_ENDPWENT_R:
* This symbol, if defined, indicates that the endpwent_r routine
* is available to endpwent re-entrantly.
*/
/* ENDPWENT_R_PROTO:
* This symbol encodes the prototype of endpwent_r.
* It is zero if d_endpwent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r
* is defined.
*/
/*#define HAS_ENDPWENT_R /**/
#define ENDPWENT_R_PROTO 0 /**/
/* HAS_ENDSERVENT:
* This symbol, if defined, indicates that the endservent() routine is
* available to close whatever was being used for service queries.
*/
#define HAS_ENDSERVENT /**/
/* HAS_FCHDIR:
* This symbol, if defined, indicates that the fchdir routine is
* available to change directory using a file descriptor.
*/
/*#define HAS_FCHDIR /**/
/* FCNTL_CAN_LOCK:
* This symbol, if defined, indicates that fcntl() can be used
* for file locking. Normally on Unix systems this is defined.
* It may be undefined on VMS.
*/
#define FCNTL_CAN_LOCK /**/
/* HAS_FD_SET:
* This symbol, when defined, indicates presence of the fd_set typedef
* in <sys/types.h>
*/
#define HAS_FD_SET /**/
/* HAS_FINITE:
* This symbol, if defined, indicates that the finite routine is
* available to check whether a double is finite (non-infinity non-NaN).
*/
/*#define HAS_FINITE /**/
/* HAS_FINITEL:
* This symbol, if defined, indicates that the finitel routine is
* available to check whether a long double is finite
* (non-infinity non-NaN).
*/
/*#define HAS_FINITEL /**/
/* FLEXFILENAMES:
* This symbol, if defined, indicates that the system supports filenames
* longer than 14 characters.
*/
#define FLEXFILENAMES /**/
/* HAS_FP_CLASS:
* This symbol, if defined, indicates that the fp_class routine is
* available to classify doubles. Available for example in Digital UNIX.
* The returned values are defined in <math.h> and are:
*
* FP_SNAN Signaling NaN (Not-a-Number)
* FP_QNAN Quiet NaN (Not-a-Number)
* FP_POS_INF +infinity
* FP_NEG_INF -infinity
* FP_POS_NORM Positive normalized
* FP_NEG_NORM Negative normalized
* FP_POS_DENORM Positive denormalized
* FP_NEG_DENORM Negative denormalized
* FP_POS_ZERO +0.0 (positive zero)
* FP_NEG_ZERO -0.0 (negative zero)
*/
/*#define HAS_FP_CLASS /**/
/* HAS_FPCLASS:
* This symbol, if defined, indicates that the fpclass routine is
* available to classify doubles. Available for example in Solaris/SVR4.
* The returned values are defined in <ieeefp.h> and are:
*
* FP_SNAN signaling NaN
* FP_QNAN quiet NaN
* FP_NINF negative infinity
* FP_PINF positive infinity
* FP_NDENORM negative denormalized non-zero
* FP_PDENORM positive denormalized non-zero
* FP_NZERO negative zero
* FP_PZERO positive zero
* FP_NNORM negative normalized non-zero
* FP_PNORM positive normalized non-zero
*/
/*#define HAS_FPCLASS /**/
/* HAS_FPCLASSIFY:
* This symbol, if defined, indicates that the fpclassify routine is
* available to classify doubles. Available for example in HP-UX.
* The returned values are defined in <math.h> and are
*
* FP_NORMAL Normalized
* FP_ZERO Zero
* FP_INFINITE Infinity
* FP_SUBNORMAL Denormalized
* FP_NAN NaN
*
*/
/*#define HAS_FPCLASSIFY /**/
/* HAS_FPOS64_T:
* This symbol will be defined if the C compiler supports fpos64_t.
*/
/*#define HAS_FPOS64_T /**/
/* HAS_FREXPL:
* This symbol, if defined, indicates that the frexpl routine is
* available to break a long double floating-point number into
* a normalized fraction and an integral power of 2.
*/
/*#define HAS_FREXPL /**/
/* HAS_STRUCT_FS_DATA:
* This symbol, if defined, indicates that the struct fs_data
* to do statfs() is supported.
*/
/*#define HAS_STRUCT_FS_DATA /**/
/* HAS_FSEEKO:
* This symbol, if defined, indicates that the fseeko routine is
* available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
/*#define HAS_FSEEKO /**/
/* HAS_FSTATFS:
* This symbol, if defined, indicates that the fstatfs routine is
* available to stat filesystems by file descriptors.
*/
/*#define HAS_FSTATFS /**/
/* HAS_FSYNC:
* This symbol, if defined, indicates that the fsync routine is
* available to write a file's modified data and attributes to
* permanent storage.
*/
/*#define HAS_FSYNC /**/
/* HAS_FTELLO:
* This symbol, if defined, indicates that the ftello routine is
* available to ftell beyond 32 bits (useful for ILP32 hosts).
*/
/*#define HAS_FTELLO /**/
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
* emulates the behavior of sprintf("%g"), but is sometimes much more
* efficient. If gconvert() is not available, but gcvt() drops the
* trailing decimal point, then gcvt() is used. If all else fails,
* a macro using sprintf("%g") is used. Arguments for the Gconvert
* macro are: value, number of digits, whether trailing zeros should
* be retained, and the output buffer.
* The usual values are:
* d_Gconvert='gconvert((x),(n),(t),(b))'
* d_Gconvert='gcvt((x),(n),(b))'
* d_Gconvert='sprintf((b),"%.*g",(n),(x))'
* The last two assume trailing zeros should not be kept.
*/
#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
/* HAS_GETCWD:
* This symbol, if defined, indicates that the getcwd routine is
* available to get the current working directory.
*/
#define HAS_GETCWD /**/
/* HAS_GETESPWNAM:
* This symbol, if defined, indicates that the getespwnam system call is
* available to retrieve enchanced (shadow) password entries by name.
*/
/*#define HAS_GETESPWNAM /**/
/* HAS_GETFSSTAT:
* This symbol, if defined, indicates that the getfsstat routine is
* available to stat filesystems in bulk.
*/
/*#define HAS_GETFSSTAT /**/
/* HAS_GETGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for sequential access of the group database.
*/
/*#define HAS_GETGRENT /**/
/* HAS_GETGRENT_R:
* This symbol, if defined, indicates that the getgrent_r routine
* is available to getgrent re-entrantly.
*/
/* GETGRENT_R_PROTO:
* This symbol encodes the prototype of getgrent_r.
* It is zero if d_getgrent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
* is defined.
*/
/*#define HAS_GETGRENT_R /**/
#define GETGRENT_R_PROTO 0 /**/
/* HAS_GETGRGID_R:
* This symbol, if defined, indicates that the getgrgid_r routine
* is available to getgrgid re-entrantly.
*/
/* GETGRGID_R_PROTO:
* This symbol encodes the prototype of getgrgid_r.
* It is zero if d_getgrgid_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
* is defined.
*/
/*#define HAS_GETGRGID_R /**/
#define GETGRGID_R_PROTO 0 /**/
/* HAS_GETGRNAM_R:
* This symbol, if defined, indicates that the getgrnam_r routine
* is available to getgrnam re-entrantly.
*/
/* GETGRNAM_R_PROTO:
* This symbol encodes the prototype of getgrnam_r.
* It is zero if d_getgrnam_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
* is defined.
*/
/*#define HAS_GETGRNAM_R /**/
#define GETGRNAM_R_PROTO 0 /**/
/* HAS_GETHOSTBYADDR:
* This symbol, if defined, indicates that the gethostbyaddr() routine is
* available to look up hosts by their IP addresses.
*/
#define HAS_GETHOSTBYADDR /**/
/* HAS_GETHOSTBYNAME:
* This symbol, if defined, indicates that the gethostbyname() routine is
* available to look up host names in some data base or other.
*/
#define HAS_GETHOSTBYNAME /**/
/* HAS_GETHOSTENT:
* This symbol, if defined, indicates that the gethostent() routine is
* available to look up host names in some data base or another.
*/
#define HAS_GETHOSTENT /**/
/* HAS_GETHOSTNAME:
* This symbol, if defined, indicates that the C program may use the
* gethostname() routine to derive the host name. See also HAS_UNAME
* and PHOSTNAME.
*/
/* HAS_UNAME:
* This symbol, if defined, indicates that the C program may use the
* uname() routine to derive the host name. See also HAS_GETHOSTNAME
* and PHOSTNAME.
*/
/* PHOSTNAME:
* This symbol, if defined, indicates the command to feed to the
* popen() routine to derive the host name. See also HAS_GETHOSTNAME
* and HAS_UNAME. Note that the command uses a fully qualified path,
* so that it is safe even if used by a process with super-user
* privileges.
*/
/* HAS_PHOSTNAME:
* This symbol, if defined, indicates that the C program may use the
* contents of PHOSTNAME as a command to feed to the popen() routine
* to derive the host name.
*/
#define HAS_GETHOSTNAME /**/
#define HAS_UNAME /**/
/*#define HAS_PHOSTNAME /**/
#ifdef HAS_PHOSTNAME
#define PHOSTNAME "" /* How to get the host name */
#endif
/* HAS_GETHOST_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for gethostent(), gethostbyname(), and
* gethostbyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
#define HAS_GETHOST_PROTOS /**/
/* HAS_GETITIMER:
* This symbol, if defined, indicates that the getitimer routine is
* available to return interval timers.
*/
/*#define HAS_GETITIMER /**/
/* HAS_GETLOGIN_R:
* This symbol, if defined, indicates that the getlogin_r routine
* is available to getlogin re-entrantly.
*/
/* GETLOGIN_R_PROTO:
* This symbol encodes the prototype of getlogin_r.
* It is zero if d_getlogin_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r
* is defined.
*/
/*#define HAS_GETLOGIN_R /**/
#define GETLOGIN_R_PROTO 0 /**/
/* HAS_GETMNT:
* This symbol, if defined, indicates that the getmnt routine is
* available to get filesystem mount info by filename.
*/
/*#define HAS_GETMNT /**/
/* HAS_GETMNTENT:
* This symbol, if defined, indicates that the getmntent routine is
* available to iterate through mounted file systems to get their info.
*/
/*#define HAS_GETMNTENT /**/
/* HAS_GETNETBYADDR:
* This symbol, if defined, indicates that the getnetbyaddr() routine is
* available to look up networks by their IP addresses.
*/
#define HAS_GETNETBYADDR /**/
/* HAS_GETNETBYNAME:
* This symbol, if defined, indicates that the getnetbyname() routine is
* available to look up networks by their names.
*/
#define HAS_GETNETBYNAME /**/
/* HAS_GETNETENT:
* This symbol, if defined, indicates that the getnetent() routine is
* available to look up network names in some data base or another.
*/
#define HAS_GETNETENT /**/
/* HAS_GETNET_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for getnetent(), getnetbyname(), and
* getnetbyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
#define HAS_GETNET_PROTOS /**/
/* HAS_GETPAGESIZE:
* This symbol, if defined, indicates that the getpagesize system call
* is available to get system page size, which is the granularity of
* many memory management calls.
*/
/*#define HAS_GETPAGESIZE /**/
/* HAS_GETPROTOENT:
* This symbol, if defined, indicates that the getprotoent() routine is
* available to look up protocols in some data base or another.
*/
#define HAS_GETPROTOENT /**/
/* HAS_GETPGRP:
* This symbol, if defined, indicates that the getpgrp routine is
* available to get the current process group.
*/
/* USE_BSD_GETPGRP:
* This symbol, if defined, indicates that getpgrp needs one
* arguments whereas USG one needs none.
*/
#define HAS_GETPGRP /**/
/*#define USE_BSD_GETPGRP /**/
/* HAS_GETPROTOBYNAME:
* This symbol, if defined, indicates that the getprotobyname()
* routine is available to look up protocols by their name.
*/
/* HAS_GETPROTOBYNUMBER:
* This symbol, if defined, indicates that the getprotobynumber()
* routine is available to look up protocols by their number.
*/
#define HAS_GETPROTOBYNAME /**/
#define HAS_GETPROTOBYNUMBER /**/
/* HAS_GETPROTO_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for getprotoent(), getprotobyname(), and
* getprotobyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
#define HAS_GETPROTO_PROTOS /**/
/* HAS_GETPRPWNAM:
* This symbol, if defined, indicates that the getprpwnam system call is
* available to retrieve protected (shadow) password entries by name.
*/
/*#define HAS_GETPRPWNAM /**/
/* HAS_GETPWENT:
* This symbol, if defined, indicates that the getpwent routine is
* available for sequential access of the passwd database.
* If this is not available, the older getpw() function may be available.
*/
/*#define HAS_GETPWENT /**/
/* HAS_GETPWENT_R:
* This symbol, if defined, indicates that the getpwent_r routine
* is available to getpwent re-entrantly.
*/
/* GETPWENT_R_PROTO:
* This symbol encodes the prototype of getpwent_r.
* It is zero if d_getpwent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r
* is defined.
*/
/*#define HAS_GETPWENT_R /**/
#define GETPWENT_R_PROTO 0 /**/
/* HAS_GETPWNAM_R:
* This symbol, if defined, indicates that the getpwnam_r routine
* is available to getpwnam re-entrantly.
*/
/* GETPWNAM_R_PROTO:
* This symbol encodes the prototype of getpwnam_r.
* It is zero if d_getpwnam_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r
* is defined.
*/
/*#define HAS_GETPWNAM_R /**/
#define GETPWNAM_R_PROTO 0 /**/
/* HAS_GETPWUID_R:
* This symbol, if defined, indicates that the getpwuid_r routine
* is available to getpwuid re-entrantly.
*/
/* GETPWUID_R_PROTO:
* This symbol encodes the prototype of getpwuid_r.
* It is zero if d_getpwuid_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r
* is defined.
*/
/*#define HAS_GETPWUID_R /**/
#define GETPWUID_R_PROTO 0 /**/
/* HAS_GETSERVENT:
* This symbol, if defined, indicates that the getservent() routine is
* available to look up network services in some data base or another.
*/
#define HAS_GETSERVENT /**/
/* HAS_GETSERV_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for getservent(), getservbyname(), and
* getservbyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
#define HAS_GETSERV_PROTOS /**/
/* HAS_GETSPNAM:
* This symbol, if defined, indicates that the getspnam system call is
* available to retrieve SysV shadow password entries by name.
*/
/*#define HAS_GETSPNAM /**/
/* HAS_GETSPNAM_R:
* This symbol, if defined, indicates that the getspnam_r routine
* is available to getspnam re-entrantly.
*/
/* GETSPNAM_R_PROTO:
* This symbol encodes the prototype of getspnam_r.
* It is zero if d_getspnam_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r
* is defined.
*/
/*#define HAS_GETSPNAM_R /**/
#define GETSPNAM_R_PROTO 0 /**/
/* HAS_GETSERVBYNAME:
* This symbol, if defined, indicates that the getservbyname()
* routine is available to look up services by their name.
*/
/* HAS_GETSERVBYPORT:
* This symbol, if defined, indicates that the getservbyport()
* routine is available to look up services by their port.
*/
#define HAS_GETSERVBYNAME /**/
#define HAS_GETSERVBYPORT /**/
/* HAS_GMTIME_R:
* This symbol, if defined, indicates that the gmtime_r routine
* is available to gmtime re-entrantly.
*/
/* GMTIME_R_PROTO:
* This symbol encodes the prototype of gmtime_r.
* It is zero if d_gmtime_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r
* is defined.
*/
/*#define HAS_GMTIME_R /**/
#define GMTIME_R_PROTO 0 /**/
/* HAS_GNULIBC:
* This symbol, if defined, indicates to the C program that
* the GNU C library is being used. A better check is to use
* the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
*/
/*#define HAS_GNULIBC /**/
#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
# define _GNU_SOURCE
#endif
/* HAS_HASMNTOPT:
* This symbol, if defined, indicates that the hasmntopt routine is
* available to query the mount options of file systems.
*/
/*#define HAS_HASMNTOPT /**/
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* friends htons() ntohl() ntohs()) are available to do network
* order byte swapping.
*/
/* HAS_HTONS:
* This symbol, if defined, indicates that the htons() routine (and
* friends htonl() ntohl() ntohs()) are available to do network
* order byte swapping.
*/
/* HAS_NTOHL:
* This symbol, if defined, indicates that the ntohl() routine (and
* friends htonl() htons() ntohs()) are available to do network
* order byte swapping.
*/
/* HAS_NTOHS:
* This symbol, if defined, indicates that the ntohs() routine (and
* friends htonl() htons() ntohl()) are available to do network
* order byte swapping.
*/
#define HAS_HTONL /**/
#define HAS_HTONS /**/
#define HAS_NTOHL /**/
#define HAS_NTOHS /**/
/* HAS_INT64_T:
* This symbol will defined if the C compiler supports int64_t.
* Usually the <inttypes.h> needs to be included, but sometimes
* <sys/types.h> is enough.
*/
/*#define HAS_INT64_T /**/
/* HAS_ISASCII:
* This manifest constant lets the C program know that isascii
* is available.
*/
#define HAS_ISASCII /**/
/* HAS_ISFINITE:
* This symbol, if defined, indicates that the isfinite routine is
* available to check whether a double is finite (non-infinity non-NaN).
*/
/*#define HAS_ISFINITE /**/
/* HAS_ISINF:
* This symbol, if defined, indicates that the isinf routine is
* available to check whether a double is an infinity.
*/
/*#define HAS_ISINF /**/
/* HAS_ISNAN:
* This symbol, if defined, indicates that the isnan routine is
* available to check whether a double is a NaN.
*/
/*#define HAS_ISNAN /**/
/* HAS_ISNANL:
* This symbol, if defined, indicates that the isnanl routine is
* available to check whether a long double is a NaN.
*/
/*#define HAS_ISNANL /**/
/* HAS_LCHOWN:
* This symbol, if defined, indicates that the lchown routine is
* available to operate on a symbolic link (instead of following the
* link).
*/
/*#define HAS_LCHOWN /**/
/* HAS_LDBL_DIG:
* This symbol, if defined, indicates that this system's <float.h>
* or <limits.h> defines the symbol LDBL_DIG, which is the number
* of significant digits in a long double precision number. Unlike
* for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
*/
#define HAS_LDBL_DIG /* */
/* HAS_LOCALTIME_R:
* This symbol, if defined, indicates that the localtime_r routine
* is available to localtime re-entrantly.
*/
/* LOCALTIME_R_PROTO:
* This symbol encodes the prototype of localtime_r.
* It is zero if d_localtime_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
* is defined.
*/
/*#define HAS_LOCALTIME_R /**/
#define LOCALTIME_R_PROTO 0 /**/
/* HAS_LONG_DOUBLE:
* This symbol will be defined if the C compiler supports long
* doubles.
*/
/* LONG_DOUBLESIZE:
* This symbol contains the size of a long double, so that the
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long doubles.
*/
#define HAS_LONG_DOUBLE /**/
#ifdef HAS_LONG_DOUBLE
#define LONG_DOUBLESIZE 8 /**/
#endif
/* HAS_LONG_LONG:
* This symbol will be defined if the C compiler supports long long.
*/
/* LONGLONGSIZE:
* This symbol contains the size of a long long, so that the
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long long.
*/
/*#define HAS_LONG_LONG /**/
#ifdef HAS_LONG_LONG
#define LONGLONGSIZE _error_ /**/
#endif
/* HAS_LSEEK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the lseek() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern off_t lseek(int, off_t, int);
*/
#define HAS_LSEEK_PROTO /**/
/* HAS_MADVISE:
* This symbol, if defined, indicates that the madvise system call is
* available to map a file into memory.
*/
/*#define HAS_MADVISE /**/
/* HAS_MEMCHR:
* This symbol, if defined, indicates that the memchr routine is available
* to locate characters within a C string.
*/
#define HAS_MEMCHR /**/
/* HAS_MKDTEMP:
* This symbol, if defined, indicates that the mkdtemp routine is
* available to exclusively create a uniquely named temporary directory.
*/
/*#define HAS_MKDTEMP /**/
/* HAS_MKSTEMP:
* This symbol, if defined, indicates that the mkstemp routine is
* available to exclusively create and open a uniquely named
* temporary file.
*/
/*#define HAS_MKSTEMP /**/
/* HAS_MKSTEMPS:
* This symbol, if defined, indicates that the mkstemps routine is
* available to excluslvely create and open a uniquely named
* (with a suffix) temporary file.
*/
/*#define HAS_MKSTEMPS /**/
/* HAS_MMAP:
* This symbol, if defined, indicates that the mmap system call is
* available to map a file into memory.
*/
/* Mmap_t:
* This symbol holds the return type of the mmap() system call
* (and simultaneously the type of the first argument).
* Usually set to 'void *' or 'cadd_t'.
*/
/*#define HAS_MMAP /**/
#define Mmap_t void * /**/
/* HAS_MODFL:
* This symbol, if defined, indicates that the modfl routine is
* available to split a long double x into a fractional part f and
* an integer part i such that |f| < 1.0 and (f + i) = x.
*/
/* HAS_MODFL_POW32_BUG:
* This symbol, if defined, indicates that the modfl routine is
* broken for long doubles >= pow(2, 32).
* For example from 4294967303.150000 one would get 4294967302.000000
* and 1.150000. The bug has been seen in certain versions of glibc,
* release 2.2.2 is known to be okay.
*/
/*#define HAS_MODFL /**/
/*#define HAS_MODFL_POW32_BUG /**/
/* HAS_MPROTECT:
* This symbol, if defined, indicates that the mprotect system call is
* available to modify the access protection of a memory mapped file.
*/
/*#define HAS_MPROTECT /**/
/* HAS_MSG:
* This symbol, if defined, indicates that the entire msg*(2) library is
* supported (IPC mechanism based on message queues).
*/
/*#define HAS_MSG /**/
/* HAS_STRUCT_MSGHDR:
* This symbol, if defined, indicates that the struct msghdr
* is supported.
*/
/*#define HAS_STRUCT_MSGHDR /**/
/* HAS_OFF64_T:
* This symbol will be defined if the C compiler supports off64_t.
*/
/*#define HAS_OFF64_T /**/
/* HAS_OPEN3:
* This manifest constant lets the C program know that the three
* argument form of open(2) is available.
*/
#define HAS_OPEN3 /**/
/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
* in joinable (aka undetached) state. NOTE: not defined
* if pthread.h already has defined PTHREAD_CREATE_JOINABLE
* (the new version of the constant).
* If defined, known values are PTHREAD_CREATE_UNDETACHED
* and __UNDETACHED.
*/
/*#define OLD_PTHREAD_CREATE_JOINABLE /**/
/* HAS_PTHREAD_YIELD:
* This symbol, if defined, indicates that the pthread_yield
* routine is available to yield the execution of the current
* thread. sched_yield is preferable to pthread_yield.
*/
/* SCHED_YIELD:
* This symbol defines the way to yield the execution of
* the current thread. Known ways are sched_yield,
* pthread_yield, and pthread_yield with NULL.
*/
/* HAS_SCHED_YIELD:
* This symbol, if defined, indicates that the sched_yield
* routine is available to yield the execution of the current
* thread. sched_yield is preferable to pthread_yield.
*/
/*#define HAS_PTHREAD_YIELD /**/
#define SCHED_YIELD /**/
/*#define HAS_SCHED_YIELD /**/
/* HAS_RANDOM_R:
* This symbol, if defined, indicates that the random_r routine
* is available to random re-entrantly.
*/
/* RANDOM_R_PROTO:
* This symbol encodes the prototype of random_r.
* It is zero if d_random_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r
* is defined.
*/
/*#define HAS_RANDOM_R /**/
#define RANDOM_R_PROTO 0 /**/
/* HAS_READDIR_R:
* This symbol, if defined, indicates that the readdir_r routine
* is available to readdir re-entrantly.
*/
/* READDIR_R_PROTO:
* This symbol encodes the prototype of readdir_r.
* It is zero if d_readdir_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r
* is defined.
*/
/*#define HAS_READDIR_R /**/
#define READDIR_R_PROTO 0 /**/
/* HAS_READV:
* This symbol, if defined, indicates that the readv routine is
* available to do gather reads. You will also need <sys/uio.h>
* and there I_SYSUIO.
*/
/*#define HAS_READV /**/
/* HAS_RECVMSG:
* This symbol, if defined, indicates that the recvmsg routine is
* available to send structured socket messages.
*/
/*#define HAS_RECVMSG /**/
/* HAS_SAFE_BCOPY:
* This symbol, if defined, indicates that the bcopy routine is available
* to copy potentially overlapping memory blocks. Normally, you should
* probably use memmove() or memcpy(). If neither is defined, roll your
* own version.
*/
/*#define HAS_SAFE_BCOPY /**/
/* HAS_SAFE_MEMCPY:
* This symbol, if defined, indicates that the memcpy routine is available
* to copy potentially overlapping memory blocks. If you need to
* copy overlapping memory blocks, you should check HAS_MEMMOVE and
* use memmove() instead, if available.
*/
/*#define HAS_SAFE_MEMCPY /**/
/* HAS_SANE_MEMCMP:
* This symbol, if defined, indicates that the memcmp routine is available
* and can be used to compare relative magnitudes of chars with their high
* bits set. If it is not defined, roll your own version.
*/
#define HAS_SANE_MEMCMP /**/
/* HAS_SBRK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the sbrk() function. Otherwise, it is up
* to the program to supply one. Good guesses are
* extern void* sbrk(int);
* extern void* sbrk(size_t);
*/
/*#define HAS_SBRK_PROTO /**/
/* HAS_SEM:
* This symbol, if defined, indicates that the entire sem*(2) library is
* supported.
*/
/*#define HAS_SEM /**/
/* HAS_SENDMSG:
* This symbol, if defined, indicates that the sendmsg routine is
* available to send structured socket messages.
*/
/*#define HAS_SENDMSG /**/
/* HAS_SETGRENT:
* This symbol, if defined, indicates that the setgrent routine is
* available for initializing sequential access of the group database.
*/
/*#define HAS_SETGRENT /**/
/* HAS_SETGRENT_R:
* This symbol, if defined, indicates that the setgrent_r routine
* is available to setgrent re-entrantly.
*/
/* SETGRENT_R_PROTO:
* This symbol encodes the prototype of setgrent_r.
* It is zero if d_setgrent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r
* is defined.
*/
/*#define HAS_SETGRENT_R /**/
#define SETGRENT_R_PROTO 0 /**/
/* HAS_SETGROUPS:
* This symbol, if defined, indicates that the setgroups() routine is
* available to set the list of process groups. If unavailable, multiple
* groups are probably not supported.
*/
/*#define HAS_SETGROUPS /**/
/* HAS_SETHOSTENT:
* This symbol, if defined, indicates that the sethostent() routine is
* available.
*/
#define HAS_SETHOSTENT /**/
/* HAS_SETITIMER:
* This symbol, if defined, indicates that the setitimer routine is
* available to set interval timers.
*/
/*#define HAS_SETITIMER /**/
/* HAS_SETNETENT:
* This symbol, if defined, indicates that the setnetent() routine is
* available.
*/
#define HAS_SETNETENT /**/
/* HAS_SETPROTOENT:
* This symbol, if defined, indicates that the setprotoent() routine is
* available.
*/
#define HAS_SETPROTOENT /**/
/* HAS_SETPGRP:
* This symbol, if defined, indicates that the setpgrp routine is
* available to set the current process group.
*/
/* USE_BSD_SETPGRP:
* This symbol, if defined, indicates that setpgrp needs two
* arguments whereas USG one needs none. See also HAS_SETPGID
* for a POSIX interface.
*/
/*#define HAS_SETPGRP /**/
/*#define USE_BSD_SETPGRP /**/
/* HAS_SETPROCTITLE:
* This symbol, if defined, indicates that the setproctitle routine is
* available to set process title.
*/
/*#define HAS_SETPROCTITLE /**/
/* HAS_SETPWENT:
* This symbol, if defined, indicates that the setpwent routine is
* available for initializing sequential access of the passwd database.
*/
/*#define HAS_SETPWENT /**/
/* HAS_SETPWENT_R:
* This symbol, if defined, indicates that the setpwent_r routine
* is available to setpwent re-entrantly.
*/
/* SETPWENT_R_PROTO:
* This symbol encodes the prototype of setpwent_r.
* It is zero if d_setpwent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r
* is defined.
*/
/*#define HAS_SETPWENT_R /**/
#define SETPWENT_R_PROTO 0 /**/
/* HAS_SETSERVENT:
* This symbol, if defined, indicates that the setservent() routine is
* available.
*/
#define HAS_SETSERVENT /**/
/* HAS_SETVBUF:
* This symbol, if defined, indicates that the setvbuf routine is
* available to change buffering on an open stdio stream.
* to a line-buffered mode.
*/
#define HAS_SETVBUF /**/
/* USE_SFIO:
* This symbol, if defined, indicates that sfio should
* be used.
*/
/*#define USE_SFIO /**/
/* HAS_SHM:
* This symbol, if defined, indicates that the entire shm*(2) library is
* supported.
*/
/*#define HAS_SHM /**/
/* HAS_SIGACTION:
* This symbol, if defined, indicates that Vr4's sigaction() routine
* is available.
*/
/*#define HAS_SIGACTION /**/
/* HAS_SIGSETJMP:
* This variable indicates to the C program that the sigsetjmp()
* routine is available to save the calling process's registers
* and stack environment for later use by siglongjmp(), and
* to optionally save the process's signal mask. See
* Sigjmp_buf, Sigsetjmp, and Siglongjmp.
*/
/* Sigjmp_buf:
* This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
/* Sigsetjmp:
* This macro is used in the same way as sigsetjmp(), but will invoke
* traditional setjmp() if sigsetjmp isn't available.
* See HAS_SIGSETJMP.
*/
/* Siglongjmp:
* This macro is used in the same way as siglongjmp(), but will invoke
* traditional longjmp() if siglongjmp isn't available.
* See HAS_SIGSETJMP.
*/
/*#define HAS_SIGSETJMP /**/
#ifdef HAS_SIGSETJMP
#define Sigjmp_buf sigjmp_buf
#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
#else
#define Sigjmp_buf jmp_buf
#define Sigsetjmp(buf,save_mask) setjmp((buf))
#define Siglongjmp(buf,retval) longjmp((buf),(retval))
#endif
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
*/
/* HAS_SOCKETPAIR:
* This symbol, if defined, indicates that the BSD socketpair() call is
* supported.
*/
/* HAS_MSG_CTRUNC:
* This symbol, if defined, indicates that the MSG_CTRUNC is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_MSG_DONTROUTE:
* This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_MSG_OOB:
* This symbol, if defined, indicates that the MSG_OOB is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_MSG_PEEK:
* This symbol, if defined, indicates that the MSG_PEEK is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_MSG_PROXY:
* This symbol, if defined, indicates that the MSG_PROXY is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
/* HAS_SCM_RIGHTS:
* This symbol, if defined, indicates that the SCM_RIGHTS is supported.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
#define HAS_SOCKET /**/
/*#define HAS_SOCKETPAIR /**/
/*#define HAS_MSG_CTRUNC /**/
/*#define HAS_MSG_DONTROUTE /**/
/*#define HAS_MSG_OOB /**/
/*#define HAS_MSG_PEEK /**/
/*#define HAS_MSG_PROXY /**/
/*#define HAS_SCM_RIGHTS /**/
/* HAS_SOCKS5_INIT:
* This symbol, if defined, indicates that the socks5_init routine is
* available to initialize SOCKS 5.
*/
/*#define HAS_SOCKS5_INIT /**/
/* HAS_SQRTL:
* This symbol, if defined, indicates that the sqrtl routine is
* available to do long double square roots.
*/
/*#define HAS_SQRTL /**/
/* HAS_SRAND48_R:
* This symbol, if defined, indicates that the srand48_r routine
* is available to srand48 re-entrantly.
*/
/* SRAND48_R_PROTO:
* This symbol encodes the prototype of srand48_r.
* It is zero if d_srand48_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r
* is defined.
*/
/*#define HAS_SRAND48_R /**/
#define SRAND48_R_PROTO 0 /**/
/* HAS_SRANDOM_R:
* This symbol, if defined, indicates that the srandom_r routine
* is available to srandom re-entrantly.
*/
/* SRANDOM_R_PROTO:
* This symbol encodes the prototype of srandom_r.
* It is zero if d_srandom_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r
* is defined.
*/
/*#define HAS_SRANDOM_R /**/
#define SRANDOM_R_PROTO 0 /**/
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
*/
#ifndef USE_STAT_BLOCKS
/*#define USE_STAT_BLOCKS /**/
#endif
/* HAS_STRUCT_STATFS_F_FLAGS:
* This symbol, if defined, indicates that the struct statfs
* does have the f_flags member containing the mount flags of
* the filesystem containing the file.
* This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
* not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
* have statfs() and struct statfs, they have ustat() and getmnt()
* with struct ustat and struct fs_data.
*/
/*#define HAS_STRUCT_STATFS_F_FLAGS /**/
/* HAS_STRUCT_STATFS:
* This symbol, if defined, indicates that the struct statfs
* to do statfs() is supported.
*/
/*#define HAS_STRUCT_STATFS /**/
/* HAS_FSTATVFS:
* This symbol, if defined, indicates that the fstatvfs routine is
* available to stat filesystems by file descriptors.
*/
/*#define HAS_FSTATVFS /**/
/* USE_STDIO_PTR:
* This symbol is defined if the _ptr and _cnt fields (or similar)
* of the stdio FILE structure can be used to access the stdio buffer
* for a file handle. If this is defined, then the FILE_ptr(fp)
* and FILE_cnt(fp) macros will also be defined and should be used
* to access these fields.
*/
/* FILE_ptr:
* This macro is used to access the _ptr field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* defined if USE_STDIO_PTR is defined.
*/
/* STDIO_PTR_LVALUE:
* This symbol is defined if the FILE_ptr macro can be used as an
* lvalue.
*/
/* FILE_cnt:
* This macro is used to access the _cnt field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* defined if USE_STDIO_PTR is defined.
*/
/* STDIO_CNT_LVALUE:
* This symbol is defined if the FILE_cnt macro can be used as an
* lvalue.
*/
/* STDIO_PTR_LVAL_SETS_CNT:
* This symbol is defined if using the FILE_ptr macro as an lvalue
* to increase the pointer by n has the side effect of decreasing the
* value of File_cnt(fp) by n.
*/
/* STDIO_PTR_LVAL_NOCHANGE_CNT:
* This symbol is defined if using the FILE_ptr macro as an lvalue
* to increase the pointer by n leaves File_cnt(fp) unchanged.
*/
#define USE_STDIO_PTR /**/
#ifdef USE_STDIO_PTR
#define FILE_ptr(fp) ((fp)->_ptr)
#define STDIO_PTR_LVALUE /**/
#define FILE_cnt(fp) ((fp)->_cnt)
#define STDIO_CNT_LVALUE /**/
/*#define STDIO_PTR_LVAL_SETS_CNT /**/
/*#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
#endif
/* USE_STDIO_BASE:
* This symbol is defined if the _base field (or similar) of the
* stdio FILE structure can be used to access the stdio buffer for
* a file handle. If this is defined, then the FILE_base(fp) macro
* will also be defined and should be used to access this field.
* Also, the FILE_bufsiz(fp) macro will be defined and should be used
* to determine the number of bytes in the buffer. USE_STDIO_BASE
* will never be defined unless USE_STDIO_PTR is.
*/
/* FILE_base:
* This macro is used to access the _base field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* defined if USE_STDIO_BASE is defined.
*/
/* FILE_bufsiz:
* This macro is used to determine the number of bytes in the I/O
* buffer pointed to by _base field (or equivalent) of the FILE
* structure pointed to its argument. This macro will always be defined
* if USE_STDIO_BASE is defined.
*/
#define USE_STDIO_BASE /**/
#ifdef USE_STDIO_BASE
#define FILE_base(fp) ((fp)->_base)
#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
#endif
/* HAS_STRERROR:
* This symbol, if defined, indicates that the strerror routine is
* available to translate error numbers to strings. See the writeup
* of Strerror() in this file before you try to define your own.
*/
/* HAS_SYS_ERRLIST:
* This symbol, if defined, indicates that the sys_errlist array is
* available to translate error numbers to strings. The extern int
* sys_nerr gives the size of that table.
*/
/* Strerror:
* This preprocessor symbol is defined as a macro if strerror() is
* not available to translate error numbers to strings but sys_errlist[]
* array is there.
*/
#define HAS_STRERROR /**/
#define HAS_SYS_ERRLIST /**/
#define Strerror(e) strerror(e)
/* HAS_STRERROR_R:
* This symbol, if defined, indicates that the strerror_r routine
* is available to strerror re-entrantly.
*/
/* STRERROR_R_PROTO:
* This symbol encodes the prototype of strerror_r.
* It is zero if d_strerror_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
* is defined.
*/
/*#define HAS_STRERROR_R /**/
#define STRERROR_R_PROTO 0 /**/
/* HAS_STRTOLD:
* This symbol, if defined, indicates that the strtold routine is
* available to convert strings to long doubles.
*/
/*#define HAS_STRTOLD /**/
/* HAS_STRTOLL:
* This symbol, if defined, indicates that the strtoll routine is
* available to convert strings to long longs.
*/
/*#define HAS_STRTOLL /**/
/* HAS_STRTOQ:
* This symbol, if defined, indicates that the strtoq routine is
* available to convert strings to long longs (quads).
*/
/*#define HAS_STRTOQ /**/
/* HAS_STRTOUL:
* This symbol, if defined, indicates that the strtoul routine is
* available to provide conversion of strings to unsigned long.
*/
#define HAS_STRTOUL /**/
/* HAS_STRTOULL:
* This symbol, if defined, indicates that the strtoull routine is
* available to convert strings to unsigned long longs.
*/
/*#define HAS_STRTOULL /**/
/* HAS_STRTOUQ:
* This symbol, if defined, indicates that the strtouq routine is
* available to convert strings to unsigned long longs (quads).
*/
/*#define HAS_STRTOUQ /**/
/* HAS_TELLDIR_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the telldir() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern long telldir(DIR*);
*/
/*#define HAS_TELLDIR_PROTO /**/
/* HAS_TIME:
* This symbol, if defined, indicates that the time() routine exists.
*/
/* Time_t:
* This symbol holds the type returned by time(). It can be long,
* or time_t on BSD sites (in which case <sys/types.h> should be
* included).
*/
#define HAS_TIME /**/
#define Time_t time_t /* Time type */
/* HAS_TIMES:
* This symbol, if defined, indicates that the times() routine exists.
* Note that this became obsolete on some systems (SUNOS), which now
* use getrusage(). It may be necessary to include <sys/times.h>.
*/
#define HAS_TIMES /**/
/* HAS_TMPNAM_R:
* This symbol, if defined, indicates that the tmpnam_r routine
* is available to tmpnam re-entrantly.
*/
/* TMPNAM_R_PROTO:
* This symbol encodes the prototype of tmpnam_r.
* It is zero if d_tmpnam_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
* is defined.
*/
/*#define HAS_TMPNAM_R /**/
#define TMPNAM_R_PROTO 0 /**/
/* HAS_UALARM:
* This symbol, if defined, indicates that the ualarm routine is
* available to do alarms with microsecond granularity.
*/
/*#define HAS_UALARM /**/
/* HAS_UNION_SEMUN:
* This symbol, if defined, indicates that the union semun is
* defined by including <sys/sem.h>. If not, the user code
* probably needs to define it as:
* union semun {
* int val;
* struct semid_ds *buf;
* unsigned short *array;
* }
*/
/* USE_SEMCTL_SEMUN:
* This symbol, if defined, indicates that union semun is
* used for semctl IPC_STAT.
*/
/* USE_SEMCTL_SEMID_DS:
* This symbol, if defined, indicates that struct semid_ds * is
* used for semctl IPC_STAT.
*/
/*#define HAS_UNION_SEMUN /**/
/*#define USE_SEMCTL_SEMUN /**/
/*#define USE_SEMCTL_SEMID_DS /**/
/* HAS_UNORDERED:
* This symbol, if defined, indicates that the unordered routine is
* available to check whether two doubles are unordered
* (effectively: whether either of them is NaN)
*/
/*#define HAS_UNORDERED /**/
/* HAS_USTAT:
* This symbol, if defined, indicates that the ustat system call is
* available to query file system statistics by dev_t.
*/
/*#define HAS_USTAT /**/
/* HAS_VFORK:
* This symbol, if defined, indicates that vfork() exists.
*/
/*#define HAS_VFORK /**/
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* appropriate return type of a signal handler. Thus, you can declare
* a signal handler using "Signal_t (*handler)()", and define the
* handler using "Signal_t handler(sig)".
*/
#define Signal_t void /* Signal handler's return type */
/* HAS_VPRINTF:
* This symbol, if defined, indicates that the vprintf routine is available
* to printf with a pointer to an argument list. If unavailable, you
* may need to write your own, probably in terms of _doprnt().
*/
/* USE_CHAR_VSPRINTF:
* This symbol is defined if this system has vsprintf() returning type
* (char*). The trend seems to be to declare it as "int vsprintf()". It
* is up to the package author to declare vsprintf correctly based on the
* symbol.
*/
#define HAS_VPRINTF /**/
/*#define USE_CHAR_VSPRINTF /**/
/* HAS_WRITEV:
* This symbol, if defined, indicates that the writev routine is
* available to do scatter writes.
*/
/*#define HAS_WRITEV /**/
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
*/
/*#define USE_DYNAMIC_LOADING /**/
/* DOUBLESIZE:
* This symbol contains the size of a double, so that the C preprocessor
* can make decisions based on it.
*/
#define DOUBLESIZE 8 /**/
/* EBCDIC:
* This symbol, if defined, indicates that this system uses
* EBCDIC encoding.
*/
/*#define EBCDIC /**/
/* FFLUSH_NULL:
* This symbol, if defined, tells that fflush(NULL) does flush
* all pending stdio output.
*/
/* FFLUSH_ALL:
* This symbol, if defined, tells that to flush
* all pending stdio output one must loop through all
* the stdio file handles stored in an array and fflush them.
* Note that if fflushNULL is defined, fflushall will not
* even be probed for and will be left undefined.
*/
#define FFLUSH_NULL /**/
/*#define FFLUSH_ALL /**/
/* Fpos_t:
* This symbol holds the type used to declare file positions in libc.
* It can be fpos_t, long, uint, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
#define Fpos_t fpos_t /* File position type */
/* Gid_t_f:
* This symbol defines the format string used for printing a Gid_t.
*/
#define Gid_t_f "d" /**/
/* Gid_t_sign:
* This symbol holds the signedess of a Gid_t.
* 1 for unsigned, -1 for signed.
*/
#define Gid_t_sign -1 /* GID sign */
/* Gid_t_size:
* This symbol holds the size of a Gid_t in bytes.
*/
#define Gid_t_size 4 /* GID size */
/* Gid_t:
* This symbol holds the return type of getgid() and the type of
* argument to setrgid() and related functions. Typically,
* it is the type of group ids in the kernel. It can be int, ushort,
* gid_t, etc... It may be necessary to include <sys/types.h> to get
* any typedef'ed information.
*/
#define Gid_t gid_t /* Type for getgid(), etc... */
/* Groups_t:
* This symbol holds the type used for the second argument to
* getgroups() and setgroups(). Usually, this is the same as
* gidtype (gid_t) , but sometimes it isn't.
* It can be int, ushort, gid_t, etc...
* It may be necessary to include <sys/types.h> to get any
* typedef'ed information. This is only required if you have
* getgroups() or setgroups()..
*/
#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
#endif
/* DB_Prefix_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
* int, while in newer ones it is u_int32_t.
*/
/* DB_Hash_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
* int, while in newer ones it is size_t.
*/
/* DB_VERSION_MAJOR_CFG:
* This symbol, if defined, defines the major version number of
* Berkeley DB found in the <db.h> header when Perl was configured.
*/
/* DB_VERSION_MINOR_CFG:
* This symbol, if defined, defines the minor version number of
* Berkeley DB found in the <db.h> header when Perl was configured.
* For DB version 1 this is always 0.
*/
/* DB_VERSION_PATCH_CFG:
* This symbol, if defined, defines the patch version number of
* Berkeley DB found in the <db.h> header when Perl was configured.
* For DB version 1 this is always 0.
*/
#define DB_Hash_t int /**/
#define DB_Prefix_t int /**/
#define DB_VERSION_MAJOR_CFG undef /**/
#define DB_VERSION_MINOR_CFG undef /**/
#define DB_VERSION_PATCH_CFG undef /**/
/* I_FP_CLASS:
* This symbol, if defined, indicates that <fp_class.h> exists and
* should be included.
*/
/*#define I_FP_CLASS /**/
/* I_GRP:
* This symbol, if defined, indicates to the C program that it should
* include <grp.h>.
*/
/* GRPASSWD:
* This symbol, if defined, indicates to the C program that struct group
* in <grp.h> contains gr_passwd.
*/
#define I_GRP /**/
/*#define GRPASSWD /**/
/* I_IEEEFP:
* This symbol, if defined, indicates that <ieeefp.h> exists and
* should be included.
*/
/*#define I_IEEEFP /**/
/* I_INTTYPES:
* This symbol, if defined, indicates to the C program that it should
* include <inttypes.h>.
*/
/*#define I_INTTYPES /**/
/* I_LIBUTIL:
* This symbol, if defined, indicates that <libutil.h> exists and
* should be included.
*/
/*#define I_LIBUTIL /**/
/* I_MACH_CTHREADS:
* This symbol, if defined, indicates to the C program that it should
* include <mach/cthreads.h>.
*/
/*#define I_MACH_CTHREADS /**/
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
*/
/*#define I_MNTENT /**/
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
* should be included.
*/
#define I_NETDB /**/
/* I_NETINET_TCP:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/tcp.h>.
*/
/*#define I_NETINET_TCP /**/
/* I_POLL:
* This symbol, if defined, indicates that <poll.h> exists and
* should be included.
*/
/*#define I_POLL /**/
/* I_PROT:
* This symbol, if defined, indicates that <prot.h> exists and
* should be included.
*/
/*#define I_PROT /**/
/* I_PTHREAD:
* This symbol, if defined, indicates to the C program that it should
* include <pthread.h>.
*/
/*#define I_PTHREAD /**/
/* I_PWD:
* This symbol, if defined, indicates to the C program that it should
* include <pwd.h>.
*/
/* PWQUOTA:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_quota.
*/
/* PWAGE:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_age.
*/
/* PWCHANGE:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_change.
*/
/* PWCLASS:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_class.
*/
/* PWEXPIRE:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_expire.
*/
/* PWCOMMENT:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_comment.
*/
/* PWGECOS:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_gecos.
*/
/* PWPASSWD:
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_passwd.
*/
#define I_PWD /**/
/*#define PWQUOTA /**/
/*#define PWAGE /**/
/*#define PWCHANGE /**/
/*#define PWCLASS /**/
/*#define PWEXPIRE /**/
/*#define PWCOMMENT /**/
/*#define PWGECOS /**/
/*#define PWPASSWD /**/
/* I_SHADOW:
* This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
*/
/*#define I_SHADOW /**/
/* I_SOCKS:
* This symbol, if defined, indicates that <socks.h> exists and
* should be included.
*/
/*#define I_SOCKS /**/
/* I_SUNMATH:
* This symbol, if defined, indicates that <sunmath.h> exists and
* should be included.
*/
/*#define I_SUNMATH /**/
/* I_SYSLOG:
* This symbol, if defined, indicates that <syslog.h> exists and
* should be included.
*/
/*#define I_SYSLOG /**/
/* I_SYSMODE:
* This symbol, if defined, indicates that <sys/mode.h> exists and
* should be included.
*/
/*#define I_SYSMODE /**/
/* I_SYS_MOUNT:
* This symbol, if defined, indicates that <sys/mount.h> exists and
* should be included.
*/
/*#define I_SYS_MOUNT /**/
/* I_SYS_STATFS:
* This symbol, if defined, indicates that <sys/statfs.h> exists.
*/
/*#define I_SYS_STATFS /**/
/* I_SYS_STATVFS:
* This symbol, if defined, indicates that <sys/statvfs.h> exists and
* should be included.
*/
/*#define I_SYS_STATVFS /**/
/* I_SYSUIO:
* This symbol, if defined, indicates that <sys/uio.h> exists and
* should be included.
*/
/*#define I_SYSUIO /**/
/* I_SYSUTSNAME:
* This symbol, if defined, indicates that <sys/utsname.h> exists and
* should be included.
*/
#define I_SYSUTSNAME /**/
/* I_SYS_VFS:
* This symbol, if defined, indicates that <sys/vfs.h> exists and
* should be included.
*/
/*#define I_SYS_VFS /**/
/* I_TIME:
* This symbol, if defined, indicates to the C program that it should
* include <time.h>.
*/
/* I_SYS_TIME:
* This symbol, if defined, indicates to the C program that it should
* include <sys/time.h>.
*/
/* I_SYS_TIME_KERNEL:
* This symbol, if defined, indicates to the C program that it should
* include <sys/time.h> with KERNEL defined.
*/
/* HAS_TM_TM_ZONE:
* This symbol, if defined, indicates to the C program that
* the struct tm has a tm_zone field.
*/
/*#define I_TIME /**/
#define I_SYS_TIME /**/
/*#define I_SYS_TIME_KERNEL /**/
/*#define HAS_TM_TM_ZONE /**/
/* I_USTAT:
* This symbol, if defined, indicates that <ustat.h> exists and
* should be included.
*/
/*#define I_USTAT /**/
/* PERL_INC_VERSION_LIST:
* This variable specifies the list of subdirectories in over
* which perl.c:incpush() and lib/lib.pm will automatically
* search when adding directories to @INC, in a format suitable
* for a C initialization string. See the inc_version_list entry
* in Porting/Glossary for more details.
*/
#define PERL_INC_VERSION_LIST 0 /**/
/* INSTALL_USR_BIN_PERL:
* This symbol, if defined, indicates that Perl is to be installed
* also as /usr/bin/perl.
*/
/*#define INSTALL_USR_BIN_PERL /**/
/* PERL_PRIfldbl:
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'f') for output.
*/
/* PERL_PRIgldbl:
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'g') for output.
*/
/* PERL_PRIeldbl:
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'e') for output.
*/
/* PERL_SCNfldbl:
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'f') for input.
*/
#define PERL_PRIfldbl "Lf" /**/
#define PERL_PRIgldbl "Lg" /**/
#define PERL_PRIeldbl "Le" /**/
#define PERL_SCNfldbl "Lf" /**/
/* Off_t:
* This symbol holds the type used to declare offsets in the kernel.
* It can be int, long, off_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
/* LSEEKSIZE:
* This symbol holds the number of bytes used by the Off_t.
*/
/* Off_t_size:
* This symbol holds the number of bytes used by the Off_t.
*/
#define Off_t off_t /* <offset> type */
#define LSEEKSIZE 4 /* <offset> size */
#define Off_t_size 4 /* <offset> size */
/* Free_t:
* This variable contains the return type of free(). It is usually
* void, but occasionally int.
*/
/* Malloc_t:
* This symbol is the type of pointer returned by malloc and realloc.
*/
#define Malloc_t void * /**/
#define Free_t void /**/
/* MYMALLOC:
* This symbol, if defined, indicates that we're using our own malloc.
*/
/*#define MYMALLOC /**/
/* Mode_t:
* This symbol holds the type used to declare file modes
* for systems calls. It is usually mode_t, but may be
* int or unsigned short. It may be necessary to include <sys/types.h>
* to get any typedef'ed information.
*/
#define Mode_t mode_t /* file mode parameter for system calls */
/* VAL_O_NONBLOCK:
* This symbol is to be used during open() or fcntl(F_SETFL) to turn on
* non-blocking I/O for the file descriptor. Note that there is no way
* back, i.e. you cannot turn it blocking again this way. If you wish to
* alternatively switch between blocking and non-blocking, use the
* ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
*/
/* VAL_EAGAIN:
* This symbol holds the errno error code set by read() when no data was
* present on the non-blocking file descriptor.
*/
/* RD_NODATA:
* This symbol holds the return code from read() when no data is present
* on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
* not defined, then you can't distinguish between no data and EOF by
* issuing a read(). You'll have to find another way to tell for sure!
*/
/* EOF_NONBLOCK:
* This symbol, if defined, indicates to the C program that a read() on
* a non-blocking file descriptor will return 0 on EOF, and not the value
* held in RD_NODATA (-1 usually, in that case!).
*/
#define VAL_O_NONBLOCK O_NONBLOCK
#define VAL_EAGAIN EAGAIN
#define RD_NODATA -1
#define EOF_NONBLOCK
/* NEED_VA_COPY:
* This symbol, if defined, indicates that the system stores
* the variable argument list datatype, va_list, in a format
* that cannot be copied by simple assignment, so that some
* other means must be used when copying is required.
* As such systems vary in their provision (or non-provision)
* of copying mechanisms, handy.h defines a platform-
* independent macro, Perl_va_copy(src, dst), to do the job.
*/
/*#define NEED_VA_COPY /**/
/* Netdb_host_t:
* This symbol holds the type used for the 1st argument
* to gethostbyaddr().
*/
/* Netdb_hlen_t:
* This symbol holds the type used for the 2nd argument
* to gethostbyaddr().
*/
/* Netdb_name_t:
* This symbol holds the type used for the argument to
* gethostbyname().
*/
/* Netdb_net_t:
* This symbol holds the type used for the 1st argument to
* getnetbyaddr().
*/
#define Netdb_host_t char * /**/
#define Netdb_hlen_t int /**/
#define Netdb_name_t char * /**/
#define Netdb_net_t long /**/
/* PERL_OTHERLIBDIRS:
* This variable contains a colon-separated set of paths for the perl
* binary to search for additional library files or modules.
* These directories will be tacked to the end of @INC.
* Perl will automatically search below each path for version-
* and architecture-specific directories. See PERL_INC_VERSION_LIST
* for more details.
*/
/*#define PERL_OTHERLIBDIRS "" /**/
/* IVTYPE:
* This symbol defines the C type used for Perl's IV.
*/
/* UVTYPE:
* This symbol defines the C type used for Perl's UV.
*/
/* I8TYPE:
* This symbol defines the C type used for Perl's I8.
*/
/* U8TYPE:
* This symbol defines the C type used for Perl's U8.
*/
/* I16TYPE:
* This symbol defines the C type used for Perl's I16.
*/
/* U16TYPE:
* This symbol defines the C type used for Perl's U16.
*/
/* I32TYPE:
* This symbol defines the C type used for Perl's I32.
*/
/* U32TYPE:
* This symbol defines the C type used for Perl's U32.
*/
/* I64TYPE:
* This symbol defines the C type used for Perl's I64.
*/
/* U64TYPE:
* This symbol defines the C type used for Perl's U64.
*/
/* NVTYPE:
* This symbol defines the C type used for Perl's NV.
*/
/* IVSIZE:
* This symbol contains the sizeof(IV).
*/
/* UVSIZE:
* This symbol contains the sizeof(UV).
*/
/* I8SIZE:
* This symbol contains the sizeof(I8).
*/
/* U8SIZE:
* This symbol contains the sizeof(U8).
*/
/* I16SIZE:
* This symbol contains the sizeof(I16).
*/
/* U16SIZE:
* This symbol contains the sizeof(U16).
*/
/* I32SIZE:
* This symbol contains the sizeof(I32).
*/
/* U32SIZE:
* This symbol contains the sizeof(U32).
*/
/* I64SIZE:
* This symbol contains the sizeof(I64).
*/
/* U64SIZE:
* This symbol contains the sizeof(U64).
*/
/* NVSIZE:
* This symbol contains the sizeof(NV).
*/
/* NV_PRESERVES_UV:
* This symbol, if defined, indicates that a variable of type NVTYPE
* can preserve all the bits of a variable of type UVTYPE.
*/
/* NV_PRESERVES_UV_BITS:
* This symbol contains the number of bits a variable of type NVTYPE
* can preserve of a variable of type UVTYPE.
*/
#define IVTYPE int /**/
#define UVTYPE unsigned int /**/
#define I8TYPE char /**/
#define U8TYPE unsigned char /**/
#define I16TYPE short /**/
#define U16TYPE unsigned short /**/
#define I32TYPE int /**/
#define U32TYPE unsigned int /**/
#ifdef HAS_QUAD
#define I64TYPE _error_ /**/
#define U64TYPE _error_ /**/
#endif
#define NVTYPE double /**/
#define IVSIZE 4 /**/
#define UVSIZE 4 /**/
#define I8SIZE 1 /**/
#define U8SIZE 1 /**/
#define I16SIZE 2 /**/
#define U16SIZE 2 /**/
#define I32SIZE 4 /**/
#define U32SIZE 4 /**/
#ifdef HAS_QUAD
#define I64SIZE _error_ /**/
#define U64SIZE _error_ /**/
#endif
#define NVSIZE 8 /**/
#define NV_PRESERVES_UV
#define NV_PRESERVES_UV_BITS 32
/* IVdf:
* This symbol defines the format string used for printing a Perl IV
* as a signed decimal integer.
*/
/* UVuf:
* This symbol defines the format string used for printing a Perl UV
* as an unsigned decimal integer.
*/
/* UVof:
* This symbol defines the format string used for printing a Perl UV
* as an unsigned octal integer.
*/
/* UVxf:
* This symbol defines the format string used for printing a Perl UV
* as an unsigned hexadecimal integer in lowercase abcdef.
*/
/* UVXf:
* This symbol defines the format string used for printing a Perl UV
* as an unsigned hexadecimal integer in uppercase ABCDEF.
*/
/* NVef:
* This symbol defines the format string used for printing a Perl NV
* using %e-ish floating point format.
*/
/* NVff:
* This symbol defines the format string used for printing a Perl NV
* using %f-ish floating point format.
*/
/* NVgf:
* This symbol defines the format string used for printing a Perl NV
* using %g-ish floating point format.
*/
#define IVdf "d" /**/
#define UVuf "u" /**/
#define UVof "o" /**/
#define UVxf "x" /**/
#define UVXf "X" /**/
#define NVef "e" /**/
#define NVff "f" /**/
#define NVgf "g" /**/
/* Pid_t:
* This symbol holds the type used to declare process ids in the kernel.
* It can be int, uint, pid_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
#define Pid_t pid_t /* PID type */
/* PRIVLIB:
* This symbol contains the name of the private library for this package.
* The library is private in the sense that it needn't be in anyone's
* execution path, but it should be accessible by the world. The program
* should be prepared to do ~ expansion.
*/
/* PRIVLIB_EXP:
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
#define PRIVLIB "/system/ported/lib/perl5/5.8.0" /**/
#define PRIVLIB_EXP "/system/ported/lib/perl5/5.8.0" /**/
/* PTRSIZE:
* This symbol contains the size of a pointer, so that the C preprocessor
* can make decisions based on it. It will be sizeof(void *) if
* the compiler supports (void *); otherwise it will be
* sizeof(char *).
*/
#define PTRSIZE 4 /**/
/* Drand01:
* This macro is to be used to generate uniformly distributed
* random numbers over the range [0., 1.[. You may have to supply
* an 'extern double drand48();' in your program since SunOS 4.1.3
* doesn't provide you with anything relevant in its headers.
* See HAS_DRAND48_PROTO.
*/
/* Rand_seed_t:
* This symbol defines the type of the argument of the
* random seed function.
*/
/* seedDrand01:
* This symbol defines the macro to be used in seeding the
* random number generator (see Drand01).
*/
/* RANDBITS:
* This symbol indicates how many bits are produced by the
* function used to generate normalized random numbers.
* Values include 15, 16, 31, and 48.
*/
#define Drand01() rand()/(RAND_MAX+1) /**/
#define Rand_seed_t unsigned int /**/
#define seedDrand01(x) srand((Rand_seed_t)x) /**/
#define RANDBITS 15 /**/
/* SELECT_MIN_BITS:
* This symbol holds the minimum number of bits operated by select.
* That is, if you do select(n, ...), how many bits at least will be
* cleared in the masks if some activity is detected. Usually this
* is either n or 32*ceil(n/32), especially many little-endians do
* the latter. This is only useful if you have select(), naturally.
*/
#define SELECT_MIN_BITS 1 /**/
/* Select_fd_set_t:
* This symbol holds the type used for the 2nd, 3rd, and 4th
* arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
* is defined, and 'int *' otherwise. This is only useful if you
* have select(), of course.
*/
#define Select_fd_set_t fd_set * /**/
/* SIG_NAME:
* This symbol contains a list of signal names in order of
* signal number. This is intended
* to be used as a static array initialization, like this:
* char *sig_name[] = { SIG_NAME };
* The signals in the list are separated with commas, and each signal
* is surrounded by double quotes. There is no leading SIG in the signal
* name, i.e. SIGQUIT is known as "QUIT".
* Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
* etc., where nn is the actual signal number (e.g. NUM37).
* The signal number for sig_name[i] is stored in sig_num[i].
* The last element is 0 to terminate the list with a NULL. This
* corresponds to the 0 at the end of the sig_num list.
*/
/* SIG_NUM:
* This symbol contains a list of signal numbers, in the same order as the
* SIG_NAME list. It is suitable for static array initialization, as in:
* int sig_num[] = { SIG_NUM };
* The signals in the list are separated with commas, and the indices
* within that list and the SIG_NAME list match, so it's easy to compute
* the signal name from a number or vice versa at the price of a small
* dynamic linear lookup.
* Duplicates are allowed, but are moved to the end of the list.
* The signal number corresponding to sig_name[i] is sig_number[i].
* if (i < NSIG) then sig_number[i] == i.
* The last element is 0, corresponding to the 0 at the end of
* the sig_name list.
*/
/* SIG_SIZE:
* This variable contains the number of elements of the sig_name
* and sig_num arrays, excluding the final NULL entry.
*/
#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","KILL","PIPE","QUIT","CHLD","CONT","STOP","TSTP","TTIN","TTOU","BUS","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0 /**/
#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,0 /**/
#define SIG_SIZE 31 /**/
/* SITEARCH:
* This symbol contains the name of the private library for this package.
* The library is private in the sense that it needn't be in anyone's
* execution path, but it should be accessible by the world. The program
* should be prepared to do ~ expansion.
* The standard distribution will put nothing in this directory.
* After perl has been installed, users may install their own local
* architecture-dependent modules in this directory with
* MakeMaker Makefile.PL
* or equivalent. See INSTALL for details.
*/
/* SITEARCH_EXP:
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
/*#define SITEARCH "/system/ported/lib/perl5/site_perl/5.8.0/hppa1.1" /**/
/*#define SITEARCH_EXP "/system/ported/lib/perl5/site_perl/5.8.0/hppa1.1" /**/
/* SITELIB:
* This symbol contains the name of the private library for this package.
* The library is private in the sense that it needn't be in anyone's
* execution path, but it should be accessible by the world. The program
* should be prepared to do ~ expansion.
* The standard distribution will put nothing in this directory.
* After perl has been installed, users may install their own local
* architecture-independent modules in this directory with
* MakeMaker Makefile.PL
* or equivalent. See INSTALL for details.
*/
/* SITELIB_EXP:
* This symbol contains the ~name expanded version of SITELIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
/* SITELIB_STEM:
* This define is SITELIB_EXP with any trailing version-specific component
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
#define SITELIB "/system/ported/lib/perl5/site_perl/5.8.0" /**/
#define SITELIB_EXP "/system/ported/lib/perl5/site_perl/5.8.0" /**/
#define SITELIB_STEM "/system/ported/lib/perl5/site_perl" /**/
/* Size_t_size:
* This symbol holds the size of a Size_t in bytes.
*/
#define Size_t_size 4 /* */
/* Size_t:
* This symbol holds the type used to declare length parameters
* for string functions. It is usually size_t, but may be
* unsigned long, int, etc. It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
#define Size_t size_t /* length paramater for string functions */
/* Sock_size_t:
* This symbol holds the type used for the size argument of
* various socket calls (just the base type, not the pointer-to).
*/
#define Sock_size_t int /**/
/* SSize_t:
* This symbol holds the type used by functions that return
* a count of bytes or an error condition. It must be a signed type.
* It is usually ssize_t, but may be long or int, etc.
* It may be necessary to include <sys/types.h> or <unistd.h>
* to get any typedef'ed information.
* We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
*/
#define SSize_t ssize_t /* signed count of bytes */
/* STARTPERL:
* This variable contains the string to put in front of a perl
* script to make sure (one hopes) that it runs with perl and not
* some shell.
*/
#define STARTPERL "!perl.pm" /**/
/* STDCHAR:
* This symbol is defined to be the type of char used in stdio.h.
* It has the values "unsigned char" or "char".
*/
#define STDCHAR unsigned char /**/
/* HAS_STDIO_STREAM_ARRAY:
* This symbol, if defined, tells that there is an array
* holding the stdio streams.
*/
/* STDIO_STREAM_ARRAY:
* This symbol tells the name of the array holding the stdio streams.
* Usual values include _iob, __iob, and __sF.
*/
#define HAS_STDIO_STREAM_ARRAY /**/
#define STDIO_STREAM_ARRAY _iob
/* Uid_t_f:
* This symbol defines the format string used for printing a Uid_t.
*/
#define Uid_t_f "d" /**/
/* Uid_t_sign:
* This symbol holds the signedess of a Uid_t.
* 1 for unsigned, -1 for signed.
*/
#define Uid_t_sign -1 /* UID sign */
/* Uid_t_size:
* This symbol holds the size of a Uid_t in bytes.
*/
#define Uid_t_size 4 /* UID size */
/* Uid_t:
* This symbol holds the type used to declare user ids in the kernel.
* It can be int, ushort, uid_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
#define Uid_t uid_t /* UID type */
/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
* will be employed (be they 32 or 64 bits). The minimal possible
* 64-bitness is used, just enough to get 64-bit integers into Perl.
* This may mean using for example "long longs", while your memory
* may still be limited to 2 gigabytes.
*/
/* USE_64_BIT_ALL:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
* will be used (be they 32 or 64 bits). The maximal possible
* 64-bitness is employed: LP64 or ILP64, meaning that you will
* be able to use more than 2 gigabytes of memory. This mode is
* even more binary incompatible than USE_64_BIT_INT. You may not
* be able to run the resulting executable in a 32-bit CPU at all or
* you may need at least to reboot your OS to 64-bit mode.
*/
#ifndef USE_64_BIT_INT
/*#define USE_64_BIT_INT /**/
#endif
#ifndef USE_64_BIT_ALL
/*#define USE_64_BIT_ALL /**/
#endif
/* USE_LARGE_FILES:
* This symbol, if defined, indicates that large file support
* should be used when available.
*/
#ifndef USE_LARGE_FILES
/*#define USE_LARGE_FILES /**/
#endif
/* USE_LONG_DOUBLE:
* This symbol, if defined, indicates that long doubles should
* be used when available.
*/
#ifndef USE_LONG_DOUBLE
#define USE_LONG_DOUBLE /**/
#endif
/* USE_MORE_BITS:
* This symbol, if defined, indicates that 64-bit interfaces and
* long doubles should be used when available.
*/
#ifndef USE_MORE_BITS
/*#define USE_MORE_BITS /**/
#endif
/* MULTIPLICITY:
* This symbol, if defined, indicates that Perl should
* be built to use multiplicity.
*/
#ifndef MULTIPLICITY
/*#define MULTIPLICITY /**/
#endif
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
* be used throughout. If not defined, stdio should be
* used in a fully backward compatible manner.
*/
#ifndef USE_PERLIO
/*#define USE_PERLIO /**/
#endif
/* USE_SOCKS:
* This symbol, if defined, indicates that Perl should
* be built to use socks.
*/
#ifndef USE_SOCKS
/*#define USE_SOCKS /**/
#endif
/* USE_ITHREADS:
* This symbol, if defined, indicates that Perl should be built to
* use the interpreter-based threading implementation.
*/
/* USE_5005THREADS:
* This symbol, if defined, indicates that Perl should be built to
* use the 5.005-based threading implementation.
*/
/* OLD_PTHREADS_API:
* This symbol, if defined, indicates that Perl should
* be built to use the old draft POSIX threads API.
*/
/* USE_REENTRANT_API:
* This symbol, if defined, indicates that Perl should
* try to use the various _r versions of library functions.
* This is extremely experimental.
*/
/*#define USE_5005THREADS /**/
/*#define USE_ITHREADS /**/
#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
#define USE_THREADS /* until src is revised*/
#endif
/*#define OLD_PTHREADS_API /**/
/*#define USE_REENTRANT_API /**/
/* PERL_VENDORARCH:
* If defined, this symbol contains the name of a private library.
* The library is private in the sense that it needn't be in anyone's
* execution path, but it should be accessible by the world.
* It may have a ~ on the front.
* The standard distribution will put nothing in this directory.
* Vendors who distribute perl may wish to place their own
* architecture-dependent modules and extensions in this directory with
* MakeMaker Makefile.PL INSTALLDIRS=vendor
* or equivalent. See INSTALL for details.
*/
/* PERL_VENDORARCH_EXP:
* This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
#define PERL_VENDORARCH "" /**/
#define PERL_VENDORARCH_EXP "" /**/
/* PERL_VENDORLIB_EXP:
* This symbol contains the ~name expanded version of VENDORLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
/* PERL_VENDORLIB_STEM:
* This define is PERL_VENDORLIB_EXP with any trailing version-specific component
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
#define PERL_VENDORLIB_EXP "" /**/
#define PERL_VENDORLIB_STEM "" /**/
/* VOIDFLAGS:
* This symbol indicates how much support of the void type is given by this
* compiler. What various bits mean:
*
* 1 = supports declaration of void
* 2 = supports arrays of pointers to functions returning void
* 4 = supports comparisons between pointers to void functions and
* addresses of void functions
* 8 = suports declaration of generic void pointers
*
* The package designer should define VOIDUSED to indicate the requirements
* of the package. This can be done either by #defining VOIDUSED before
* including config.h, or by defining defvoidused in Myinit.U. If the
* latter approach is taken, only those flags will be tested. If the
* level of void support necessary is not present, defines void to int.
*/
#ifndef VOIDUSED
#define VOIDUSED 15
#endif
#define VOIDFLAGS 15
#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
#define void int /* is void to be avoided? */
#define M_VOID /* Xenix strikes again */
#endif
/* PERL_XS_APIVERSION:
* This variable contains the version of the oldest perl binary
* compatible with the present perl. perl.c:incpush() and
* lib/lib.pm will automatically search in /system/ported/lib/perl5/site_perl/5.8.0/hppa1.1 for older
* directories across major versions back to xs_apiversion.
* This is only useful if you have a perl library directory tree
* structured like the default one.
* See INSTALL for how this works.
* The versioned site_perl directory was introduced in 5.005,
* so that is the lowest possible value.
* Since this can depend on compile time options
* it is set by Configure. Other non-default sources
* of potential incompatibility, such as multiplicity, threads,
* debugging, 64bits, sfio, etc., are not checked for currently,
* though in principle we could go snooping around in old
* Config.pm files.
*/
/* PERL_PM_APIVERSION:
* This variable contains the version of the oldest perl
* compatible with the present perl. (That is, pure perl modules
* written for pm_apiversion will still work for the current
* version). perl.c:incpush() and lib/lib.pm will automatically
* search in /system/ported/lib/perl5/site_perl/5.8.0 for older directories across major versions
* back to pm_apiversion. This is only useful if you have a perl
* library directory tree structured like the default one. The
* versioned site_perl library was introduced in 5.005, so that's
* the default setting for this variable. It's hard to imagine
* it changing before Perl6. It is included here for symmetry
* with xs_apiveprsion -- the searching algorithms will
* (presumably) be similar.
* See the INSTALL file for how this works.
*/
#define PERL_XS_APIVERSION "5.00563"
#define PERL_PM_APIVERSION "5.005"
/* HAS_CRYPT:
* This symbol, if defined, indicates that the crypt routine is available
* to encrypt passwords and the like.
*/
/*#define HAS_CRYPT /**/
/* SETUID_SCRIPTS_ARE_SECURE_NOW:
* This symbol, if defined, indicates that the bug that prevents
* setuid scripts from being secure is not present in this kernel.
*/
/* DOSUID:
* This symbol, if defined, indicates that the C program should
* check the script that it is executing for setuid/setgid bits, and
* attempt to emulate setuid/setgid on systems that have disabled
* setuid #! scripts because the kernel can't do it securely.
* It is up to the package designer to make sure that this emulation
* is done securely. Among other things, it should do an fstat on
* the script it just opened to make sure it really is a setuid/setgid
* script, it should make sure the arguments passed correspond exactly
* to the argument on the #! line, and it should not trust any
* subprocesses to which it must pass the filename rather than the
* file descriptor of the script to be executed.
*/
#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
/*#define DOSUID /**/
/* Shmat_t:
* This symbol holds the return type of the shmat() system call.
* Usually set to 'void *' or 'char *'.
*/
/* HAS_SHMAT_PROTOTYPE:
* This symbol, if defined, indicates that the sys/shm.h includes
* a prototype for shmat(). Otherwise, it is up to the program to
* guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
* but not always right so it should be emitted by the program only
* when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
#define Shmat_t void * /**/
#define HAS_SHMAT_PROTOTYPE /**/
/* I_NDBM:
* This symbol, if defined, indicates that <ndbm.h> exists and should
* be included.
*/
/*#define I_NDBM /**/
/* I_STDARG:
* This symbol, if defined, indicates that <stdarg.h> exists and should
* be included.
*/
/* I_VARARGS:
* This symbol, if defined, indicates to the C program that it should
* include <varargs.h>.
*/
#define I_STDARG /**/
/*#define I_VARARGS /**/
/* CAN_PROTOTYPE:
* If defined, this macro indicates that the C compiler can handle
* function prototypes.
*/
/* _:
* This macro is used to declare function parameters for folks who want
* to make declarations with prototypes using a different style than
* the above macros. Use double parentheses. For example:
*
* int main _((int argc, char *argv[]));
*/
#define CAN_PROTOTYPE /**/
#ifdef CAN_PROTOTYPE
#define _(args) args
#else
#define _(args) ()
#endif
/* SH_PATH:
* This symbol contains the full pathname to the shell used on this
* on this system to execute Bourne shell scripts. Usually, this will be
* /bin/sh, though it's possible that some systems will have /bin/ksh,
* /bin/pdksh, /bin/ash, /bin/bash, or even something such as
* D:/bin/sh.exe.
*/
#define SH_PATH "/bin/sh" /**/
/* USE_CROSS_COMPILE:
* This symbol, if defined, indicates that Perl is being cross-compiled.
*/
/* PERL_TARGETARCH:
* This symbol, if defined, indicates the target architecture
* Perl has been cross-compiled to. Undefined if not a cross-compile.
*/
#ifndef USE_CROSS_COMPILE
/*#define USE_CROSS_COMPILE /**/
#define PERL_TARGETARCH "undef" /**/
#endif
/* HAS_DBMINIT_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the dbminit() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern int dbminit(char *);
*/
/*#define HAS_DBMINIT_PROTO /**/
/* HAS_DIRFD:
* This manifest constant lets the C program know that dirfd
* is available.
*/
/*#define HAS_DIRFD /**/
/* HAS_FLOCK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the flock() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern int flock(int, int);
*/
/*#define HAS_FLOCK_PROTO /**/
/* HAS_FPCLASSL:
* This symbol, if defined, indicates that the fpclassl routine is
* available to classify long doubles. Available for example in IRIX.
* The returned values are defined in <ieeefp.h> and are:
*
* FP_SNAN signaling NaN
* FP_QNAN quiet NaN
* FP_NINF negative infinity
* FP_PINF positive infinity
* FP_NDENORM negative denormalized non-zero
* FP_PDENORM positive denormalized non-zero
* FP_NZERO negative zero
* FP_PZERO positive zero
* FP_NNORM negative normalized non-zero
* FP_PNORM positive normalized non-zero
*/
/*#define HAS_FPCLASSL /**/
/* HAS_NL_LANGINFO:
* This symbol, if defined, indicates that the nl_langinfo routine is
* available to return local data. You will also need <langinfo.h>
* and therefore I_LANGINFO.
*/
/*#define HAS_NL_LANGINFO /**/
/* HAS_PROCSELFEXE:
* This symbol is defined if PROCSELFEXE_PATH is a symlink
* to the absolute pathname of the executing program.
*/
/* PROCSELFEXE_PATH:
* If HAS_PROCSELFEXE is defined this symbol is the filename
* of the symbolic link pointing to the absolute pathname of
* the executing program.
*/
/*#define HAS_PROCSELFEXE /**/
#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
#define PROCSELFEXE_PATH /**/
#endif
/* HAS_SIGPROCMASK:
* This symbol, if defined, indicates that the sigprocmask
* system call is available to examine or change the signal mask
* of the calling process.
*/
/*#define HAS_SIGPROCMASK /**/
/* HAS_SOCKATMARK:
* This symbol, if defined, indicates that the sockatmark routine is
* available to test whether a socket is at the out-of-band mark.
*/
/*#define HAS_SOCKATMARK /**/
/* HAS_SOCKATMARK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the sockatmark() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern int sockatmark(int);
*/
/*#define HAS_SOCKATMARK_PROTO /**/
/* HAS_SETRESGID_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the setresgid() function. Otherwise, it is up
* to the program to supply one. Good guesses are
* extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
*/
/*#define HAS_SETRESGID_PROTO /**/
/* HAS_SETRESUID_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the setresuid() function. Otherwise, it is up
* to the program to supply one. Good guesses are
* extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
*/
/*#define HAS_SETRESUID_PROTO /**/
/* HAS_STRFTIME:
* This symbol, if defined, indicates that the strftime routine is
* available to do time formatting.
*/
#define HAS_STRFTIME /**/
/* HAS_SYSCALL_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the syscall() function. Otherwise, it is up
* to the program to supply one. Good guesses are
* extern int syscall(int, ...);
* extern int syscall(long, ...);
*/
/*#define HAS_SYSCALL_PROTO /**/
/* U32_ALIGNMENT_REQUIRED:
* This symbol, if defined, indicates that you must access
* character data through U32-aligned pointers.
*/
#ifndef U32_ALIGNMENT_REQUIRED
#define U32_ALIGNMENT_REQUIRED /**/
#endif
/* HAS_USLEEP_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the usleep() function. Otherwise, it is up
* to the program to supply one. A good guess is
* extern int usleep(useconds_t);
*/
/*#define HAS_USLEEP_PROTO /**/
/* I_CRYPT:
* This symbol, if defined, indicates that <crypt.h> exists and
* should be included.
*/
/*#define I_CRYPT /**/
/* I_FP:
* This symbol, if defined, indicates that <fp.h> exists and
* should be included.
*/
/*#define I_FP /**/
/* I_LANGINFO:
* This symbol, if defined, indicates that <langinfo.h> exists and
* should be included.
*/
/*#define I_LANGINFO /**/
/* HAS_CTERMID_R:
* This symbol, if defined, indicates that the ctermid_r routine
* is available to ctermid re-entrantly.
*/
/* CTERMID_R_PROTO:
* This symbol encodes the prototype of ctermid_r.
* It is zero if d_ctermid_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r
* is defined.
*/
/*#define HAS_CTERMID_R /**/
#define CTERMID_R_PROTO 0 /**/
/* HAS_ENDHOSTENT_R:
* This symbol, if defined, indicates that the endhostent_r routine
* is available to endhostent re-entrantly.
*/
/* ENDHOSTENT_R_PROTO:
* This symbol encodes the prototype of endhostent_r.
* It is zero if d_endhostent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r
* is defined.
*/
/*#define HAS_ENDHOSTENT_R /**/
#define ENDHOSTENT_R_PROTO 0 /**/
/* HAS_ENDNETENT_R:
* This symbol, if defined, indicates that the endnetent_r routine
* is available to endnetent re-entrantly.
*/
/* ENDNETENT_R_PROTO:
* This symbol encodes the prototype of endnetent_r.
* It is zero if d_endnetent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r
* is defined.
*/
/*#define HAS_ENDNETENT_R /**/
#define ENDNETENT_R_PROTO 0 /**/
/* HAS_ENDPROTOENT_R:
* This symbol, if defined, indicates that the endprotoent_r routine
* is available to endprotoent re-entrantly.
*/
/* ENDPROTOENT_R_PROTO:
* This symbol encodes the prototype of endprotoent_r.
* It is zero if d_endprotoent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r
* is defined.
*/
/*#define HAS_ENDPROTOENT_R /**/
#define ENDPROTOENT_R_PROTO 0 /**/
/* HAS_ENDSERVENT_R:
* This symbol, if defined, indicates that the endservent_r routine
* is available to endservent re-entrantly.
*/
/* ENDSERVENT_R_PROTO:
* This symbol encodes the prototype of endservent_r.
* It is zero if d_endservent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r
* is defined.
*/
/*#define HAS_ENDSERVENT_R /**/
#define ENDSERVENT_R_PROTO 0 /**/
/* HAS_GETHOSTBYADDR_R:
* This symbol, if defined, indicates that the gethostbyaddr_r routine
* is available to gethostbyaddr re-entrantly.
*/
/* GETHOSTBYADDR_R_PROTO:
* This symbol encodes the prototype of gethostbyaddr_r.
* It is zero if d_gethostbyaddr_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r
* is defined.
*/
/*#define HAS_GETHOSTBYADDR_R /**/
#define GETHOSTBYADDR_R_PROTO 0 /**/
/* HAS_GETHOSTBYNAME_R:
* This symbol, if defined, indicates that the gethostbyname_r routine
* is available to gethostbyname re-entrantly.
*/
/* GETHOSTBYNAME_R_PROTO:
* This symbol encodes the prototype of gethostbyname_r.
* It is zero if d_gethostbyname_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r
* is defined.
*/
/*#define HAS_GETHOSTBYNAME_R /**/
#define GETHOSTBYNAME_R_PROTO 0 /**/
/* HAS_GETHOSTENT_R:
* This symbol, if defined, indicates that the gethostent_r routine
* is available to gethostent re-entrantly.
*/
/* GETHOSTENT_R_PROTO:
* This symbol encodes the prototype of gethostent_r.
* It is zero if d_gethostent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r
* is defined.
*/
/*#define HAS_GETHOSTENT_R /**/
#define GETHOSTENT_R_PROTO 0 /**/
/* HAS_GETNETBYADDR_R:
* This symbol, if defined, indicates that the getnetbyaddr_r routine
* is available to getnetbyaddr re-entrantly.
*/
/* GETNETBYADDR_R_PROTO:
* This symbol encodes the prototype of getnetbyaddr_r.
* It is zero if d_getnetbyaddr_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r
* is defined.
*/
/*#define HAS_GETNETBYADDR_R /**/
#define GETNETBYADDR_R_PROTO 0 /**/
/* HAS_GETNETBYNAME_R:
* This symbol, if defined, indicates that the getnetbyname_r routine
* is available to getnetbyname re-entrantly.
*/
/* GETNETBYNAME_R_PROTO:
* This symbol encodes the prototype of getnetbyname_r.
* It is zero if d_getnetbyname_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r
* is defined.
*/
/*#define HAS_GETNETBYNAME_R /**/
#define GETNETBYNAME_R_PROTO 0 /**/
/* HAS_GETNETENT_R:
* This symbol, if defined, indicates that the getnetent_r routine
* is available to getnetent re-entrantly.
*/
/* GETNETENT_R_PROTO:
* This symbol encodes the prototype of getnetent_r.
* It is zero if d_getnetent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r
* is defined.
*/
/*#define HAS_GETNETENT_R /**/
#define GETNETENT_R_PROTO 0 /**/
/* HAS_GETPROTOBYNAME_R:
* This symbol, if defined, indicates that the getprotobyname_r routine
* is available to getprotobyname re-entrantly.
*/
/* GETPROTOBYNAME_R_PROTO:
* This symbol encodes the prototype of getprotobyname_r.
* It is zero if d_getprotobyname_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r
* is defined.
*/
/*#define HAS_GETPROTOBYNAME_R /**/
#define GETPROTOBYNAME_R_PROTO 0 /**/
/* HAS_GETPROTOBYNUMBER_R:
* This symbol, if defined, indicates that the getprotobynumber_r routine
* is available to getprotobynumber re-entrantly.
*/
/* GETPROTOBYNUMBER_R_PROTO:
* This symbol encodes the prototype of getprotobynumber_r.
* It is zero if d_getprotobynumber_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r
* is defined.
*/
/*#define HAS_GETPROTOBYNUMBER_R /**/
#define GETPROTOBYNUMBER_R_PROTO 0 /**/
/* HAS_GETPROTOENT_R:
* This symbol, if defined, indicates that the getprotoent_r routine
* is available to getprotoent re-entrantly.
*/
/* GETPROTOENT_R_PROTO:
* This symbol encodes the prototype of getprotoent_r.
* It is zero if d_getprotoent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r
* is defined.
*/
/*#define HAS_GETPROTOENT_R /**/
#define GETPROTOENT_R_PROTO 0 /**/
/* HAS_GETSERVBYNAME_R:
* This symbol, if defined, indicates that the getservbyname_r routine
* is available to getservbyname re-entrantly.
*/
/* GETSERVBYNAME_R_PROTO:
* This symbol encodes the prototype of getservbyname_r.
* It is zero if d_getservbyname_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r
* is defined.
*/
/*#define HAS_GETSERVBYNAME_R /**/
#define GETSERVBYNAME_R_PROTO 0 /**/
/* HAS_GETSERVBYPORT_R:
* This symbol, if defined, indicates that the getservbyport_r routine
* is available to getservbyport re-entrantly.
*/
/* GETSERVBYPORT_R_PROTO:
* This symbol encodes the prototype of getservbyport_r.
* It is zero if d_getservbyport_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r
* is defined.
*/
/*#define HAS_GETSERVBYPORT_R /**/
#define GETSERVBYPORT_R_PROTO 0 /**/
/* HAS_GETSERVENT_R:
* This symbol, if defined, indicates that the getservent_r routine
* is available to getservent re-entrantly.
*/
/* GETSERVENT_R_PROTO:
* This symbol encodes the prototype of getservent_r.
* It is zero if d_getservent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
* is defined.
*/
/*#define HAS_GETSERVENT_R /**/
#define GETSERVENT_R_PROTO 0 /**/
/* HAS_PTHREAD_ATFORK:
* This symbol, if defined, indicates that the pthread_atfork routine
* is available setup fork handlers.
*/
/*#define HAS_PTHREAD_ATFORK /**/
/* HAS_READDIR64_R:
* This symbol, if defined, indicates that the readdir64_r routine
* is available to readdir64 re-entrantly.
*/
/* READDIR64_R_PROTO:
* This symbol encodes the prototype of readdir64_r.
* It is zero if d_readdir64_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r
* is defined.
*/
/*#define HAS_READDIR64_R /**/
#define READDIR64_R_PROTO 0 /**/
/* HAS_SETHOSTENT_R:
* This symbol, if defined, indicates that the sethostent_r routine
* is available to sethostent re-entrantly.
*/
/* SETHOSTENT_R_PROTO:
* This symbol encodes the prototype of sethostent_r.
* It is zero if d_sethostent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r
* is defined.
*/
/*#define HAS_SETHOSTENT_R /**/
#define SETHOSTENT_R_PROTO 0 /**/
/* HAS_SETLOCALE_R:
* This symbol, if defined, indicates that the setlocale_r routine
* is available to setlocale re-entrantly.
*/
/* SETLOCALE_R_PROTO:
* This symbol encodes the prototype of setlocale_r.
* It is zero if d_setlocale_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r
* is defined.
*/
/*#define HAS_SETLOCALE_R /**/
#define SETLOCALE_R_PROTO 0 /**/
/* HAS_SETNETENT_R:
* This symbol, if defined, indicates that the setnetent_r routine
* is available to setnetent re-entrantly.
*/
/* SETNETENT_R_PROTO:
* This symbol encodes the prototype of setnetent_r.
* It is zero if d_setnetent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r
* is defined.
*/
/*#define HAS_SETNETENT_R /**/
#define SETNETENT_R_PROTO 0 /**/
/* HAS_SETPROTOENT_R:
* This symbol, if defined, indicates that the setprotoent_r routine
* is available to setprotoent re-entrantly.
*/
/* SETPROTOENT_R_PROTO:
* This symbol encodes the prototype of setprotoent_r.
* It is zero if d_setprotoent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r
* is defined.
*/
/*#define HAS_SETPROTOENT_R /**/
#define SETPROTOENT_R_PROTO 0 /**/
/* HAS_SETSERVENT_R:
* This symbol, if defined, indicates that the setservent_r routine
* is available to setservent re-entrantly.
*/
/* SETSERVENT_R_PROTO:
* This symbol encodes the prototype of setservent_r.
* It is zero if d_setservent_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r
* is defined.
*/
/*#define HAS_SETSERVENT_R /**/
#define SETSERVENT_R_PROTO 0 /**/
/* HAS_TTYNAME_R:
* This symbol, if defined, indicates that the ttyname_r routine
* is available to ttyname re-entrantly.
*/
/* TTYNAME_R_PROTO:
* This symbol encodes the prototype of ttyname_r.
* It is zero if d_ttyname_r is undef, and one of the
* REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r
* is defined.
*/
/*#define HAS_TTYNAME_R /**/
#define TTYNAME_R_PROTO 0 /**/
#endif
|
