Sat Mar 14 08:48:56 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* Kpathsea 3.2, Web2C 7.2, etc.
Wed Mar 11 19:30:11 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* config.guess: Update (via Thomas).
* Makefile.in (distclean): Do disabled directories as well.
Tue Mar 10 22:08:06 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* Makefile.in: Changes for selective disabling of compilation.
Partly from Thomas Esser.
(info,dvi,check,depend,*clean,install*): Fail make if a recursive make
fails. From Thomas Esser.
* configure.in: Add the --without-* options. Partly from Thomas
Esser.
* withenable.ac: New file, make selective disabling of compilation
of components possible. Partly from Thomas Esser.
Wed Mar 4 09:08:36 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* etc/autoconf/acsite.m4: Make some test $a = b forms more robust.
* etc/autoconf/acgeneral.m4: Some more changes in the handling of
ac_include.
Tue Mar 3 10:05:04 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* etc/autoconf/acgeneral.m4: Use commas as sed substitution
delimiters in the implementation of ac_include, to lessen the need
to escape characters.
Mon Feb 16 10:04:53 1998 Olaf Weber <olaf@infovore.xs4all.nl>
* configure.in: Configure in tetex directory.
* Makefile.in: Add tetex directory to programs.
* etc/autoconf/acgeneral.m4: In the implementation of ac_include,
avoid the \x<pattern>x feature of sed, which is not universally
supported. This appears to solve the problems NeXT(step) users
had to configure Web2C.
Tue Feb 3 22:14:37 1998 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Add a few more packages to programs variable.
* configure.in: Add a few more packages to AC_CONFIG_SUBDIRS.
Fri Jan 23 15:10:56 1998 Olaf Weber <infovore@xs4all.nl>
* configure.in: Add oxdvi to AC_CONFIG_SUBDIRS.
* Makefile.in: Add oxdvi to programs.
Thu Jan 8 20:00:23 1998 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acspecific.m4: Disable [] quote characters before
defining an array in C code.
Tue Jan 6 14:27:54 1998 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acgeneral.m4 (AC_CONFIG_HEADER): Quote
AC_LIST_HEADER to allow it to be redefined. From Peter
Breitenlohner.
Tue Dec 30 17:53:18 1997 Olaf Weber <infovore@xs4all.nl>
* configure.in: Add seetexk, tex4htk to programs.
* Makefile.in: Add seetexk, tex4htk to programs.
Thu Dec 18 20:41:52 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acspecific.m4: Correction for the yytext tests: lex
must be called for each of them.
* etc/autoconf/acgeneral.m4: In check for configure, look first in
current dir, just in case someone put a patched version of the
script there.
Tue Dec 16 18:49:13 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acgeneral.m4: Change the ordering of some sed
expressions, to prevent colons in $ac_given_srcdir from being
expanded.
Mon Dec 15 15:22:33 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acspecific.m4: Make MS-DOS a special case in the
'ln -s' test.
Fri Dec 12 10:52:37 1997 Olaf Weber <infovore@xs4all.nl>
* klibtool: Keep temp files within 8.3 limit.
Wed Dec 3 17:46:53 1997 Olaf Weber <infovore@xs4all.nl>
* configure.in: Add gsftopk to AC_CONFIG_SUBDIRS.
* Makefile.in: Add gsftopk to programs.
Tue Dec 2 21:11:41 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acgeneral.m4: Changes to the ac_include
implementation, so that sed read commands are generated only for
those files actually present.
Sun Nov 23 14:18:37 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acspecific.m4: Another test for executables
adapated for MS-DOS.
Wed Nov 19 17:39:53 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acgeneral.m4: Numerous changes to support
generation of configure scripts that run on MS-DOS.
* Makefile.in [programs]: Remove omega and libwww; the first never
occurs, xdvik is responsible for the second.
(config.status): Ensure that --enable-maintainer-mode is retained if
the configure files are run again.
* configure.in: Remove omega from the AC_CONFIG_SUBDIRS list,
because it will never occur.
* klibtool: Some support for working undr MS-DOS. From Eli
Zaretskii.
* etc/autoconf/acsite.m4: Improve formatting of
--enable-maintainer-mode help message.
Fri Nov 14 00:24:23 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in [programs]: Add omega, odvipsk, ps2pkm, makeindexk,
libwww.
* configure.in (AC_CONFIG_SUBDIRS): Add omega, odvipsk, ps2pkm,
makeindexk, libwww.
Thu Nov 13 20:23:06 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acconfig.h [WORDS_BIGENDIAN]: Since the special
NeXT stuff proved troublesome, it has been removed again.
Thu Nov 6 11:48:40 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acconfig.h [WORDS_BIGENDIAN]: support NeXT's FAT
binaries.
Tue Nov 4 19:09:16 1997 Olaf Weber <infovore@xs4all.nl>
* configure.in: Add a test to ensure that autoconf 2.12.1 -- the
one with our own hacks -- is used. This is possible now that we
have gotten rid of the 'a' in the version number.
Fri Oct 31 12:38:10 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acgeneral.m4: Changed version number from 2.12a to
2.12.1 because the former caused problems.
Tue Oct 28 22:34:09 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acspecific.m4: Include -Wl,-rpath,$x_libraries for
IRIX systems, on the off chance that these are self-compiled.
From Andreas Schott <ays@rzg.mpg.de>.
Wed Oct 22 20:26:19 1997 Olaf Weber <infovore@xs4all.nl>
* klibtool: Only rewrite the klibtool.config file if its contents
changed. After Peter Breitenlohner.
Thu Oct 16 09:57:01 1997 Olaf Weber <infovore@xs4all.nl>
* etc/autoconf/acsite.m4: Typo: kbAC_LIBTOOL_REPLACE_FUNCS ->
kb_AC_LIBTOOL_REPLACE_FUNCS.
* klibtool: Remove $lib_base before trying to creating it as a
symlink. From Peter Breitenlohner.
Fri Oct 3 09:49:28 1997 Olaf Weber <infovore@xs4all.nl>
* acklibtool.m4: --disable-static implies --enable-shared.
From Karl Berry.
* klibtool: Add support for shared libraries on irix5/irix6.
Wed Oct 1 18:12:28 1997 Olaf Weber <infovore@xs4all.nl>
* Replace mkdirchain with mkinstalldirs (from libtool-1.0).
Tue Sep 30 10:46:27 1997 Olaf Weber <infovore@xs4all.nl>
* Added add-info-toc script, from Karl Berry.
* etc/autoconf/acgeneral.m4: Change ac_dB to match up to
end-of-line. This fixes the case where the VALUE contains spaces.
* etc/autoconf/acconfig.h: Add definitions to make autoheader
happy: YYTEXT_CHAR, YYTEXT_UCHAR.
* etc/autoconf/acspecific.m4: Add case for determining whether
yytext is array of unsigned char. (From Thomas Esser
<te@informatik.uni-hannover.de>)
* mkdirchain: Do not assume the argument begins with a slash
(invalid on MS-DOS and related systems, as well as for relative
paths).
Tue Sep 16 17:42:59 1997 Olaf Weber <infovore@xs4all.nl>
* Makefile.in: Changed ac_dir to $(srcdir)/etc/autoconf, where we
have a full set of macro files.
* acklibtool.m4: Added support from klibtool --source-dir option.
* klibtool: Added --source-dir option, after suggestion by
"Jonathan I. Kamens" <jik@cam.ov.com>
Thu Feb 6 17:33:11 1997 Karl Berry <karl@cs.umb.edu>
* Kpathsea 3.0, Web2c 7.0, etc.
Fri Jan 31 16:20:23 1997 Karl Berry <karl@cs.umb.edu>
* configure (yytext test): Only define yywrap if it's not #defined.
Reported by Wayne for HP-UX.
Thu Jan 16 17:56:29 1997 Karl Berry <karl@cs.umb.edu>
* install-sh, config.guess, config.sub: New versions from /gd/gnu/lib.
Thu Sep 5 19:07:41 1996 Karl Berry <karl@cs.umb.edu>
* configure.in: Include acklibtool.m4 here for the sake of getting the
--with and --enable options.
Sat Jul 27 14:36:26 1996 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (kbAC_LIBTOOL_REPLACE_FUNCS): New test.
Sun Apr 28 15:24:19 1996 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (pb_AC_ASM_UNDERSCORE): New test.
From: Peter Breitenlohner <peb@MPPMU.MPG.DE>.
Tue Mar 12 15:28:42 1996 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (sharedlib): Oops, hp700 is SHLIB_PATH, not SHLIB.
Sat Feb 10 14:41:39 1996 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (SunOS*5): Use -Kpic rather than -K pic.
Also, set up sharedlib_postlink.
From: pete@thi.informatik.uni-frankfurt.de (Peter Dyballa).
Tue Dec 26 15:57:32 1995 Karl Berry <karl@cs.umb.edu>
* configure.in: Add all --with and --enable options here, so
configure --help will show them.
Fri Dec 15 20:16:08 1995 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (kb_AC_SYS_SHAREDLIB): Don't use $(sharedlib) as a
-soname target for linux, etc.
From: Thomas Peikenkamp <Thomas.Peikenkamp@arbi.informatik.uni-oldenburg.de>.
Wed Dec 13 12:57:38 1995 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (kb_AC_SYS_SHAREDLIB): Turn everything off if shared
libraries aren't supported on this system. Check for Elf under
Linux -- that's all we can support.
Sun Dec 10 14:58:08 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (install-man, install-manpages): Remove these
top-level targets; we should have install-doc, if anything.
(mptriptrap): Back to just triptrap. Suggested by Ulrik.
Tue Nov 21 17:26:41 1995 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (kb_AC_SYS_SHAREDLIB) [HPUX] : Set sharedlib_linkflags
to -Wl,+s.
Sat Nov 18 16:47:18 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (installargs): Do not pass down INSTALL, since then
install-sh is found in the wrong place.
* Update for Autoconf 2.5.
Fri Nov 17 15:31:25 1995 Karl Berry <karl@cs.umb.edu>
* Use Autoconf 2.4.2.
* Makefile.in (AC_SYS_SHAREDLIB): Rename to kb_AC_...
Change sharedlib_postinstall to be the complete command.
In IRIX case, make symlink without the version number. (From Simon.)
Thu Nov 16 16:49:22 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (installargs): No need to pass transform, we don't
use that.
(install-bases, install-mems, bases, mems): New targets.
Mon Oct 30 17:11:51 1995 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (AC_PATH_XTRA): Note that the Pyramis dcosx needs
-lnsl also. From chad@anasazi.com.
Also, use AC_DEFINE for X_DISPLAY_MISSING, rather than adding it
to X_CFLAGS, to try to keep command lines clean.
Sun Oct 22 16:50:24 1995 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (sharedlib_envvar): New subst variable.
Fri Sep 8 19:24:11 1995 Karl Berry <karl@cs.umb.edu>
* acsite.m4 (AC_REPLACE_FUNCS): Define HAVE_FUNC if we do have the
func.
Sun Aug 20 14:46:39 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (TAGS): Generate a single TAGS file here.
Suggestion from: Greg McGary <gkm@magilla.cichlid.com>.
* configure.in: Do AC_ISC_POSIX.
From: <uddeborg@carmen.se>.
Wed Jul 19 15:38:29 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (*tr[ia]p*): Get rid of everything but `trip' and
`trap' themselves, as this has been vastly simplified.
Tue Apr 25 15:53:34 1995 Karl Berry <karl@cs.umb.edu>
* Update for Autoconf 2.3.
Sun Jan 8 12:16:15 1995 Karl Berry <karl@cs.umb.edu>
* kpathsea 2.6/dviljk 2.5/dvipsk 5.58f/xdvik 18f.
Fri Jan 6 09:05:42 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in (programs): Add gsftopkk.
Wed Jan 4 11:55:48 1995 Karl Berry <karl@cs.umb.edu>
* Makefile.in: Use if ... instead of ||, for Ultrix make.
Sun Jan 1 14:12:04 1995 Karl Berry <karl@cs.umb.edu>
* configure.in (AC_PROG_{CC,MAKE_SET}): Call these.
* Makefile.in: Include make/common.make instead of repeating most
of it.
Sat Dec 31 17:47:46 1994 Karl Berry <karl@cs.umb.edu>
* Makefile.in (install, install-data, install-exec): Just run the
same target in kpathsea.
Sat Dec 24 15:09:55 1994 Karl Berry <karl@cs.umb.edu>
* Makefile.in (CFLAGS): USe @CFLAGS@ instead of -g. From
wls@astro.umd.edu.
({dist,real}clean): Remove config.{cache,log}. From
interran@uluru.Stanford.EDU (John Interrante) and others.
Wed Dec 14 15:17:23 1994 Karl Berry <karl@cs.umb.edu>
* kpathsea 2.5/dviljk 2.4/dvipsk 5.58e/xdvik 18e.
Tue Nov 15 16:19:18 1994 Karl Berry <karl@cs.umb.edu>
* Makefile.in (makeargs): Change MAKEARGS to XMAKEARGS.
Mon Nov 7 15:40:53 1994 Karl Berry <karl@cs.umb.edu>
* configure.in: Use AC_CONFIG_SUBDIRS instead of our handcrafted
version.
Sun Nov 6 16:11:38 1994 Karl Berry <karl@cs.umb.edu>
* configure.in: Run autoupdate.
Tue Oct 25 17:48:02 1994 Karl Berry <karl@cs.umb.edu>
* kpathsea 2.3/dviljk 2.3/dvipsk 5.58c/xdvik 18d.
Fri Oct 14 10:31:35 1994 Karl Berry <karl@cs.umb.edu>
* kpathsea 2.2/dviljk 2.2/dvipsk 5.58b/xdvik 18c.
Sun Sep 25 16:38:59 1994 Karl Berry <karl@cs.umb.edu>
* Makefile.in (makeargs): Add MAKEARGS here.
Mon Sep 12 11:05:53 1994 Karl Berry (karl@cs.umb.edu)
* kpathsea 2.1/dviljk 2.1/dvipsk 5.58a/xdvik 18b.
Sun Sep 11 14:44:05 1994 Karl Berry (karl@cs.umb.edu)
* aclocal.m4: New file with my AC_FIND_XTRA replacement; use -lICE
when linking for -lSM.
Sat Sep 10 14:01:54 1994 Karl Berry (karl@cs.umb.edu)
* configure.in: Use AC_PROG_INSTALL.
* Makefile.in (makeargs): Don't pass SHELL.
Wed Sep 7 16:29:05 1994 Karl Berry (karl@cs.umb.edu)
* kpathsea 2.0/dviljk 2.0/dvipsk 5.55b/xdvik 18a.
Sat Sep 3 07:43:19 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-kpathsea): Use $(MAKE) $(installargs).
(install*): Use installargs.
(installargs): New variable.
(install-exec): Do not depend on install-kpathsea.
* configure.in: chmod a+x kpathsea/config.status.
Fri Sep 2 13:09:16 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (default): Make this the default target, not all.
Sat Aug 27 18:58:01 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-{fmts,bases}): New web2c-only targets.
Fri Aug 26 10:40:22 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (install-kpathsea): New target. Split up install*
and uninstall* targets, so the former depend on it.
Sun Aug 21 12:11:15 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (all, install, etc.): use test ! -d ||, instead of
if, for brevity.
Use ac_include where possible.
Thu Mar 24 08:40:05 1994 Karl Berry (karl@cs.umb.edu)
* configure.in: Exit if configure fails.
Tue Mar 22 08:27:24 1994 Karl Berry (karl@cs.umb.edu)
* configure.in: Don't replace `xdvik/' with `kpathsea/' when
making kpathsea/config.status.
Thu Mar 10 08:03:51 1994 Karl Berry (karl@cs.umb.edu)
* configure.in: Use ../ to get to subdir only if srcdir=.
Thu Feb 24 13:54:36 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (programs): Add dviljk.
(makeargs): Pass install_fonts and {bh,cg,mt}_fontdir down.
Mon Feb 21 13:32:30 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in (triptrap ...): Defpend on do-kpathsea, to help
propagate the paths. From Martyn.
* configure.in: Merge srcdir ==/!= . cases.
Also: Change all $first_program's to `kpathsea'.
mkdir kpathsea before copying.
From simon.
Tue Feb 1 10:32:26 1994 Karl Berry (karl@cs.umb.edu)
* configure.in: Allow for non-. srcdirs. From Andreas.
* Makefile.in (makeargs): Pass scriptdir, texmf_prefix, fontdir,
fmtdir, and basedir; and don't pass (the nonexistent) tex_prefix,
mf_prefix, and texfontdir. From Andreas.
* Makefile.in (CFLAGS): Define this.
(makeargs): Pass it down.
Fri Jan 21 07:42:45 1994 Karl Berry (karl@cs.umb.edu)
* Makefile.in: (makeargs): Pass psmacrodir and default_texsize.
From Martyn.
Sun Dec 19 17:31:54 1993 Karl Berry (karl@cs.umb.edu)
* configure.in: rm -f conftest.stat.
Wed Dec 15 06:30:17 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (fmts): New web2c-only target.
Sun Dec 5 13:49:11 1993 Karl Berry (karl@cs.umb.edu)
* configure.in: Rewrite kpathsea/config.status to only create a
Makefile and c-auto.h, instead of just doing the assignment on the
command line when we configure.
* configure.in (CONFIG_SHELL): Use this instead of $shell, and
allow the user to override.
Sat Dec 4 11:26:09 1993 Karl Berry (karl@cs.umb.edu)
* configure.in: Echo value of srcdir in error msg.
* Makefile.in (triptrap, etc.): New targets for web2c.
Fri Oct 22 13:31:18 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (makeargs): Don't pass the paths, since they're in
paths.h.in now. But do pass the dvips directories.
* configure.in: Makefile.in is in srcdir. From simon@lia.di.epfl.ch.
Thu Sep 30 14:27:17 1993 Karl Berry (karl@cs.umb.edu)
* Makefile.in (*install*): Only do program directories.
(most targets): Add `else true' for stupid sh's.
* README: Update appropriately.
|
