This is Info file dvips.info, produced by Makeinfo version 1.68 from
the input file dvips.texi.
INFO-DIR-SECTION TeX
START-INFO-DIR-ENTRY
* DVI-to-Postscript: (dvips). Translating TeX DVI files to PostScript.
* afm2tfm: (dvips)Invoking afm2tfm. Making Type 1 fonts available to TeX.
* dvips: (dvips)Invoking Dvips. DVI-to-PostScript translator.
END-INFO-DIR-ENTRY
File: dvips.info, Node: Color device configuration, Next: Color support details, Prev: Ted Turner, Up: Color
Color device configuration
==========================
To configure Dvips for a particular color device you need to fine tune
the color parameters to match your device's color rendition. To do
this, you will need a Pantone chart for your device. The header file
`color.lpro' shows a (rough) correspondence between the Crayola crayon
names and the Pantone numbers and also defines default CMYK values for
each of the colors. Note that these colors must be defined in CMYK
terms and not RGB, as Dvips outputs PostScript color commands in CMYK.
This header file also defines (if they are not known to the
interpreter) the PostScript commands `setcmykcolor' and
`currentcmykcolor' in terms of a RGB equivalent so if your device only
understands RGB, there should be no problem.
The parameters set in this file were determined by comparing the
Pantone chart of a Tektronix Phaser printer with the actual Crayola
Crayons. Because these were defined for a particular device, the
actual color rendition on your device may be very different. There are
two ways to adjust this. One is to use the PAntone chart for your
device to rewrite `color.lpro' prior to compilation and installation.
A better alternative, which supports multiple devices, is to add a
header file option in the configuration file (*note Configuration file
commands::.) for each device that defines, in `userdict', the color
parameters for those colors that need redefining.
For example, if you need to change the parameters defining
`Goldenrod' (approximately Pantone 109 on the Phaser) for your device
`mycolordev', do the following. In the Pantone chart for your device,
find the CMYK values for Pantone 109. Let's say they are `{\ 0 0.10
0.75 0.03 }'. Then create a header file named `mycolordev.pro' with the
commands
userdict begin
/Goldenrod { 0 0.10 0.75 0.03 setcmykcolor} bind def
Finally, in `config.mycolordev' add the line
h mycolordev.pro
This will then define `Goldenrod' in your device's CMYK values in
`userdict' which is checked before defining it in `TeXdict' by
`color.pro'. (On MS-DOS, you will have to call this file
`mycolordev.cfg'.)
This mechanism, together with additions to `colordvi.tex' and
`blackdvi.tex' (and the `.sty' files), can also be used to predefine
other colors for your users.
File: dvips.info, Node: Color support details, Prev: Color device configuration, Up: Color
Color support details
=====================
To support color, Dvips recognizes a certain set of specials. These
specials start with the keyword `color' or the keyword `background',
followed by a color specification.
* Menu:
* Color specifications::
* Color specials::
File: dvips.info, Node: Color specifications, Next: Color specials, Up: Color support details
Color specifications
--------------------
What is a color specification? One of three things. First, it might
be a PostScript procedure as defined in a PostScript header file. The
`color.pro' file defines 64 of these, including `Maroon'. This
PostScript procedure must set the current color to be some value; in
this case, `Maroon' is defined as `0 0.87 0.68 0.32 setcmykcolor'.
The second possibility is the name of a color model (initially, one of
`rgb', `hsb', `cmyk', or `gray') followed by the appropriate number of
parameters. When Dvips encounters such a macro, it sends out the
parameters first, followed by the string created by prefixing
`TeXcolor' to the color model. Thus, the color specification `rgb 0.3
0.4 0.5' would generate the PostScript code `0.3 0.4 0.5 TeXrgbcolor'.
Note that the case of zero arguments is disallowed, as that is handled
by the single keyword case (`Maroon') above, where no changes to the
name are made before it is sent to the PostScript file.
The third and final type of color specification is a double quote
followed by any sequence of PostScript. The double quote is stripped
from the output. For instance, the color specification `"AggiePattern
setpattern' will set the `color' to the Aggie logo pattern (assuming
such exists.)
File: dvips.info, Node: Color specials, Prev: Color specifications, Up: Color support details
Color specials
--------------
We will describe `background' first, since it is the simplest. The
`background' keyword must be followed by a color specification. That
color specification is used as a fill color for the background. The
last `background' special on a page is the one that gets issued, and it
gets issued at the very beginning of the page, before any text or
specials are sent. (This is possible because the prescan phase of
Dvips notices all of the color specials so that the appropriate
information can be written out during the second phase.)
The `color' special itself has three forms. The first is just
`color' followed by a color specification. In this case, the current
global color is set to that color; the color stack must be empty when
such a command is executed.
The second form is `color push' followed by a color specification.
This saves the current color on the color stack and sets the color to be
that given by the color specification. This is the most common way to
set a color.
The final version of the `color' special is just `color pop', with no
color specification; this says to pop the color last pushed on the
color stack from the color stack and set the current color to be that
color.
Dvips correctly handles these color specials across pages, even when
the pages are repeated or reversed.
These color specials can be used for things such as patterns or
screens as well as simple colors. However, note that in the
PostScript, only one color specification can be active at a time. For
instance, at the beginning of a page, only the bottommost entry on the
color stack is sent; also, when a color is popped, all that is done is
that the color specification from the previous stack entry is sent. No
`gsave' or `grestore' is used. This means that you cannot easily mix
usage of the `color' specials for screens and colors, just one or the
other. This may be addressed in the future by adding support for
different categories of color-like state.
File: dvips.info, Node: Index, Prev: Color, Up: Top
Index
*****
* Menu:
* ! special (literal PS header): Literal headers.
* ! starting output filename: Option details.
* " special (literal PostScript): " special.
* %%BoundingBox: Bounding box.
* %%Page, and multi-page information: PostScript hooks.
* %%Page, not generating: Option details.
* %%Page, removing: Option details.
* %%Page, required by Ghostview: Ghostscript installation.
* %%VMusage: Headers and memory usage.
* %*Font: Fonts in figures.
* (atend), bounding box specification: Bounding box.
* +PSMAPFILE: Configuration file commands.
* -: Option details.
* - as output filename: Option details.
* -A: Option details.
* -a: Option details.
* -B: Option details.
* -b NUM: Option details.
* -C NUM: Option details.
* -c NUM: Option details.
* -c RATIO: Afm2tfm options.
* -d NUM: Option details.
* -D NUM: Option details.
* -E: Option details.
* -e NUM: Option details.
* -e RATIO: Afm2tfm options.
* -F: Option details.
* -f: Option details.
* -h NAME: Option details.
* -help <1>: Option details.
* -help: Option summary.
* -i: Option details.
* -j for partial font downloading: Option details.
* -K: Option details.
* -k for cropmarks: Option details.
* -l [=]NUM: Option details.
* -M: Option details.
* -m: Option details.
* -mode: Option details.
* -mode MODE: Option details.
* -N: Option details.
* -n NUM: Option details.
* -O: Afm2tfm options.
* -o NAME: Option details.
* -O X-OFFSET,Y-OFFSET: Option details.
* -p [=]NUM: Option details.
* -P PRINTER: Option details.
* -p PS-ENC <1>: Afm2tfm options.
* -p PS-ENC: Changing PostScript encodings.
* -pp FIRST-LAST: Option details.
* -pp RANGE: Option details.
* -PPRINTER, and config file searching: Configuration file searching.
* -q: Option details.
* -R: Option details.
* -r: Option details.
* -s: Option details.
* -S NUM: Option details.
* -s SLANT: Afm2tfm options.
* -T ENC-FILE: Changing both encodings.
* -T HSIZE,VSIZE: Option details.
* -t PAPERTYPE: Option details.
* -T PS-TEX-ENC: Afm2tfm options.
* -t TEX-ENC <1>: Changing TeX encodings.
* -t TEX-ENC: Afm2tfm options.
* -u: Afm2tfm options.
* -U: Option details.
* -V: Option details.
* -V VPL-FILE: Afm2tfm options.
* -v VPL-FILE: Afm2tfm options.
* -version: Option details.
* -x NUM: Option details.
* -X NUM: Option details.
* -Y NUM: Option details.
* -z: Hypertext.
* -Z for compressing bitmap fonts: Option details.
* -z for recognizing hyperdvi: Option details.
* .afm Adobe metric files: Metric files.
* .dvipsrc, searched for: Configuration file searching.
* .enc extension for encoding vectors: psfonts.map.
* .lpro long prologue files: Header files.
* .mf Metafont source files: Glyph files.
* .NNNpk packed font bitmaps: Glyph files.
* .pfa extension required for partial downloading: psfonts.map.
* .pfa printer font ascii files: Glyph files.
* .pfb extension required for partial downloading: psfonts.map.
* .pfb printer font binary files: Glyph files.
* .pfm printer font metric files: Metric files.
* .pl property list files: Metric files.
* .pro prologue files: Header files.
* .tfm TeX font metric files: Metric files.
* /#copies: Option details.
* /magscale: EPSF scaling.
* 612 792 bounding box size: Bounding box.
* 8r encoding, and extra characters: Changing PostScript encodings.
* 8r font encoding: psfonts.map.
* 8r.enc: Encodings.
* < font downloading: psfonts.map.
* << whole font downloading: psfonts.map.
* <[ encoding vector downloading: psfonts.map.
* =: ligature operation: Encoding file format.
* @ paper size config command: Configuration file commands.
* \.: Reencoding with Afm2tfm.
* \AA: Reencoding with Afm2tfm.
* \COLORNAME: Color macro files.
* \dot: Reencoding with Afm2tfm.
* \epsffile macro: EPSF macros.
* \epsfsize: EPSF scaling.
* \epsfverbosetrue: EPSF macros.
* \epsfxsize: EPSF scaling.
* \epsfysize: EPSF scaling.
* \H: Reencoding with Afm2tfm.
* \leavevmode: EPSF macros.
* \magnification: EPSF scaling.
* \rotninety: Literal examples.
* \textCOLORNAME: Color macro files.
* a config command (memory conservation): Configuration file commands.
* A ring, Scandinavian letter: Reencoding with Afm2tfm.
* a3 papertype: Option details.
* a4 paper size, as default: Config file paper sizes.
* a4 papertype: Option details.
* absolute filenames, disabling: Option details.
* absolute page number, and -l: Option details.
* absolute page number, and -p: Option details.
* accents, in wrong position: Reencoding with Afm2tfm.
* accents, wrong: Afm2tfm options.
* accuracy in positioning: Option details.
* Adobe fonts: PostScript font installation.
* Adobe fonts, installing: PostScript font installation.
* afm files: Metric files.
* afm2tfm <1>: Invoking afm2tfm.
* afm2tfm: Making a font available.
* afm2tfm options: Afm2tfm options.
* Aladdin Ghostscript: Ghostscript installation.
* Anderson, Laurie: Hypertext specials.
* arcs: Glyph files.
* ASCII character codes, used by PostScript: PostScript typesetting.
* atend, bounding box specification: Bounding box.
* b config command (#copies): Configuration file commands.
* base: Hypertext specials.
* base encoding, recommended: psfonts.map.
* base fonts: Virtual fonts.
* bbfig: Bounding box.
* Bhattacharya, Tanmoy: Hypertext.
* big points: Bounding box.
* Bigelow & Holmes fonts: PostScript font installation.
* binary files, not supported: Including graphics fails.
* bitmap fonts: Glyph files.
* Bitstream fonts, installing: PostScript font installation.
* bop undefined error: Printer errors.
* bop-hook <1>: EPSF scaling.
* bop-hook: PostScript hooks.
* bop-hook, and offset pages: Option details.
* boundary character: Encoding file format.
* bounding box, comment for: Bounding box.
* bounding box, defined: Bounding box.
* bounding box, determining: Bounding box.
* bounding box, finding tight: Option details.
* bounding box, inaccurate: EPSF clipping.
* bounding box, supplying to TeX: EPSF macros.
* changing PostScript encodings: Changing PostScript encodings.
* changing TeX encodings: Changing TeX encodings.
* character definitions in PostScript: PostScript typesetting.
* character lookup procedure in PostScript: PostScript typesetting.
* CharStrings Type 1 dictionary: PostScript typesetting.
* clipping of EPSF: EPSF clipping.
* CODINGSCHEME: Reencoding with Afm2tfm.
* collated copies: Option details.
* color: Color.
* color configuration: Color device configuration.
* color macros: Color macro files.
* color names, mixed case: Color macro files.
* color nesting level: Color macro files.
* color separations: Option details.
* color specifications: Color specifications.
* color subtleties: Color subtleties.
* colors, user-definable: User-definable colors.
* command line, including headers from: Including headers from the command line.
* command-line options: Invoking Dvips.
* comments, in configuration files: Configuration file commands.
* comments, in encoding files: Encoding file format.
* comments, removing included: Option details.
* compilation: Installation.
* compressed PostScript: Dynamic creation of graphics.
* compressing bitmap fonts: Option details.
* Computer Modern in PostScript: Hypertext caveats.
* Computer Modern, encoding of: Encodings.
* condensed fonts: Afm2tfm options.
* config.proto: config.ps installation.
* config.ps: Option details.
* config.ps installation: config.ps installation.
* config.ps, searched for: Configuration file searching.
* configuration file options: Configuration file commands.
* configuration file paper size command: Config file paper sizes.
* configuration file path: Environment variables.
* configuration file searching: Configuration file searching.
* configuration files: Config files.
* configuration files, creating: config.ps installation.
* configuration files, prototype: config.ps installation.
* configuration, of color devices: Color device configuration.
* configuration, of Dvips: Installation.
* continuation lines, not supported: Configuration file commands.
* control-D: Option details.
* copies, collated: Option details.
* copies, duplicated page bodies: Option details.
* copies, uncollated: Option details.
* Crayola crayon box: Color macro files.
* crop.pro: Option details.
* cropmarks: Option details.
* current font, in PostScript: PostScript typesetting.
* D config command (dpi): Configuration file commands.
* dated output: PostScript hooks.
* datestamp, in output: Configuration file commands.
* debugging <1>: Diagnosing problems.
* debugging: Option details.
* debugging options: Debug options.
* default resolutions: Configuration file commands.
* default_texsizes Make variable: Configuration file commands.
* Deutsch, Peter: Ghostscript installation.
* device dependency, and virtual fonts: Configuration file commands.
* dictionary, CharStrings: PostScript typesetting.
* dictionary, PostScript language: PostScript typesetting.
* dictionary, SDict: Literal headers.
* dictionary, userdict: Header files.
* distillation, and -z: Option details.
* distiller, for PDF files: Hypertext.
* dot accent: Reencoding with Afm2tfm.
* double-sided printing: Option details.
* downloading fonts partially: psfonts.map.
* downloading PostScript fonts: psfonts.map.
* Doyle, Mark: Hypertext.
* draft copies: PostScript hooks.
* dual paper trays: Paper trays.
* duplex printers: Including headers from the command line.
* DVI magnification: EPSF scaling.
* dvihps, hyperdvi to PostScript: Hypertext.
* Dvips configuration file options: Configuration file commands.
* dvips.enc: Encodings.
* DVIPSFONTS: Environment variables.
* DVIPSHEADERS: Environment variables.
* DVIPSHEADERS, overrides H: Configuration file commands.
* DVIPSMAKEPK: Environment variables.
* DVIPSRC: Environment variables.
* DVIPSSIZES: Environment variables.
* DVIPSSIZES, overrides R: Configuration file commands.
* dynamic creation of graphics: Dynamic creation of graphics.
* e config command (maxdrift): Configuration file commands.
* E config command (shell escape): Configuration file commands.
* efficiency, and fonts: Making a font available.
* ehandler.ps: No output.
* encoding changes: Changing font encodings.
* encoding file format: Encoding file format.
* encoding files: Encodings.
* Encoding Type 1 dictionary: PostScript typesetting.
* encoding vectors, defined: Encodings.
* encoding vectors, in Type 1 fonts: PostScript typesetting.
* encodings: Encodings.
* end-hook: PostScript hooks.
* environment variables: Environment variables.
* EOF: Option details.
* eop-hook: PostScript hooks.
* EPS, and Ghostview: Ghostscript installation.
* EPSF macros: EPSF macros.
* EPSF, generating: Option details.
* epsf.sty: EPSF macros.
* epsf.tex: EPSF macros.
* Epson printers: Ghostscript installation.
* error messages from printer: Printer errors.
* even pages only: Option details.
* examples of literal PostScript: Literal examples.
* expanded fonts <1>: Special font effects.
* expanded fonts <2>: Afm2tfm options.
* expanded fonts: psfonts.map.
* expansion, of virtual fonts: Virtual fonts.
* extended URL: Hypertext specials.
* ExtendFont: Special font effects.
* extra characters, accessing: Changing PostScript encodings.
* f config command (filter): Configuration file commands.
* F config command (filter): Configuration file commands.
* failure, and printer errors: Printer errors.
* failure, of long documents: Long documents fail.
* failure, to include graphics: Including graphics fails.
* failure, to print at all: No output.
* fallback resolutions: Configuration file commands.
* figures and fonts: Fonts in figures.
* figures, natural size: EPSF macros.
* figures, scaling: EPSF scaling.
* filter, running as a: Option details.
* first page printed: Option details.
* font concepts: Font concepts.
* font generation, avoiding: Option details.
* fontinst: Invoking afm2tfm.
* fonts, as header files: Including headers from TeX.
* fonts, changing encoding of: Changing font encodings.
* fonts, downloading: psfonts.map.
* fonts, expanded: Special font effects.
* fonts, in PostScript figures: Fonts in figures.
* fonts, installation of PostScript: PostScript font installation.
* fonts, installing: Making a font available.
* fonts, outlined: Special font effects.
* fonts, slanted: Special font effects.
* fonts, small caps: Special font effects.
* fonts, system PostScript: PostScript font installation.
* gf files: Glyph files.
* gftopk: Glyph files.
* Ghostscript installation: Ghostscript installation.
* ghostview: Ghostscript installation.
* Ghostview, and no N: Ghostscript installation.
* glyph files: Glyph files.
* GLYPHFONTS, overrides P: Configuration file commands.
* GNU Ghostscript: Ghostscript installation.
* gnuplot: Dynamic creation of graphics.
* graphics inclusion fails: Including graphics fails.
* gs installation: Ghostscript installation.
* gsave/grestore, and literal PS: Literal examples.
* gsftopk: Option details.
* h header downloading config command: Configuration file commands.
* H header path config command: Configuration file commands.
* Hafner, Jim: Color.
* header file, downloading: Option details.
* header files, defined: Header files.
* header path, defining: Configuration file commands.
* header=FILE \special: Including headers from TeX.
* headers and memory usage: Headers and memory usage.
* headers, including from the command line: Including headers from the command line.
* headers, including in TeX: Including headers from TeX.
* hints: PostScript typesetting.
* HP printers and Type 1 fonts: PostScript font installation.
* HP4Si printer and paper trays: Paper trays.
* href: Hypertext specials.
* html specials: Hypertext.
* html specials, and -z: Option details.
* http://www.win.tue.nl/~dickie/idvi: Hypertext.
* http://xxx.lanl.gov/hypertex: Hypertext.
* Hungarian umlaut: Reencoding with Afm2tfm.
* hyperdvi extensions, enabling: Option details.
* hypertext and bitmap fonts: Hypertext caveats.
* hypertext caveats: Hypertext caveats.
* hypertext specials: Hypertext specials.
* hypertext support: Hypertext.
* i config command (pages/section): Configuration file commands.
* idvi Java DVI reader: Hypertext.
* Illustrator, workaround for: Including graphics fails.
* img: Hypertext specials.
* including graphics fails: Including graphics fails.
* including headers from the command line: Including headers from the command line.
* including headers in TeX: Including headers from TeX.
* installation of config.ps: config.ps installation.
* installation of PostScript fonts: PostScript font installation.
* installation, of Dvips: Installation.
* installing fonts: Making a font available.
* interaction with PostScript: Interaction with PostScript.
* inverted output: Small or inverted.
* invoking Dvips: Invoking Dvips.
* j config command (partial font downloading): Configuration file commands.
* Java DVI reader: Hypertext.
* Jeffrey, Alan: Invoking afm2tfm.
* K config command (comment-removeal): Configuration file commands.
* kerning, defined: Metric files.
* landscape orientation, defined: Paper size and landscape.
* landscape papertype: Option details.
* landscape, as \special: papersize special.
* last page printed: Option details.
* last-resort font scaling, with DVIPSSIZES: Environment variables.
* last-resort scaling, with R: Configuration file commands.
* ledger papertype: Option details.
* legal papertype: Option details.
* letter papertype: Option details.
* letterhead tray: Paper trays.
* ligature operations: Encoding file format.
* ligature, defined: Metric files.
* LIGKERN encoding file command: Encoding file format.
* lines in figures, wrong width: EPSF clipping.
* links, hypertext: Hypertext specials.
* literal headers: Literal headers.
* literal PostScript, examples: Literal examples.
* literal PostScript, using: Literal PS.
* long documents not printing: Long documents fail.
* lpr spooler, MS-DOS emulation: Option details.
* Lucida, installing: PostScript font installation.
* m config command (available memory): Configuration file commands.
* M config command (mf mode): Configuration file commands.
* macros for color: Color macro files.
* macros for epsf inclusion: EPSF macros.
* magnification, DVI: EPSF scaling.
* magnification, overriding DVI: Option details.
* magnification, vertical: Option details.
* mailcap and hypertext: Hypertext specials.
* manual feed: Option details.
* maxdrift: Option details.
* maximum pages printed: Option details.
* media: Option details.
* memory available: Configuration file commands.
* memory of printer exhausted: Printer errors.
* memory usage, and headers: Headers and memory usage.
* memory, conserving: Option details.
* memory, used by PostScript fonts: Making a font available.
* Metafont ligature operations: Encoding file format.
* Metafont mode, specifying: Option details.
* Metafont source files: Glyph files.
* metric files: Metric files.
* Minion typeface family: psfonts.map.
* missfont.log: Option details.
* MISSFONT_LOG: Option details.
* Mitsubishi Shinko CHC-S446i printer: No output.
* mkdvipspapers: Config file paper sizes.
* mktexpk, avoiding: Option details.
* mktexpk, changing name: Environment variables.
* mode name, specifying: Option details.
* Monotype fonts: PostScript font installation.
* Monotype fonts, installing: PostScript font installation.
* mtpk: Option details.
* multiple master fonts: psfonts.map.
* multiple output files: Option details.
* multiple paper trays: Paper trays.
* Murphy, Tim: Hypertext specials.
* N EPS-disabling config command: Configuration file commands.
* name: Hypertext specials.
* narrow fonts: psfonts.map.
* no output at all: No output.
* non-resident fonts: psfonts.map.
* O config command (offset): Configuration file commands.
* o config command (output file): Configuration file commands.
* oblique fonts: Special font effects.
* octal character codes: Afm2tfm options.
* odd pages only: Option details.
* offset pages: Option details.
* option, details of: Option details.
* options, debugging: Debug options.
* options, Dvips: Invoking Dvips.
* options, reading from standard input: Option details.
* options, summary: Option summary.
* options, to Afm2tfm: Afm2tfm options.
* outline fonts <1>: Glyph files.
* outline fonts: Special font effects.
* output file, sectioning of: Headers and memory usage.
* output file, setting: Configuration file commands.
* output files, multiple: Option details.
* output, inverted: Small or inverted.
* output, none: No output.
* output, redirecting: Option details.
* output, too small: Small or inverted.
* p config command (font aliases): Configuration file commands.
* P config command (PK path): Configuration file commands.
* page range: Option details.
* page, first printed: Option details.
* page, last printed: Option details.
* pages, maximum printed: Option details.
* PaintType: Special font effects.
* Pantone colors: Color macro files.
* paper size configuration file command: Config file paper sizes.
* paper size, default: config.ps installation.
* paper size, general: Paper size and landscape.
* paper trays: Paper trays.
* paper type: Option details.
* papersize special: papersize special.
* partial font downloading: psfonts.map.
* PDF files, making <1>: Ghostscript installation.
* PDF files, making: Hypertext.
* PDF files, option for: Option details.
* pdfmark: Hypertext.
* pfa files: Glyph files.
* pfb files: Glyph files.
* pfb files, automatically unpacked: psfonts.map.
* pfm files: Metric files.
* Phaser printer, used for color calibration: Color device configuration.
* physical page number, and -l: Option details.
* physical page number, and -p: Option details.
* physical page number, and bop-hook: PostScript hooks.
* pipes, disabling output to: Option details.
* pipes, not readable: Option details.
* pk files: Glyph files.
* PKFONTS, overrides P: Configuration file commands.
* plotfile, ps subspecial: ps special.
* pltotf: Metric files.
* popen for output: Option details.
* positioning accuracy: Option details.
* PostScript code, literal: Literal PS.
* PostScript encoding: Encodings.
* PostScript encoding, changing: Changing PostScript encodings.
* PostScript font alias file: Configuration file commands.
* PostScript fonts: PostScript fonts.
* PostScript fonts, installing: PostScript font installation.
* PostScript fonts, on your system: PostScript font installation.
* PostScript header files: Header files.
* PostScript hooks: PostScript hooks.
* PostScript interaction: Interaction with PostScript.
* PostScript previewers: Ghostscript installation.
* PostScript units: Bounding box.
* PowerPage PostScript implementation: No output.
* previewing Dvips output: Ghostscript installation.
* PRINTER: Environment variables.
* printer configuration: config.ps installation.
* printer configuration file, prototype: config.ps installation.
* printer errors: Printer errors.
* printer memory: Configuration file commands.
* printer memory exhausted: Printer errors.
* printer offset: Option details.
* PRINTER, and config file searching: Configuration file searching.
* PRINTER, avoided with -f: Option details.
* printer, driving directly: Option details.
* problems: Diagnosing problems.
* property list files: Metric files.
* prototype printer configuration file: config.ps installation.
* ps special: ps special.
* psfile special: psfile special.
* psfonts.map <1>: Special font effects.
* psfonts.map <2>: psfonts.map.
* psfonts.map: PostScript font installation.
* psheaderdir: Header files.
* psi character missing: Hypertext caveats.
* pstopk: Option details.
* q config command (quiet): Configuration file commands.
* Q config command (quiet): Configuration file commands.
* quiet operation: Option details.
* r config command (page reversal): Configuration file commands.
* R fallback resolution config command: Configuration file commands.
* reencode/*.enc: Encodings.
* reencoding: Reencoding with Afm2tfm.
* reencoding PostScript fonts: psfonts.map.
* registered character, accessing: Changing PostScript encodings.
* remapping: Reencoding with Afm2tfm.
* resident fonts, different in different printers: Configuration file commands.
* resolution: Option details.
* resolution, setting: Option details.
* reverse pagination: Option details.
* Rokicki, Tomas: Why Dvips.
* rotate.tex: ps special.
* S config command (pict path): Configuration file commands.
* s config command (save/restore): Configuration file commands.
* save/restore, and inverted output: Small or inverted.
* save/restore, and literal PS: Literal examples.
* save/restore, and specials: ps special.
* save/restore, generating global: Option details.
* scaleunit: psfile special.
* scaling of figures: EPSF scaling.
* scaling small caps: Afm2tfm options.
* Scandinavian A ring: Reencoding with Afm2tfm.
* screen frequencies, setting: Including headers from the command line.
* SDict: psfile special.
* SDict dictionary: Literal headers.
* searching config files, order of: Configuration file searching.
* sections of output file, and memory: Headers and memory usage.
* sections output, in separate files: Option details.
* security: Option details.
* shell command execution, disabling: Option details.
* shell escape, in config file: Configuration file commands.
* Shinko CHC-S446i printer: No output.
* show PostScript operator: PostScript typesetting.
* silent operation: Option details.
* simplex mode on duplex printers: Including headers from the command line.
* slanted fonts: Special font effects.
* slanted fonts, making: Afm2tfm options.
* SlantFont: Special font effects.
* small caps fonts: Special font effects.
* Smith, Arthur: Hypertext specials.
* Softkey fonts: PostScript font installation.
* Softkey fonts, installing: PostScript font installation.
* spaces, dropped trailing: Hypertext caveats.
* specials, hypertext: Hypertext specials.
* splines: Glyph files.
* spooler, lacking: Option details.
* spooling to lpr on MS-DOS: Option details.
* standard I/O: Option details.
* standard input, reading options from: Option details.
* standard output, output to: Option details.
* standard PostScript, required by Ghostview: Ghostscript installation.
* start-hook: PostScript hooks.
* structured comments: Option details.
* system in config file: Configuration file commands.
* T config command (TFM path): Configuration file commands.
* Tektronix Phaser printer, used for color calibration: Color device configuration.
* testpage.tex: Option details.
* TeX encoding, changing: Changing TeX encodings.
* TeX, including headers in: Including headers from TeX.
* TEXCONFIG: Environment variables.
* TEXFONTS, overrides P: Configuration file commands.
* TEXFONTS, overrides T: Configuration file commands.
* TEXINPUTS, overrides S: Configuration file commands.
* texmext.enc: Encodings.
* TEXMFOUTPUT: Option details.
* texmital.enc: Encodings.
* texmsym.enc <1>: Encodings.
* texmsym.enc: Changing TeX encodings.
* TEXPICTS: Environment variables.
* TEXPICTS, overrides S: Configuration file commands.
* TEXPKS, overrides P: Configuration file commands.
* TEXSIZES, overrides R: Configuration file commands.
* text in figures, chopped off: EPSF clipping.
* tfm files: Metric files.
* TFMFONTS, overrides T: Configuration file commands.
* tftopl: Metric files.
* Theisen, Tim: Ghostscript installation.
* tight bounding box, finding: Option details.
* too-small output: Small or inverted.
* trademark character, accessing: Changing PostScript encodings.
* trailing spaces, dropped: Hypertext caveats.
* TranScript: Option details.
* transforming downloaded fonts: psfonts.map.
* trouble: Diagnosing problems.
* Type 1 fonts: Glyph files.
* typesetting in PostScript: PostScript typesetting.
* U config command (Xerox 4045): Configuration file commands.
* uncollated copies: Option details.
* uncompressing PostScript: Dynamic creation of graphics.
* uniform resource locator: Hypertext specials.
* URL, definition: Hypertext specials.
* URL, extended for TeX: Hypertext specials.
* user-definable colors: User-definable colors.
* userdict, and dictionary files: Header files.
* userdict, used for header files: Option details.
* V config command (vf path): Configuration file commands.
* verbose EPSF processing: EPSF macros.
* vf files: Virtual fonts.
* virtual font expansion: Virtual fonts.
* virtual font path: Configuration file commands.
* virtual fonts: Virtual fonts.
* virtual fonts, creating: Invoking afm2tfm.
* VM exhausted: Printer errors.
* VMusage: Headers and memory usage.
* vpl files: Virtual fonts.
* vptovf: Making a font available.
* W config command (warning): Configuration file commands.
* warning messages, defining: Configuration file commands.
* warnings, suppressing: Option details.
* whole font downloading: psfonts.map.
* wide fonts: psfonts.map.
* X config command (horizontal resolution): Configuration file commands.
* Xerox 4045: Option details.
* Y config command (vertical resolution): Configuration file commands.
* Y&Y fonts, installing: PostScript font installation.
* Z config command (compression): Configuration file commands.
* | starting output filename: Option details.
|
